GeilSpace 30" Industrial Pipe Table Legs, Metal Pipes and Flanges for Custom Vintage Tables and Furniture, Rustic DIY Desk Legs, Shelf Support, Set of 4 (1" × 30", Black)

I installed an antenna mast near an 'inside corner' of the exterior of my house. I used a 21' piece of 1 5/8" 16-gauge chain link fence top rail for the mast. I buried it 4' in the ground but needed to secure it to the two walls. These legs were perfect for the task since they were just the right length to get past the eaves and gutters and reach the mast.I attached two legs horizontally to each wall, about 4' and 8' from the ground using hammer set sleeve anchors. I did have to drill out the flange holes just a little so that the 1/4" anchors could go though the them.To attach the other flange of each leg to mast, I found u-bolts that were just the right width to fit into two of the flange holes. Again I had to drill out the flange holes just a little so that the u-bolts could pass through.The mast is now solidly attached to the walls. The vendor certainly cannot guarantee that this is an appropriate use of their product. Likewise I am not recommending this. I am just sharing what I used the legs for.

Ordered these table legs because quite frankly I was too lazy to go to home depot and buy the individual pieces of pipe and paint, and honestly these legs are of much better quality and finish than what I could of done myself.They are very sturdy and have great weight to it, the paint is high quality and has an even coating.Was the final piece to complete my new covid desk and I am so happy with the way it turned out.Only thing about this product is that the pieces are a bit tough to screw on all the way but thats because it has a quality paint job over the entire piece, I just kept twisting the pieces together until it screwed on all the way but dont let this aspect prevent you from getting this product, very high quality and looks amazing.

Used these to mount some privacy curtains on my pergola. I live in a windy area and needed something to secure curtains on top and bottom. These table legs were perfect. Super easy to attach and the quality is amazing. Item was well packaged for shipping too. Included screws were a surprise! Will definitely order again when I decide to put curtains on the other side of the pergola.

I am using these to make a poker table. Quality is good with a nice paint job. I like that they came without the layer of grease that comes on some cast iron legs. Only negative is that the threads are not all the same meaning that the flanges are hard to screw on to the same length. I'm sure I will be able to make it work but it will be a pain in the ass. Thread protectors on the on the ends of the pipe would probably eliminate this. All-in-all, I am happy with them and will buy another set or two.

I used these 30" legs to create and hold a shelf over my TV on my TV stand so that I could utilize some space above it and place seasonal items. Mine came all the same length and size and the screws were included. The board for my shelf was 1/2" thick, so the screws included would have been slightly too long for my use, but I simply utilized some leftover washers and it turned out perfect (make sure you have washers or shorter screws ready if you are screwing it into a thin board!). I did have a small issue with one of the legs had a little difficulty screwing into one of the flanges as much as the others, likely due to the paint as the listing directly states could be expected, but it was easy to fix and level out in the end with minor effort. They are very sturdy and strong and I'm confident they would hold a pretty sturdy weight as long as the board they are screwed to can support the weight too. Overall, I am very pleased and satisfied with my purchase.

I was making a custom computer desk for a friend. My only issue was that due to the coating on the threads, I had a hard time tightening the legs into the flanges (I'm older and not so strong as I was 20 years ago). So there was some wobble until I was able to get the legs tightened. The project came out beautiful.

I purchased these legs to use in hanging a cabinet from the ceiling over a bar in my new house. They provide the strength needed to support the heavy cabinet, but look so much better than the galvanized pipes from the plumbing department. They have a shiny black finish that looks nice. I am very pleased with this purchase.

The legs and flanges themselves were solid and beefy enough. The screws included, however, looked like hobbyist wood screws. So I bought some hefty #14 wood screws. As I went to test them out, I noticed that the tiny baggy that contained the screws had been not only punctured but its zip closure had popped open in transfer -- since the legs were encased in thin plastic, there were screws between all the pipes, causing a few deep scrapes/gashes in the black paint finish. I reluctantly returned them and did not reorder, as I can't guarantee the reorder wouldn't have the same issues. I ended up getting some black pipe custom threaded for about $25 more at a local hardware store. Seemed like a decent product, though, compared to some others that had reviews about how dirty/greasy the similar products from other sellers were.

Llevo varios meses con ellas. He cambiado la posición de las patas pero digo si entiendo inestabilidad en la mesa.Si funciona pero se mueven mucho