Gates 21871 Premium Molded Coolant Hose

This fit my 97 CRV good.

Fit is okay. No major issues, but slightly different shape from OEM making it lean left almost touching air filter housing, and not quite straight through one green clip just left of the engine. But fit is acceptable and it works just fine. Fit nice and snug on the radiator end and thermostat housing on the other end. Took a little effort to wiggle on, I'd say perfect sizing.Seems well enough made if not quite up to OEM quality.Got this as my radiator had a slow leak and figured I'd replace the hoses as they were original and almost 20 years old. Looking at them closer I could have kept them a while longer - used a heat gun and they slid off nicely with no damage.If you replace this hose you might want to do the thermostat too as it's at one end of this hose and you have to pull this hose to get the housing open (2 bolts on top right and lower left). I used this thermostat  this thermostat  as it was a good value and included the gasket - at 180F it's 10F higher than OEM 170F which is fine by me. Glad I did mine; the original thermostat had rubber falling apart on it.BTW if you are needing the radiator for a 1st gen CRV too the  Denso 221-3209 Radiator  fit my 98 CRV perfectly and works great.

Ok got the job done

Perfect fit on 98 Honda CRV

It fit perfectly on my 2001 CR-V

Fit like it should and got the job done on our 2000 crv.

It fits a 1998 CR-V and was easy to install. I have only had it in place for a couple of weeks so no long term durability info.

No issues fit perfect