Picquic 88562 Carded Combo Pack with Sixpac Plus, Stubby and Teeny Turner Drivers, Assorted, 3-Piece

My oh my, where do I begin?12 years ago, my mom gave me a bright yellow Teeny Turner as a present. We didn't understand each other very well at the time, and rarely saw eye to eye, but she had seen that my toys seemed to sit idle, gathering dust - dust from either building computers or tearing them apart.So she thought about this and decided to give me useful things instead of """fun""" (according to toy comlanies) things.She got me a Teeny Turner. I can say without hesitation that it is one of my most cherished possessions.There is no tool that I own that has been touched, handled, used or abused more than that tiny yellow driver. It's not for want of competition, or out of sentimentality.My dad is a carpenter, and he's been collecting tools for decades. He has hundreds of screwdrivers, no exaggeration. They're all available to me, from cheapo Harbor freight junk to very high-end insulated electrician's drivers to extremely precise specialty electronics bits. Tons of choices.When I first got the teeny turner, I kind of scoffed at it. I had bias against drivers with replaceable tips - usually they were chinsy, rattly junk with soft steel tips that would inevitably vanish to wherever socks go. So I threw it into a desk drawer and continued borrowing my dad's bits.One day I needed a really short driver for a torx screw in a tight spot, so I dug the teeny Turner out of that drawer. It never went back.But why? Why, out of the hundreds of screwdrivers I can use, do I keep coming back to the stubby yellow one?Let me count the ways...1) Size. The reason I first needed it, still a major benefit. It fits where other drivers don't, and without the complications introduced by angled drivers or ratchets.2) Grip. It feels good in the hand. Really good. No matter how tight the space or how awkward the angle, I always feel like I can get a good grip on the knubbly plastic handle.3) Blades. The set of blades that come with the driver are darn good steel. The Phillips heads *do not* get dull. They stay sharp and bite hard. Sometimes I'll use a different driver for whatever reason and a screw's phillips head ends up stripped. Happens to the best of us, and it can totally derail a project. 9 times out of 10, I can get the teeny turner, get a real slow, careful bite, and pull the screw. Number of stripped screws I haven't had to drill out or reverese-thread or tap? Many. Many many. This is especially important for electronics repair, where there's no replacement available. Just a few weeks ago, i was opening up a laptop to clean it out and fix a loose connection to one of the USB ports. One of the main phillips case screws was pretty much carved out. Enter TT. Bites the screw, pulls it first try. Screws it back in without a problem. wont have a replacement screw at all. In my time with the teeny turner, i have bent 1 blade: the largest flathead, and I was (ab)using it as a prybar. It's still perfectly serviceable, just a little wavy.Okay, the based are loaded. Teeny turner steps up to the plate. The audience is hushed - will it be a grand slam?The pitch...4) Blade Storage. This is the home run that brings it all together. Remember how I said replaceable bit drivers are usually rattly, with unintuitive storage that requires taking apart the driver? Teeny Turner does away with that. The slots around the outside of the handle are a precise, snug fit for the interchangeable blades. At any time, there is one blade in use, attached (firmly) to the magnetized center shaft. The other 6 bits sit in the slots. The tip of each bit is visible from the outside. To change the active bit, you pull it, push it into the slot of the bit you desire, then attach the now-exposed desired not to the shaft.I know, it's simple, whatever, big whoop.I think it's absolutely ingenious. If you're using the Teeny Turner normally, there is never, ever a time when two bits are out of their slots simultaneously, because you must deposit a bit to withdraw a bit. You cannot lose them, because the tool FORCES you to return them to a safe place. Brilliant design.Okay, so I love the teeny Turner. I was browsing around aimlessly when I stumbled across this set. I almost missed it, since the brand name doesn't ring a bell, but a glance at the image showed my favorite driver - the teeny Turner- along with TWO big siblings. And cheap. So I bought em.They're perfect. Honestly, the Teeny Turner alone has been perfect. Its only limitation has been really big screws - the bits just arent large enough. Now that I've got the whole family, that's no issue.Lolok, everybody needs a couple screwdrivers. I don't care if youre the least mechanical person I the planet - you should have, at the very least, a good, hefty phillips, a good, hefty flathead, and a more precise version of each.Whether you buy them individually or as a set, they're either going to cost a pretty penny or be pretty junky.Do yourself a favor and pick up this set. It's the best I've ever had, and while I firmly believe these tools will outlive me, if I do manage to lose or break one, I'll come back and buy another.

These are high quality tools and I own several. Easy to use, feels great in the hand, driver bits are easy to swap and store safely in the handle.

This is BY FAR my favorite type of "multi-in-one" driver for the following reasons:- The shank is narrow and short, where the bits are long and narrow.- The bits are push-through, so you never have to put any little parts down to swap bits.- The bits are GOOD.- The bits can be purchased on the manufacturer site, and reseller sites.- The price is extremely low.- The tool is made in Canada, a nice change from China or Taiwan.- All the driver handles have an external hex on the shank for putting a wrench on.I bought this 3 pack and loved it so much that I went back and purchased their Torx driver, and both Hex drivers (SAE & metric).The only change I would make is for the handle shank to be an inch shorter, and for the bits to be an inch longer. But now I'm just nitpicking. It's already better than all the competitors in this area. But why not make it just a little bit better.

Great screwdrivers. I had a multique (the mid-sized red one in the package shown) that I would pack in my carry-on laptop bag when traveling. Since it is under 7" when you double up the bits in the storage area TSA happily lets it pass. Its compact size comes in very handy and it has lasted a good 8 years.The Mexican version of the TSA, however, required me to gift it to them for display in their public shaming .. ehm.. "Don't bring things like this" case. Please wave to it for me if you happen to be in the Vera Cruz airport. Be sure to leave yours at home if you're flying to Mexico - I will with my new set. :)

I love the longer bit, which gives better access to screw heads in tight places. This is the only type I will buy in the future.

I'm pretty happy with this purchase. This is a good deal for the price. The magnet that holds the bits is very strong and bits never come loose in the handle. The two smaller screwdriver's bit's are really for smaller applications, good for electronics and the like. I carry the larger screwdriver is my service bag as my main screwdriver.My only complaint is the screwdriver is not very ergonomic, the handle is pretty big. Not much you can do about it and it works fine.

Thanks

All the pictures show an assorted color pack. Mine were all red-handled. I would have been fine with just about any other color. I ordered the Picquic hex driver sets which only come in red and blue so the reds will look the same in the tool bag. Not the end of the world but it sucks that you don’t get what is indicated by the pictures in the listing. It says assorted, but I figured that meant each of the three were different colors. Just feel like the listing is a bit misleading. Happy with the quality of the screwdrivers, just disappointed that I didn’t get what I thought I ordered.

Brand new item was selected and paid for.The item received was not brand new, The " SIXPAC Plus " and the " Multique " was cut out of the packaging and the packaging was taped back together.The bits also appear to have started rusting.

Good product

Used in conjunction with a toolbox drill driver - bits fit typical screws. Solid product and in my opinion one of the best configurations for ease of use. Easily fits in to a pocket for convenience and practicality (if thats a word). Pity spare bit sets are so expensive and difficult to find. Would like to have a set of torx, hex and pozi - would be a perfect combination. Just feels so good and a quality product. Have bought 2 different combination sets.