APEVIA X-QPACK3-GN Micro ATX Cube Gaming/HTPC Case, Supports Video Card up to 320mm/ATX PS, 2xGreen Windows, USB3.0/USB2.0/HD Audio Ports, 1 x 140mm Green LED fan, Flip Open Design, Dust Filter–Green

Excellent little cube case for one of my kid's PC builds. Easy to work inside of, and plenty of room.I built it with the following components:AsRock H87M Pro4 mainboard, 2x4GB DDR3 1600 G.Skill, Pentium G3258A, Cryorig H7 (plenty of clearance with or without top exhaust fan!), 640GB HDD, DVD drive, a EVGA GTX660OC, and an EVGA 500W KR PSU to power it all. Fit great.I also installed a Cooler Master 120MM fan at the rear exhaust, and have both fans on a quiet speed. The system keeps cool and quiet, is super stable and the case looks neat. My son loves this PC and uses it frequently, shows it off to visitors. Having the case hinged also helps with installing components and getting into hard-to-reach places. Just keep in mind with cable management if you want to be able to use the hinge feature or not.The minor annoyance of the extra screws to unlock the hinged part are actually a good idea, but for someone like myself that builds 100s of systems that's wasted time for a feature I actually like to use. But in the same breath it is also a safety and point of strength to keep everything together.Overall I would highly recommend this case for a nice budget mATX/mITX build. The case is clean in appearance, looks modern without being too over-the-top. It is super easy to work on and in, and has all the decent standard features at a very appealing price point. I've used Apevia for years...back when they were named Aspire...in-fact one of the older mid tower cases from over 10 years ago is still in service today.This is one of my favorite cases from them and I will continue to be using them for builds for some time to come.

Cant say enough good things other than I LOVE ITI have been building and modifying personal computers since day one.So I upgrade my son and myself every 2-3 years and also my network of buddies .This case has Looks,well built and relatively easy access to chambers for building and installing motherboard and fans.I used the smart RGB 700 watts regular power supply the MSI Pro Series Intel B250 micro motherboard (9x9)And a Cooler Master MasterLiquid Maker 92 witch is tall but this case is modular and you can lift the top like a car hood for ease access .No problems I must say I am an expert so super easy for me.But even a first time builder should figure this case out and have a full build under an hour.Fan is quiet and RGB COLOR DEPENDS ON MODEL.i slid in a small regular ATX motherboard (12x12) and I could make a build, but not for the newbies.windows have blue tint that with extra RGB light kits will look awesome.I installed the GTX 1070 gray Founders Edition no problem size wise.I don't think the 3 fan GPU'S will fit here.when I finish it I will upload pictures ,I am waiting on some custom fan grills to finalze itIt is a very nice cube case,love the round legs.Note" If you a heavy gamer Over clocker this might not be the best choice due to Airflow design .but for savvy experienced builders no problem because the side panels can be modified.I recommend this for CPU's 90-100 watts like the 6700k,7700k or the new sheriff in town the I5 8600kAs for the USB front ports and Audio they worked OK from first boot I loaded Windows 10 from a USB DVD external drive with no problems.I was updating MS dll's from a USB WIFI connected in front USB 3.So I had no problems with mine.Did I mention I bought a pair,1 black 1 white.have fun

This is one of my first Reviews on something but i was just very happy with the case, i wanted to help people who might be looking at it but wasn't sure like i was before buying this case.I was using this case in a build for a niece who needed a simple computer for some lighter gaming and basic internet browsing. This case has a nice amount of room inside despite how small it is i was very happy with how i was able to clean up the wires in this case it has tie off points around some key areas that you would need them not many but a nice touch for a around a 50$ case, seen higher costing cases with out this feature....It was very easy to break it down front you can pull it off to get to that front 140mm fan, (for the front make sure you if your using the front slots to make sure it's flush with the front i had to take it back off when i saw i had the CD drive too far back.) The top prys off as well after you take out 4 screws watch your front panel wires though... it's part of it, would like to see that addressed if they make another model of this case, front panel wires should stay with the case not parts that you need to take off to get to things on the computer. once you take off those screws you can pull the whole top of the case towards the front like a hatch so it's easier to work in the case.Was very happy to see the 2 HDD cages on the Bottom with SSD ready holes, as well as 1 SSD Cage under the 5 and a quarter drive, the cages felt very sturdy also very nice to see.The side window panels are very easy to slide in and out of place, have worked in cases costing alot more then this where they would be a pain in the ass to slide back into place. The windows on the side panels are not the best but for 50$ i expected them to be cheaper all the other features in the case are much more important then a window. One came with a scratch in the bottom left but no big deal really.i saw the Mobo tray has a cutout but in order to fully get to it easy the power supply would have to be out nice to see though in case you need to get to the under side and can still do it with the PSU installed still.Pros:-SSD ready-5.25 inch drive (for me at least some might see this as a con but i like em for fan controllers or if i want a CD/Bluray drive)-USB 3.0 connector-Nice amount of room and areas to tuck cables away-Cable tie loopsCons:-Not very good dust filters, having dust pull out dust filters would have made this a 4.5 star case for me, (The PSU has one but it's very cheap see picture)-Side windows are not the best, but for this price point they are fine.-major one for me, the PCI back slots can't be put back in.... once it's off it's off. I know it saves money but cases need to not do this anymore it's garbage (and this would have made it a 5 star case for me if the dust filters would also be addressed)-front panel wires are not blacked out, again another thing cases need to stop doing it can't cost that much to have black wires, if the case had no windows fine i would live with it, but this has 2 windows so people generally will care what the inside looks like. (But i will point out they had them zip-tied so they wouldn't be a mess for the build)-front panel wires are attached to the top panel, when you need to get to that top fan and you pull off the top panel those damn wires come with it kind of a pain if i need to get back in the top but don't want to detach the wires from the Mobo.Overall very happy with the case, i would use it in another build should i need a form factor this small again was very fun to build in.Parts in the build :http://www.amazon.com/gp/product/B0033Z2BAQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00http://www.amazon.com/gp/product/B013J7Q338?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00http://www.amazon.com/gp/product/B00H7Z7YMI?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00http://www.amazon.com/gp/product/B00EON40CS?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00http://www.amazon.com/gp/product/B00F6S0XGW?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00http://www.amazon.com/gp/product/B00F6S10PK?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00http://www.amazon.com/gp/product/B00NP6D9PY?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00http://www.amazon.com/ASUS-Micro-DDR3-Motherboards-A68HM-K/dp/B00R0I8SQ8/ref=sr_1_1?ie=UTF8&qid=1458027407&sr=8-1&keywords=asus+a68hm-khttp://www.amazon.com/G-SKILL-Channel-2133MHz-Desktop-F3-17000CL11D-8GBSR/dp/B004URV6Z2/ref=sr_1_2?ie=UTF8&qid=1458027461&sr=8-2&keywords=g.skill+sniper+series+8gb