🔩 Seal the Deal with Confidence!
The Omix-Ada 16526.02 Oil Seal is engineered for optimal fitment in Jeep models from 1972 to 2006, ensuring durability and performance. With a limited 5-year warranty and OE reference 8121781, this oil seal guarantees quality that meets or exceeds factory standards, making it a must-have for Jeep enthusiasts.
J**
Excelente
Excelente producto, recomendado
R**R
Tight fit in 06 TJ Dana 30 front axle
Bought two of these for my 06 TJ Dana 30 diff. I was installing a spartan "lunchbox" locker, so decided to replace the axle seals while I had the diff apart. I used a piece of pipe to punch out the old seals and cleaned out the axle tubes as much as possible. I cleaned up the area the seals seat and then started the reinstall. As some have mentioned they were a *very* snug fit. I ended up having to be a little creative to get them in. I placed the seal at the opening of the axle tube in the diff. Then I used a large socket and placed it over the seal while inserting a piece of pipe through the opposing axle tube and pressing on the socket. I basically pressed the new seals in by tapping on the pipe and driving them into place. I could have never pressed them in by hand and the angle was not right to really be able to tap them in with a rubber mallet or something like that. The seals went in and looked good, but I could understand why people would have trouble with them. I probably should have looked up a few youtube videos for tips, but luckily I got them in before I had to call for backup.
S**5
Went in fine, haven't tested them yet because my jeep isn't ...
Went in fine, haven't tested them yet because my jeep isn't finished. Hopefully they will hold. They didn't seem real high quality but that remains to be seen
H**E
fit good on jeep 2002 tj
seem to be good quality ,time will tell.. installed them on jeep tj with dana 30 fit was good just keep straight when installing not to bend 36 mm socket worked as a punch inner axle seal front both sides about 3 hrs total from start to finish worth the work no more leak while you are there check them brakes ?
J**T
A pain to install, but you need em.
Product does what it's supposed to do. Make sure and take your time and set the seal correctly in the axle tube. If it gets in there crooked, pop it back out, inspect for any out of roundness. If it's good, try installing again. Such a giant pain for such a small inexpensive part, but you need them.
J**Y
Oil Seal
Arrived timely and a good price
K**.
Great price, but good luck getting then to install.
These wouldn't seat no matter what in my Dana 30 on my 98 XJ. Ordered the spicer version and boom easy install. Wouldn't recommend.
T**R
Good for the money
They where better then the factory ones
Q**N
Did not fit
Needed these and was working outside on the ground in the dark wasted an hour trying to get them in to find out there 2 thou too big
Trustpilot
1 week ago
4 days ago