HIDBEA Frosted Glass Window Privacy Film,Static Cling 35.4 in x 8.2 ft

We have narrow windows on either side of our front door. It's been a headache trying to figure out how to create privacy with them. Nobody sells blinds that narrow, curtains looked weird, and our attempts to DIY install traditional window tint went poorly. Thought I'd give this a try and I'm glad we did. It's not nearly as finicky as the window tint was. I was able to install it cleanly on the first try and am happy with the results. It looks intentional and if I didn't know it was film, I'd believe the window was just frosted glass. I strongly suggest spending $10 on one of the "window tint kits" here on Amazon for the install. They come with an exacto knife, which is precisely what you'll want to cut the excess film with. They also come with the little trim lifter tool you'll want. Basically, you'll want to clean the window first with windex. Then use a spray bottle with water and a couple drops of dish soap to wet the entire glass with. Apply and smooth the film, leaving some overhang on each side. Use the exacto knife to carefully cut the film where the glass meets the window trim. The last step is how you get clean edges: use the tool from the tint kit to carefully lift the edge of your window trim, and slide it around the entire length of the window on all sides. This will let the edge of the film sit under the trim, rather than butting up against it.

I cut it uneven so I’ll have to redo it eventually but it was easy to apply and definitely not see through! Put this on a vertical window I have next to my front door so people can’t see into my house

This was so easy to put on! We used it to add to our glass doors in the TV stand to hide games etc. There are bubbles, but they can’t be seen because there’s no sun behind. Definitely could have used a card to scrape them out. Had no issues with edges being uneven. Took off one star because we had to take the corners down, but otherwise love the product.

I recently installed the HIDBEA Frosted Window Privacy Film on my front door, and I couldn't be happier with the results. If you are looking for an effective way to balance natural light with home privacy, this is a fantastic choice. Stress-Free Installation: As someone who usually dreads DIY projects involving adhesives, the static cling design was a game-changer. It was incredibly easy to reposition during the process, and since there’s no glue, there’s zero sticky mess to worry about. Instant Curb Appeal: It looks clean and professional. It transformed the look of my front entryway, giving it a modern, etched-glass appearance that looks much more expensive than it actually is. Excellent Heat & UV Control: The difference in temperature is noticeable. It does a great job of blocking the harsh midday sun and reducing glare without making the interior feel dark or cave-like. Total Privacy: It provides the perfect level of "frosted" coverage. I no longer have to worry about people seeing directly into the house, yet I still get to enjoy soft, diffused sunlight throughout the day.

Very effective, fairly easy to install. Lets light through but maintains privacy completely. Really good product.

I tried following the directions... BUT then I decided to do it my way. So, in case it helps- I spread out the roll on the table and taped it down so it could flatten and hopefully not roll up as soon as I untaped it. Then I took cheap terrible colored construction paper no one had used for years and taped it onto the strange- shaped windows (not a lot of straight lines on these) and after I had a very colorful window I took that stencil and put it on top of the unrolled window frost and used a pencil to trace on it. Then I cut it to size. I think it worked better that way. But of course, to each their own. After we had it on the window, following directions on cleaning the window first and all that, there were a few bubbles showing along edges, and a few spots of not sticking on the very edges. But really, not bad considering it was a roll so it curled a bit. Maybe I should have kept it taped to the table longer first. Even on spots where it didn't stick, it didn't curl all the way off, you can just tell the edges aren't stuck to the window all the way. Now, from the outside, at night you can tell lights are on, maybe see shadow of fan/light, but no details of in the house, the frost works. Another plus is not getting the glaring sun in the morning, it was pretty severe, now much better.

Based upon prior reviews, I obviously did not receive the same product. I applied the film as instructed and prior to me finding it on the floor the next day, did not see any indication that this film was providing privacy on my window. After applying it, I thought perhaps it would frost or provide some type of shield to prevent on lookers, but it did not and also did not adhere to the window. Application was easy, but that is the only positive thing I found. Perhaps the people who rated this product received something different, but I cannot recommend purchasing this product.

It was slightly difficult to apply and hardnto cut.. No matter how much you squeegee, water is still trapped underneath and is giving a splotchy look. I thought this might go away after a couple days, but the water underneath still has not dried and the spots where I tried to dry it underneath won't stick. One window is worse than the other. Edit: I took the film off and dried excess water. Cleaned the windows again. Don't know how long it will stick, but it took hours to do 3 windows. The third pic is the windows with excess water cleaned Second edit: it actually looks great. Found that you have to make sure it's not too wet and that there shouldn't be any droplets on the window prior to putting film on. Update: parts are not sticking and are coming down days later. Have to constantly wet it and it looks splotchy. I will see as the weeks come, how this will stay up. Edit: The splotches dried and the windows look nice again. I learned that the water will eventually dry. For the price it's nice. Once again, I will see if it will stay. Edit: a couple of weeks later and it is still up! I've had to re-wet certain parts to make them stick. But it looks good and is staying up for the most part. Would but again! Edit: one month in and they fall off and you have to re-spray them with water maybe once per week. Would still purchase

درجة اللون ممتازة تستر داخل البيت وما تمنع ضوء الشمس انه يدخل المكان بشكل جميل وغير مزعج

اعلان وصور غير الحقيقه الفلم كانه تجليد كتب بكل سهوله تقدر تعرف جسم ولون الشخص مو نفس الصور المعلنه لا انصح احد به

My Bedroom windows have clear brown glass so, This was a best decision I have made. I have followed all the instructions. It was easy. 1. Make a soapy water in a spray bottle. 2. A sharp cutter, Scissors ✂️ measuring tape, and a credit/Bank card type strong Card, tissue paper, Job will be 10 times easier if you have someone to help but one man also can do the job. Clean the glass/window perfectly. Then take the measurements and cut the size with some extra inch.then remove the adhesive sheet from the Film.now spray soapy water on window and the film then paste it on the glass.remove all the bubbles with help of Bank card, and from the edges extra sheet should be removed by the cutter. Since it will be wet so keep it like this for 8-10 hours. It will be set strongly by that time. The process is more like , as you get your car window glass tinted. Thanks, it's cost effective than Roller blind or curtain. Also, my windows looking really elegant.

Let 2 people do it, just easier. Looks stylish , let's through a lot of light, private , and best part, just peels off if you don't need it anymore. No mess. Follow the instructions on the roll.

الجودة جيدة والتغبيش مقبول