DEVAISE Adjustable Height Standing Desk, 47 inch Sit to Stand Up Desk Workstaion with Crank Handle for Office Home, White

First, I love this desk. It was very easy to put together (all by myself - female/57yrs). There were a couple of extra screws in the bag of hardware that came with the desk. Once assembled, the front crank handle is easy to use. I personally prefer to leave the desk at standing height most of the time though.Prior to receiving the desk, I was a little concerned that the desk would not be sturdy enough based on some of the reviews that I read. However, I find that the desk is plenty sturdy enough for my purposes, even at the standing height.During assembly, I found that there was an insert nut missing. This is a part that should have been embedded into the underside of the desktop. It’s not a part that the buyer would normally install during assembly or find in the bag of assembly hardware. Someone at the factory must have missed its absence. Because I needed the desk asap, I went ahead and assembled the desk without the part. The desk was plenty stable and very usable. I contacted the seller about the missing part and they were very quick to respond and quickly shipped the correct part right out to me. Now, all I need to do is have a spare moment to flip the desk over and install the missing part.I also added a drawer to the underside of the desktop surface. I purchased it on amazon (NYCCO Underdesk Drawer 23 Inch). The drawer is deep enough for pens, pencils, a pad or 2 of paper, and a stapler resting on its side. It’s a nice way to keep some of the clutter off of the desktop. If you are considering doing the same but want more drawer depth, someone posted a review on the drawer’s amazon page with instructions on how they did it. When I assembled the desk along with the drawer, I positioned the legs more toward the back of the desk so that the drawer would fit (which it does perfectly). And still, the desk is plenty stable.All in all, I am very happy with this desk and the seller is easy to work with and very eager to please.

This is a good desk for a cheap height adjustable. Very big, it fits a 43” TV. It holds up to 100 lbs. it only takes around 30 minutes to build, very easy to put together. Once weight is in the desk it does take some force to crank it up. It can stop at any height but I find it is more stable when the crank handle is facing down like in my picture. Otherwise, say if you stop it while the handle is pointing to the left, or upwards, the table likes to drop down until the handle is facing downwards. But it doesn’t feel like it’s about to unwind and drop down by itself, it’s able to hold its position lock at any height. Worth the money, good quality. Electric ones are very expensive and this is very sturdy.

The desk was easy to build if you follow the instructions carefully. Don't tighten bolts until you have each set inserted and loosely screwed in. It mentions this in the manual repeatedly. I had no problems building it without anyone's help.The actual desk (tabletop, legs, supports, and assembly hardware) are very sturdy. The beams that link the legs together, which then bolt into the table top directly and using two cross members on each side, come together with a lot of bolts. It feels solid once together.The "axle" and handle that adjust the desk height is kind of cheap. The handle itself feels flimsy. The gearbox (I think it's a gearbox of some kind) assembly on each leg is linked together by a long hexagonal rod that inserts when you assemble. The handle is attached to a hexagonal rod that inserts, altogether attached by a cheap plastic mount and two screws.Overall, unlike the rest of the table, the adjustment/drive parts are kind of cheap. That said, it does work fine. For all I know it may surprise me and last years. I won't be adjusting often. I mostly wanted a table that can be raised/lowered to match the height of my office chair. I might raise it to standing desk height sometimes, but probably not often. Something on my mind that I considered when building the table was that the hexagonal rods are not unlike the hex ends of hex wrenches. If the linkages were to fail, it's probably possible to adjust the height of each side individually with hex wrenches.Lastly, the packaging is pretty poor as mentioned in other reviews. Actually, not the worst I have seen. The styrofoam inside probably looks pretty protective when it leaves their warehouse. There isn't much (short of injected two-part foam) that is as protective against impacts than blocks of styrofoam. As we all know, a package that is both large and decently heavy increases the chance of rough handling by shipping companies. A package the size that this table comes in inevitably will be rolled, tumbled, dropped, scooted, and generally banged up in transit. Could it be better? Yeah, and needs more tape. They tried, and my table arrived intact despite a battered box. Some customers may not be so lucky.Considering the price, I think the table is a pretty good value. There's probably no perfect table at this price range. My criticisms are minor and I am happy with the purchase.

So when I purchased this desk it was going to be around 2 weeks to be delivered which wasn't a huge deal for me, I liked the price and the reviews were good. Then it just showed up at my door 2 days later. So I wouldn't get discouraged by a delayed delivery time. The desk is super easy to assemble and is all metal except for the desk top. There are threaded rivenuts so you do not have to screw into the "wood/composite" material; there are metal threaded receivers. Taking my time it took me maybe 20 mins to assemble.The crank is smooth and the desk doesn't seem to wobble at all. The max height of the desk is impressive so it works amazingly as a standing desk.

I ordered since I'll start work from home new job, it was easy and fast to install, requires two people to assemble since is heavy , at least for me . It looks very good and strong, good quality, easyto adjust it to your needs (sit to stand up)I can't believe that I get this perfect work station at very low price!! I highly recommend this desk.

Great desk. Great price.I sort of giggle with excitement every time I move it up or down. It's the perfect height for what I'm wearing now, and heels I'll wear tomorrow.Nite: the table shakes (rattles) a little when going up, and a lot more going down.No problem, unless your on a zoom call at the time. :)

Mega

I have a sore back and the Physio recommended a standing desk as I work from home and am at a computer all day, this does exactly what I need. Very easy to assemble and it looks great. I also got the anti fatigue mat to go with it and thus has made such a difference, no tired legs or feet.

Does what it says on the tin. Surprisingly sturdy and looks great!

Very nice table with height adjustment feature, especially for tall people. It looks beautiful in our office room at home. It doesn’t look bulky at all so, I love it. Packing was a really good, received quickly and easy to assemble.

assembled easily - quite sturdy, height mechanism fine