PowerZone 380047 1700 LB Hydraulic Motorcycle/ATV Jack

This jack is great. It lifts my 800+ Yamaha Roadstar Silverado easily, has a nice slow foot control to lower the bike easily to the ground, and what I like best is that it is very stable. No problems whatsoever and assembly took little more than five minutes.I spent a lot of time reading reviews of most of the major brands out there, I'm not sure why some claim the jack isn't stable but I have to assume it was an assembly problem or a defective unit. Highly recommend this jack.

I read all the reviews on here and still decided to give this a go. Boy, am I glad I did. I have a 2016 heritage and this thing is perfect. The fit underneath was also perfect. It did not come damaged or scratched, the paint on it was flawless as was the box it came in. All the parts were there. Assembly was super easy if you have the mechanical inclination of a 5 yer old. I would highly recommend this product for anyone with a Harley or any other bike/ATV. Well made and solid product.

Easy to assemble and works ok. I think the lift release could be slower and the jack locking bar could be spring loaded but all in all a very good jack. I will probably make a spring mount so the lock will auto engage; the manual act of setting it should have been Murphy proofed. That's why I gave it a 4 star. Other than that it works perfect for my Suzuki 1500 Intruder and it's rock solid. And, for those who complain about the assembly instructions?? all I got to say is if you can't assemble this jack with ease or even without looking at the instructions, like I did, you probably shouldn't be jacking anything up to work on. This thing is so easy to assemble it really isn't a mention.

This thing is amazing. I have never had a lift and got it for my Harley Road King. It fits underneath perfectly and lifts very easily. You need to be aware of centering the lift on the bike but that is just common sense. It is strong and easy to use. My Harley weighs 830 lb. and lifts it with ease and keeps it up. I have even moved the lift while the bike was in the air. The wheels do accommodate movement but I am a little nervous to do that alone.Great for the price.

The rear swivel wheels were a poor design. So I preferred to improve them by cutting 1/16 off the bushing to better mate the parts together. The gouges in the washers are actually the race for the ball bearings and not a defect. Since it is an open style bearing I used dry graphite for a lubricant instead of grease as it will act as glue for sand or other particles. Gave it a 4.95 star rating since other than cheap wheels it is well made and works for me. .03c lee

First off this jack does appear to be well built and strong. If it actually fit my motorcycle I would probably keep it.The problems I had with this jack is:1. The directions are not very clear as I had to read each step and then look at the picture to determine what and where the step was reffering to.2. The saddles (pads/arms that go under the motorcycle) are to short for my bike. They are 11" long and my motorcycles frame width is 12". Amazon and/or the company NEEDS to put the length of the pads/arms in the product description as this is VERY important information for the prospective buyer.3. The swivle wheels do swivle but not very easily. My guess is there is just not enough weight on those wheels to make them function properly. I think they MAY work if there is more weight on them like if my motorcycle is actually up and on the jack but I was not able to test this as the jack does not fit my bike.4. The minimum height of this jack is 4 1/2". The ground clearance (height of my motorcycles frame from the ground) with my bike on the kick stand is 4". Not a big problem (or I thought it wasn't) as I held my bike upright with one hand and tried to maneuver the jack under with my other hand. This did not work. I was able to get the jack most of the way under my motorcycle, unfortunatelly there still was not quite enough room. All I was able to do is scratch up my garage floor trying to get this jack under my motorcycle. When I finally got the jack out from under my motorcycle, one of the rubber pads was pulled off as there was just not enough room for it to move around. I think if the swivle wheels would actually swivle like they are supposed to I would have been able to manuever the jack under my bike a little easier.The reason I gave three (3) stars is because this jack does appear to be built strong and it looks like it would be sturdy with an ATV/motorcycle on it.I STRONGLY ADVISE anyone that is interested in buying this jack to measure your ATV/Motorcycles frame for it's width and ground clearance so you do not have to return it like I have to.

I received my PowerZone lift this afternoon (5 Feb 2014). It is a superb product! As in other reviews, the directions are not that great but you do not need them as there are only three items to assemble; the bottle jack, the bottle jack connection to the main beam, and the stop bar. All you need is a small adjustable (crescent) wrench and a pair of pliers/needle nose pliers for the cotter pins (or, as the directions say, "cotton" pin. LOL!).The lift pads are right at 4-1/4" in height from the floor, which is great as my '07 Sportster Custom's frame sits at 5". The site description states 4-1/2" as it probably adds in the steel knobs that are at the ends of the lift arms. Compared to many other jacks (including Black Widow, OTC, etc.), it gets down to a great level that makes it easy to fit under your bike or ATV.I am very happy with the product and have nothing negative to say about it (unless you want to consider that it is made in China). Nonetheless, it is well-constructed. It is distributed in the USA from a company in Chino, CA.If you have any other questions about this product, please use Amazon's "Ask a Question" on the product page and I will reply as soon as possible. Enjoy, and be safe! Straussjoe