CRAFTSMAN Benchtop Jointer, Up to 22,000 cuts per Minute, 10 Amp, Corded (CMEW020)

Some assembly out of the box. You'll want to make sure you have a good machinist square to get the fence dialed in. Outfeed and infeed are pretty short, but were set perfectly out of the box. You may need to make accommodations if you want to joint anything longer than 4-5 feet. If you don't have dust collection you'll need to stay on top of dust chute accumulation, clearing it every couple of boards. Blade guard WILL contact the knifes during operation with even slight pressure on the top of it, so definitely avoid that. All that being said, I've been using mine for a few months now, and, after some reasonable accomodations and minor adjustments, it functions perfectly well. Worth the price.

Es una cepilladora o garlopa muy buena, en Argentina funciona con un transformador 120 a 220v. En cuanto a la durabilidad espero dure mucho tiempo

The replacement is good, and what I mean by that is I ordered one of these and took it out of the box. Then got it all calibrated and setup, which took around an hour as the instruction manual states. Ran a test board through it and on the 4th pass the motor shut down and would not turn on. Got a replacement issued which arrived quickly, so compliments to Amazon’s part, and set it up and now it’s working good. Does exactly what it’s supposed to and does it well. I’m not too concerned about the first one as it comes with a manufacturer warranty, but it was an inconvenience.

I work on a lot of smaller projects (cutting boards, serving tray,s etc.) and this jointer has changed my life. It allows me to use wood I thought I would never use. I can make designs I never dreamed of before. It's easy to use. The set-up was a breeze. They say it takes an hour to set up; it's more like 15 minutes. Squaring it up was not a problem. It just does a great job. I'm sorry I waited so long to get one. If you have large projects this might not be for you, but for smaller jobs (up to six inches wide) it can't be beat. It's not heavy so can be moved around with ease.

Very well made planner good finish and paint on machine. Ran about 400 feet of board not a problem. Chips do build up if you don’t use vacuum attachment a wipe of small stick clears chamber.

Muy buen producto. Para trabajos livianos es perfecto, buen corte, precisión y poco ruido.

I have had my jointer since February. I have used it on a limited basis. It needed a lot of adjustments, which was fine. However, the motor did not last long at all. Tonight was my fifth or sixth time using it. I made a couple of passes on hardwood turned it off to check the stock and went to turn it on again to take a couple of more passes and the machine won't turn back on. No motor noise of any kind. Of course, I am passed my return window. I did check my outlets and plugs an they are all working. Looked for a reset button to see if that might be an issue, but don't seem to find one. Quite possible it might be the switch. Will try and take a look however with the limited times I have used it, I was hoping for a challenge free life with the product.

This is my first jointer, so I don't have much to compare it to. The build quality is great, doesn't feel cheap. The dust collection is excellent! I just use a shop vac / cyclone combo for dust collection, and I needed to get an adapter to make it fit a shop vac hose, but I couldn't even see any dust in the air while using it. As a test, I jointed the face of a badly cupped 2x6. It didn't seem to have any problem with powering through all 6 inches of width, and after several passes it was perfectly flat and smooth. I am happy with the purchase!

as long as you know the product specifications since it was not mentioned it is 110 V not UAE version 240 V and you have the converter . I gave the 5 star for 1/ money value 2/ fast delivery 3/ condition exactly as described so happy with the purchase

Excellent quality. Works as it should.

Lo compré a un super precio, ya lo estoy usando; el único inconveniente (de antemano previsible) consiste en la fragilidad de sus planchas de trabajo, dado que son de aluminio y tienen la fragilidad propia de dicho material, por lo que se rayaron desde el primer uso con lo áspero de la madera. Sin embargo todas las cantadoras tienen planchas de aluminio. Por lo que las cubriré con sendas láminas de 1mm. De acero inoxidable fijado a las planchas y asunto arreglado. Por lo demás estoy muy satisfecho con la adquisición me ahorra innumerables horas de trabajo y además con excelentes resultados. La máquina es de velocidad variable, bastante silenciosa y no vibra ni se esfuerza al cepillar. SÍ LA RECOMIENDO.

Gostei muito, praticidade no transporte,no cliente para trabalhar a desempenadeira é bem útil facilita bem as dificuldades que tinha para o trabalho fora da marcenaria.! 👍🏻

Bought it to ensure clean edges on the lumber I get from my mill. The first runs through were alright but could have been better so I levelled and adjusted the blade and deck alignment to get better quality runs from it and that helped immensely. The shavings tend to collect in the chute if you do not have a dust collection system so that is one watch out for as they start to blow back and around and impact the quality of the cutting face.