VM22-133 Carburetor 22mm Replacement for Mikuni Round Slide VM Series Replaces 1002-0048

Bike runs great with this.

22mm mikuni style carb good quality. Mikuni stamp, Made in Japan stamp. Seems to use some authetic parts. I've ordered 2, NO COMPLAINTS.

looks to be a very nicely made carb with nice adustment screws, etc. now the bolt centers are correct for SSR 125 but the intake has the carb offset top or bottom, this is centered and when you bolt it up the sealing O-ring hangs out and wont work. Sorry would not work for me as loved to have tried it.

I got it in 2 days so shipping was good, when I mounted it I thought it could be air leaks because the carb was untunable. I took it off and saw it was perfectly aligned and I put it back on but only ran on choke and for me to get it to run on normal I had to rev the piss out of it on choke then hit the lever. No matter if I adjusted the needle or jets it would not run or anything. DO NOT BUY

Works

Pretty nice quality but it uses strange proprietary main jets. I asked what type they are so I can order a variety of sizes but got no response, so I will likely return both carbs I ordered. If I can't tune it I may as well leave it off my bike!

Real licensed mikuni carb. Has Mikuni logo on carb. Resembles the genuine authentic Mikuni carb. My opinion is that this is a racing carb. It will make your motorcycle go super fast.. almost double or triple the acceleration and torque then the knockoff mikuni carb... But getting your motorcycle to idle will be almost impossible to do.... Plus this will make your engine overheat to an extreme point it will get so hot that the catalytic converter if you have one will turn molten red. My advice is just buy the knock-off Mikuni works better especially for an average motorcycle or a Chinese motorcycle. The Nibbi is even better... but on top of everything I said just know the more you adjust these carburetors the more you're going to ruin it so try to do the most minimal adjustments to it this one was built more heavy duty so you can adjust it more then other carburetors but I can't figure out why this makes motorcycles overheat and I put it into 2 different engines and had the same results

First I have ordered 5 other "mikuni" carbs off amazon. All junk and the same price as this one. It appears to be a ligit mikuni. Stamped mikuni corp and made in japan. Best carb I have gotten by a large margin.

Couldn't believe that its a direcr replacement and for cheap. I buggered around with that original carb just couldnt get it to work proper. Looked up this carb, ordered it, slapped it on and whamo...runs awesome. Comparing the two, probably parts missing from original. The replacement is great Now my wife can ride the bike just like she rides me

The weight of this carb is unreal compared to all the other Chinese remake carbs out thier. I didn't weight it but I have cheap pz20 & pz22 and this vm22 carb weights like 2 to 2.5 times heavier. This remake vm22 is more like the real one with the choke is on the right side, the slide is truly round not oval and the bolt pattern is centered instead of off centered and with a dremal or die grinder the holes can be turned into slots like the real vm22 and makes installing the carb easily with long enough bolts. I have not used the carb yet since it's for a new setup but i plan on sanding down and making a velocity stack out of JB weld.

Minibike