ChargerCityUniversal Motorcycle/Bike Mount with Water Resistant Case for 6" & 5" inch GPS Garmin Drive DriveSmart 6 60 61 62 63 65 66 67 68 5 55 56 57 LM LMT

Falling into the pri¢e despair pit of Quadlocks, ram mounts, beeline motos and other phone/sat nav motorcycle accessories I stumbled across this product. Something that can only be described as an over engineered ziploc bag. But just like the sandwich seals your mom or dad relied on, this is just about the best method for protection and storage on a set of bars.Intallation is for idiots. There's nothing special you need to add to the phone itself. Included is multiple foam pads to accommodate the THICCC-ness. Bar mount will easily clamp both 7/8 or 1 1/8 as shown here. Zipper is durable, and the inlet for charger/headphone jack adequately holds the cable in place. I have owned multiple of these holders for multiple different bikes. Some more wind protected than others. Ridden at 75+ MPH & I am writing this review with the same phone that bought them with. Enough said there.Once it's inside screen interaction is largely impossible. Do you have to be told why that doesn't matter? The case will eventually gain condensation but is manageable with a simple wipe down and drying. To my knowledge it has never flooded out on me when riding in the rain.Doubtless there are nicer, cleaner, smaller and better looking ways to keep your telecommunication device at a glance on whatever you ride. Butt. This is the dad's new balance white sneakers of them all. The belt clip holster. The tube socks. We point and laugh now yet someday we find ourselves slowly slipping into the cheapest easiest product to a problem that doesn't need any more solving. 5 out of 5. ⭐⭐⭐⭐⭐ God bless this (probably) Chinese company making more distracted Americans.

I have this mounted on my motorcycle for long trips. The mount is easy to use and stays in place while rolling down the road. Clear plastic gives great visibility to the screen. Works great!!

This is a great products because it serves as several accessories in one! ( first off, if you remove the place on the back, you can use a standard Garmin socket mount on it! also the water resistant/ proof case and zipper have tons of room! ( 5" GPS will fit very very snuggly and work extremely well! ) but if you have something smaller it works well too, just use the proved foam shims and you can put a small phone in their if need be also

It's decently made, and holds my GPS securely.If you don't want to invest ridiculous money on dedicated mounts and GPS units, this is a great way to get the job done. I just grab my GPS from my truck and stick inside of this holder on my motorcycle and off I go.I also tried my Samsung Note 20, and it was only 'okay', but my Garmin GPS fits nicely.

I ordered this for an upcoming trip on my motorcycle to hold our older GPS. It fits over my 1" handlebar very snugly using the rubber sleeves that came with it, so no problem with it sliding around in use. What surprised me was how wide the case is! It's advertised as holding up to a 5" phone or gps unit, but it will actually hold up to a 6" one! The entire width is 7", and the plastic window is 5 3/4". My GPS unit is 4 3/4", but using the foam inserts that come with the case, it's easy to make my GPS unit snug enough as to not move around during use. The case is pretty easily removable from the mounting ring, which you can make as snug as you need to after rotating the case to whatever direction you want, and then tightening the plastic retaining nut. I haven't tried it yet in bright sunlight, but I assume I'll live with whatever glare there may be by simply shading it with my hand whenever I need to see it better.

In many respects, this mount is exactly what I was looking for. A stable, waterproof unit to protect my new Garmin GPS when riding my motorcycle. The big issue I have is the plastic face. It flexes/warps and it's glossy. This means that when you are riding on a sunny day, you cannot see the GPS screen very well or not at all because of the glare on the plastic screen. I built a box (about 4" deep) to to place the mount and GPS in so the sun doesn't reflect so much off the mount's plastic screen. It helped a little, but the warpy plastic screen still picks up glare. This mount works best on cloudy days and at night, but is a big-time loser when the sun is out..

Fits my Garmin GPS very well and the touch screen works through the clear covering. Haven’t mounted it yet it is still to cold for a bike ride.

Don't be fooled by the odd angled photo. This thing is most DEFINITELY NOT for the models using the same footprint as the Nuvi 265W. I might be able to use it, but waiting on other parts from Amazon to see if I can make it work.