BOJACK 7.5 uF ±6% 7.5 MFD 370V/440V CBB65 Oval Run Start Capacitor for AC Motor Run or Fan Start and Cool or Heat Pump Air Conditione

Exactly as described and fit perfectly. It was very easy to replace. My old capacitor went out. This one was the exact match from size and shape. It seems to be well built and functions as expected.

It works! I don’t know what else to say haha. Economical replacement capacitor for a PSC fan motor.

Received later than expected but still was next day delivery. This was a direct replacement to the run capacitor on our furnace blower motor and it fixed the problem. Took only a few minutes to replace.To summarize our experience, our AC quit working during the first heat wave this year. I first checked the evaporator coil above the furnace and it was covered in ice. Typically the culprit is a dirty or clogged air filter. Let it thaw and dry overnight then the next morning I turned the AC back on and noticed a humming sound from the furnace. Opened up the furnace to see that the blower fan was not working. When I turned the squirrel cage of the blower by hand it felt smooth and easy to turn. So I gave the squirrel cage a good spin and turned on the AC again and it came to life. Suspecting the run capacitor I ordered one and it did the trick. Saved us a bunch of money avoiding a weekend call out from a HVAC contractor.

The capacitor works, and definitely saved us a lot of money. The HVAC technician offered to replace the old capacitor and clean the blower motor blades for $1100, and we said we'd do it ourselves. Hard to say how much the capacitor alone saved us, but suffice it to say, it was probably several hundred dollars.That said- it should be noted, it seems that this capacitor was fully charged when it arrived. I typically wear boots with fairly thick rubber soles, as well as Maxiflex gloves which have a thick nitrile layer, when handling line voltages (120VAC). With this level of protection, while not technically rated for 120VAC, I can touch live/line sides of 120VAC circuits and not feel anything, not even so much as a tingle. But when installing this new capacitor, wearing these boots and gloves, I attached the wires' terminal connectors by hand, and used my index finger to firmly press them in place. When I pressed the first of them into place, nothing unusual happened. But when I pressed the second terminal into place, I felt a slight zap, through the gloved finger.This suggests that I was bridging at least 300 volts to ground, which really surprised me. So buyer beware, handle these capacitors with care.

Specs on the capacitor were correct and very simple to replace.

After watching several Youtube videos, I ordered this based upon the ratings on my old one. It took only 15 minutes to install this component and get my AC unit running again. I tested this capacitor to verify that it is within spec prior to installing it. I matched at 7.5. After attaching the wires, make sure you take a pic prior to removing the wires, I discharged both the old and new cap just to be safe. The old one had a bulge at the top, so it was definitely bad. Once I connected the new cap and reattached the ac sides. Everything worked as expected. With a little research and watching Youtube videos, this cap saved me a service call. Planning to buy a backup for the future.

good replacement, a little longer than my previous one but good fit regardless.

Item exactly as described and works perfectly.