Hopkins Towing Solutions46105 Four-Flat Universal Trailer Connection Kit

confirmed working on my 2013 Suzuki SX4 hatchback Crossover. Easy Install.For other SX4 users, heres your wires and what they do:Blue wire on right side is the right blinkerGreen wire with Red Stripe on left side goes to the left blinkerGreen wire with White Stripe on the left side goes to the brakesThe Ground wire didn't fit on my grounding bolt, so I snipped the end of the metal ring on the terminating end so that it would widen just enough to go on my grounding bolt.Working fine and great price compared to the 45$ they were asking for the "Official" Sx4 KitTester is a nice touch, and verified everything was working. total install time was about an hour, probably goes much faster if you know what you're doing and aren't simultaneously keeping your eye on a 5 year old.Beat the hell out of every other price out there, and does what I need it to do.

Haven't used it yet, but it was very easy to install in my 2010 Mazda 5. Only took me about an hour, so a competent person would be done in no time. There is no need to run a wire to the front of the vehicle with this kit. Three wires connect near one tail light, the other wire runs under the trunk trim to the opposite tail light. Once you gain access to the wires, use the little probe to see which wire is the brake, and which is the blinker etc. Identify "left blinker," for example, and then the instructions say which kit wire should be spliced into the left blinker. Slide one of the little blue connectors around your car's wire, push the end of the kit's wire into the hole and snap it closed. It is pre-filled with some goo to keep water out. I had a little trouble getting them to snap by hand, but no problem with little pliers. The electrical aspect of this job was easier than the task of getting to the wires. I also ordered a Automotive Installer Pry Tool kit for about $5 and it was worth it to help pop the trim panels on this job.

This plug works very well as a new or replacement trailer connection on the car or truck. The plug is well constructed and molded to be quite weather resistant, and comes with a tube of silicone grease to keep water from corroding the contacts. When connected to the trailer side it makes a very firm connection so I know it isn't going to wiggle loose going down the road. I'm pretty happy with it.

These is a phenomenal quality and versatile item for $10. It was constructed well and had easy mounting. I am planning on getting more when needed. Even comes with a pack of dielectric grease.

heavy wires, heavy plastic, heavy cover and a wire loom. this thing rocks and i am sold on it 100%

I should’ve replaced my OEM connector years ago due to corrosion. This one even slid into the original connector bracket. And plenty of wire. This connector is thicker than the OEM connector.

Exactly as described.

This is a very well-made, heavy-duty, high quality piece. The mount holes to allow fixed attachment are very helpful. Plenty of wire is given to allow patch-in to rear vehicle wiring.