FoamTouch Upholstery Foam 2" x 24" x 72" High Density Cushion, white

(Maybe they're new since I bought, but I now see there are other sizes available.) I used this to reupholster 6 beat-up Ikea chairs that I got for free (roughly, top: 17", bottom: 13.5, depth: 15.25; 44/35/39 cm). If you measure carefully and layout efficiently, you can cut 4 chair covers in single pieces. The remaining two you can create by gluing together pieces of the leftovers. The 2" thickness of high density, 44 pound-rated, foam is great for firm but comfortable dining chairs. I can't speak to durability, though others have. My only gripe is that this is only available (on Amazon) in 2x24x72. It's possible to do 6 chairs with this size, but there was very little room for mistakes. It would be nice to have wider and/or longer options for a project like this, without having to buy 2 full pieces. To glue, spray each edge that you want to attach with 3M Super 77 adhesive. (Do it outside - it gets all over the place.) I made 3 or 4 sweeps, a few seconds each; you want the edge moistened, but not soaked. Wait 15 seconds. Line up the ends and push together. Alignment doesn't have to be perfect, but if you miss by a lot, you have a few seconds to pull apart and try again. Wait 30 seconds, until they stick together when suspended by one of the pieces. Give it a good smoosh so that there's contact along the whole length of the edge. Let the glue set for at least 30 minutes before using the glued piece on furniture. Works great. Even if you try not to spray yourself or touch any of the wet glue edges, you'll probably need some acetone to clean up your hands. To cut, the pros use specialty foam cutters. I tried their recommendation to substitute with reciprocating meat knives. It works but not well. I discovered it's much easier and more accurate to use a cheap utility knife with a sharp blade. Mark your lines with a Sharpie. Score the line with the knife using light/medium pressure - just a little into the surface, not all the way. Once scored, make 3 or 4 more slightly harder passes with the knife held vertically, separating along the score line with the fingers of your other hand. You'll get a line that's as true as your score line and reasonably clean - certainly good enough for spray gluing edges. I needed about 2 yards of fabric, which I got from a remainders pile for $20. A can of spray paint for the wood, and I have 6 decent dining chairs - much plusher, softer, and more attractive than the original Ikeas - for about $10 each.

This is great foam. Bought the 3" for dining room chairs. I can sit on it and I don't bottom out!

Perfect!!!

Ordered foam to replace 3 out of 6 couch cushions. Pillows measure exactly 24x24 so 3 would be 72 total inches. CON: The foam that I received was 69 inches so one of my cushions were 3 inches too short. Had to insert 3 inches of the old foam to fill the insert. Disappointing to say the least. PROs: Now in regards to the foam, it is a great overall value for the thickness. The foam is firm yet it’s comfortable. It does have a little give when sitting on it. Definitely provides support when sitting on. Have to order another one to change out the remaining 3 cushions.. hoping I get the full 72 inches. Gave it 4 stars due to the incorrect length

I had needed to reupholster my vintage bent bamboo loveseat and had researched numerous different manufacturers that offered 6in foam pads within a reasonable price range. In the past I have bought 6in foam pads that were barely 4.5-5in thick, no matter where I purchased it from. I recently came across this one on Amazon and I was intrigued but certainly skeptical. It didn't come in the size I needed so I had to purchase a longer size, which wasn't a big deal for me. After measuring out what I needed, I simply used my electric knife from 1982- and it cut as smoothly as butter! I have to admit, I couldn't be more impressed by this product in more ways tan one! Usually, these products have to "sit" for 24-48hrs to obtain their "full potential thickness" (which is basically a joke so in 48hrs you're too frustrated to deal with the hassle to return it) BUT not with this product! The moment I broke the seal of plastic it swelled up 300x than what I pulled out of the delivery box and I knew that I finally found the perfect product! By the 2nd hour, it was already 6in thick! It is very comfortable, not too firm but firm enough! My daughter has already declared it as "her reading couch " and as been sitting in it for 6-8hrs-throughout entire night reading and it shape returns to looking brand new, the moment she gets up and walks away! I am so impressed with this product that I am planning to replace the sagging cushions on my sofa (that is barely 2yrs old by the way) and I can not wait! No regrets!

Bought this to add an upholstered cushion to my wooden antique chairs that were only covered in a thin piece of leather. The thickness of the foam is uniform throughout the piece, extremely comfortable and feels firm enough to keep its shape. I had considered using a memory foam instead but I am so happy I purchased this! Make sure you have a large and sharp pair of scissors to cut as it is quite thick, Will definitely be buying more of this product now that I see how great the quality is!

Good

this was perfect for my patio set. easy to cut, and it's so much more comfortable than the original foam I had in my patio set. I enjoyed sitting on my set even more now, as it doesn't go flat.

Sirvió muy bien.

Eh estado usando la espuma como una colchoneta y no a perdido su forma en ningún momento, ya llevo poco mas seis meses con el.