BAIONE Motorcycle Highway Engine Guards Protector Crash Bars Replacement for Kawasaki Vulcan S 650 VN650 EN650 2015 2016 2017 2018 2019 2020 2021 2022

Fit good. Bolts could have been a bit longer but they seem to work. Lock nut won't thread up to the threads so if it comes loose I'll be putting a bolt in about 1/8 inch longer. Original peg bolts are almost too short but work. It's not like they get stood on. Great value. good fit. Notice the pic showing that I've got the extended controls. It fit fine but the clutch pedal barely dragged the bar when made to so I put one washer under it. And you'll need a couple of washers for one of the peg bolts to make up the difference of the bar thickness in the front one. 4 nice quality 5/16 (8mm) washers for the pegs and one 3/8 (10 mm) washer for the forward control clutch and everything else works great. I looked closely at the orange bike here in the reviews as he added some very good pics. Hope mine help. A cheap price for bars that might save close to a grand for a dented fuel tank if the bike ever accidentally hits the ground.

These seem to be strong and well made. I bought the "warehouse deal" which was an even better deal but had to do a little bending to get everything in the right positions. They share the same bolt hole as the extended reach foot pegs so you'll need to hit the hardware store and get a couple of slightly longer bolts but they're pretty cheap. The instructions aren't very good but they point you in the right direction so take your time and be patient. Overall a great value, looks nice and they provide some added protection for your bike and your legs. I'd highly recommend this to anyone. I bought this for a 2017 Vulcan S and I don't believe they've changed anything throughout all models that would affect how this fits.

I had the same issue that others have noted. The middle mount on the right bar hits the rear brake reservoir. I tried to grind the mount to get it to clear but by the time it cleared the reservoir there was not enough metal left to hold the weight of the bike. Only way to fix it would have been to cut off the mount and re-weld it but then the hole would not line up.Update: I returned this and bought the brand name bars. I found they both have the same issue with hitting the rear brake reservoir. I ended up muscling the thing into place. Nothing in either set of instructions said the bars won't fit unless you force them.

Single piece of paper installation instructions are terrible. Bars needed a minor adjusting to line up the holes. Installing by myself took a little time but was doable and once on The bars where on they look good and seem sturdy. The coating on them lightened up over time but seems durable and haven't had any issues getting wet.

It is what it is, a low priced imported version at less than half the cost. The finish was excellent, the welds were smooth & even. The fit wasn’t perfect but I expected as much. One little tweak on the vice & it went on, no problem. Here’s a tip; anytime you install anything with multiple bolts, just get them all started then add thread lock one at a time, then tighten with a wrench once they’re all hand tight. Also, read the description. It says no instructions included. You really don’t need them.

Before you start installing the bars, here are some tips I learned the hard way:- Read the reviews first: They provide a lot of information regarding the mounting of the bars.- Watch YouTube videos: Since there are no instructions provided, watch as many YouTube videos as you can to understand the installation process. It took me 4 hours to figure out how it works.- Ensure you have all tools.- Keep bolts loose during assembly: Do not tighten the bolts until you have assembled all the parts; otherwise, you won't be able to attach the rod.- Get help to align the bars: You'll need someone's help to align the bars with the holes. It's difficult to manage alone.- You'll need someone with long and thin fingers (in my case, I asked my kid) to screw the nuts from the inside.Overall, the product is good and hopefully does its job. I'm happy with the result! Minus 1 star because of the lack of instructions.

Really, these are the instructions and basically the parts you buy might not even work to complete. Do better amazon this is pathetic

I laid my bike down while learning to ride and these bad boys did their job. Not a scratch on my bike. Easy to install for the most part a little confusing but nothing we can’t figure out.