EVIL ENERGY 2.0'' Exhaust Clamp, Lap Joint Band Clamp Stainless Steel for Pipes, Mufflers, Catalytic Converters (2PCS, 2.0 inch)

Product is well built and is best option when trying to clamp instead of weld.

While this is shaped and designed for round pipes, I decided to give it a shot to see if I could help seal a lap joint on my exhaust which has an Oval section (2.5"x4"). Worked like a charm! No leaks of air or condensation. On the attached image it is the clamp at the left.

Worked as it should, stays tight and no leaks. Make sure you are free of any burrs so clamps lay flat to mating surface/ circumference of pipe. Holding up to heat and weather very well.

Works as it should. To hold your exhaust together without welding. Good value. Needed some place to separate the exhaust the should seal but they don’t really but not a big deal. Let’s see how long that’ll last

1st order got sent without the hardware... seller made it right & sent a whole new set. Grade A parts & customer service!

Works as described. Very easy to install. Made out of durable stainless steel so it should last a long time.

They work but definitely could be better. Too thin to really tighten and keep piping from moving. Spend your money on thicker versions.

These were good and look really nice

When I removed from package I was surprised how thin and weak this clamp felt.

These clamps are small for their labelled size. Exhaust piping is sized by inside diameter, these clamps are sized by outside diameter. If you have 2.5" exhaust piping, you will want to order the 2.75" clamps because the 2.5" will be too small and will leak. Other than that, the quality is pretty good. The bolts are strong and can be tightened up PFT with an impact without stripping threads.

Worn out clamps on exhaust pipe and resonator causes separation. Installed this, fits perfect. Now more secured. Good quality, does not easily deformed.

No las use, pero están muy bien hechas y de buena calidad

Great clamps