Toyota Fuel Filter - 23300-62010

Genuine Toyota part. Fit on my 2002 Toyota Tacoma. No issues and I am very happy with this fuel filter purchase.

Works like it should fit perfect real pain in the ass to screw the fittings into an out of

Works for my 2002 Tacoma

Was a little worried about buying parts off Amazon. This part was as described, "easy" but messy to install because the siphon effect causes the fuel line coming from the tank to leak the whole time. Just work quickly if possible. It took a little while to get the front connection not to leak, I had to back it off and try it a few times. I think this is due to the flare connection on my fuel line being slightly out of shape. I had to tighten it down as far as I possibly could and after a few tries, no leaks. Part seems to work as it should.

Fits perfectly in a 2002 Toyota Tacoma 3.4L V6, took about 20 mins to replace, simple job for anyone to do with basis mechanical skills. I recommend using a 3/8" drive ratchet with 10" extension and a 10mm socket to remove the old filter housing bracket nuts (2 nuts holding in place). Keep nuts and set aside for use later as this new filter does not come with new nuts. Then using a 9/16" and 3/4" open end wrenches to remove the old filter. Have some metal can (I used a soup can) to catch the small amount of fuel that will come out of the lines when loosening. Remove completely and dispose of. Replace by first lightly screwing in the 2 mounting bracket nuts, but don't make tight yet only hold in place with a few threads so you can move the filter to line up with the fuel lines. Attach the "In" and "Out" fuel lines, making sure you're doing it correctly with the flow of fuel, and tighten using the open end wrenches again. Then tighten the mounting bracket nuts. Job done, pat yourself on the back because you just saved $100 doing it yourself than having the mechanic do it.

I returned product as you told me I could . I haven’t received another one in its place or notification of refund.Remember old filter didn’t leak but putting this one on which seemed correct leaked .Did you refund the money ?thank you

Fits well and was easy to install. High-quality. It did not leak. Will consider getting again.

The filter comes exactly as pictured, even with the little bracket! Replacing this filter was not as hard as I thought. Some notes from my experience:- Loosen the fuel line "keepers" to either side of the filter, that hold the line against the body of the truck.The more you loosen, the easier the line will be to manipulate.- The lips of the fuel lines center over a kind of cone-shaped nipple on the inlet/outlet of the filter. If centered exactly, you should be able to turn the flare nut almost all the way in with your fingers. If it's difficult or the nut won't go on by hand, jiggle the fuel line- carefully!- to re-center it.- Mine wasn't super tight on removal, but you might need a flare-nut wrench to prevent rounding the nut, if there's a lot of corrosion.- Check Youtube as the factory manual is not very helpful with this replacement.