acegoo RV Recessed Ceiling Light 2-3/4” 12V Dimmable LED Puck Light

We purchased these to replace the halogen lights in our 2005 Carver 444 MY. They are not a direct replacement but very close and wire in easily. Had to make the hole slightly larger to accommodate. Wish they had a spring clip to hold in place. Have used gorilla glue on a few to get them to fit well. They have plenty of light and are easy on the eyes even at night. Good to have less amp draw and updated lighting. They fit flush which is nice as the originals protruded about 1/4". Cleaner, nicer look.

We moved into our brand new house 9 years ago and the lights on the range hood were always very low brightness, plus they were an annoying (to us) cold white light, whereas the rest of our house is warm/incandescent colored LED lights. I'd looked a few years ago into retrofitting some different round LED lights into our range hood but I couldn't figure out how to replace them and what to replace them with. Fast forward to this week and I finally just started prying and poking and, lo and behold, the existing LEDs popped right out and were attached using easily removable connectors. I got these acegoo replacement puck lights, which come with bare/stripped wire ends, cut the connectors off the old lights, used butt-splice, heat shrink connectors to patch the old plastic connectors onto the new lights, snapped them into place and, voila, very nice, bright, warm light on our cooktop! Highly recommended!

I purchased these lights strictly for lighting my shower stall of my 2005 Jayco Eagle. I've been a full time camper going on 3 years now and this is a major upgrade for my 12 year old camper. I choose these lights mostly for the moisture resistance they claim to have. Installation was a breeze for those who are wondering. The spring clips literally suck the fixture into the hole once they are in place. I used 18 gauge wire and soldiered and heat shrunk connection points. For cutting the hole I used a 2 1/4 inch hole saw works perfectly for spring clearance once they are folded back. The lighting is perfect and evenly distributed throughout my shower. I've only had them installed for a couple of days but I'll will be sure to update in the future. Update: April 19, 2017 This Friday will be a month since I first installed the recessed led lighting. So far they are illuminating just like they were when I first installed them. They cumulatively are on for at least 4 hours and experience at least 5 or more on off cycles per day. They seem to tolerate the moisture and condensation and I haven't noticed any oxidation under the fixture coating. My only complaint is I wish I would of done my research on color temperature before I purchased the cool white version. In comparison the color temperature is equivalent to an iPhone flash light, since it is only in my shower I can deal with it. As of today this product still deserves 5 stars in my opinion and I would buy again.

We bought these lights to replace the stock halogen lights in our 2009 Winnebago View. They install fairly easily and appear to be about the same brightness/lumens as the halogens. A couple notes: While the light color temp (*K) is alright, they are not warm white (2,700 to 3,000 *K). They are a bit above that. They have none of the 'orange' tint that an incandescent lamp has. They are clearly "cooler" than the halogens and my 'warm white' LED flashlight. Still, they aren't obnoxiously harsh either. I think most people will find their color temp OK, but that's subjective. We plan to keep them. The wire that the mounting clips are made from is very small gauge, very flimsy and flexible. It makes them a bit difficult to move into position prior to slipping them into the mounting holes, because they twist. Nothing has broken so far, but the mfr could increase the diameter of the wire. The spring tension itself is fine. By comparison, the lights in our range hood use much thicker wire for the clips (the spring tension is a bit higher as well). The aluminum body of the lights feels substantial and the light is well distributed. These lights solved a few problems for us: * They allowed us to replace the halogen lamps with LEDs of similar brightness (if slightly higher color temp). * We were able to replace the fixtures and lenses at the same time -- which was important since the stock fixtures were/are cheap and the lenses kept falling off. * Less energy use * Less heat generated. The halogens will literally burn you they get so hot. They actually melted chocolate in the cabinet above them! It's amazing what 10W can do. Bottom line, assuming they are reliable and long-lasting, they are a good buy.

I chose these lights for the limited space I had in the ceiling of a cargo trailer I am slowly converting to be a livable kind of toy hauler. I have a temporary panel up to keep the insulation in place, and set these LED lights into the panel. Which was super easy to do after cutting the holes with a hole saw, and running wires to a switch by the door. They're powered from either a 12VDC power supply, or the battery/solar side if I don't have shore power. They add the perfect amount of light to the space, were simple to install, and look great. Highly recommended.

Fantastic area lights for my use which is a tad unconventional from what I'm assuming most folks are using these for in an RV or trailer. I put these in the rear hatch of my Jeep to provide area lighting outside at the rear when camping. My interior lights, while being very bright LEDs, just don't throw enough light outside at night. I was worried these wouldn't be bright enough, but they are just the perfect amount of light once its dark out and I'm extremely happy with the output. They work great for ambient lighting at the campsite and are great for fiddling with any gear I'm grabbing from the rear cargo area of my Jeep. They've already been a lifesaver when airing tires back up at night time as well as my compressor is mounted in the rear of my Jeep. I have no doubt these would work well as others have shown in reviews for the interior of an RV or trailer, but if you're looking for a nice area light for a different application like mine hoping this review will help you see how well they work for that. Unfortunately so far the one pic I thought to snap out at a camp site is one with my rock lights on as well as a projector running on my awning - but you can see where the light cut off is for the rock lights vs the Acegoo lights in the hatch as the color temp is different - this will give you an idea of the output outside at night.

Easily replaced the halogen puck lights in my 2009 Airstream. Used Wago wire connectors, mission accomplished in minutes. Overall diameter slightly smaller than original Airstream lights, but these replacements still completely cover the hole, and look great

Easy install. Great light quality.

Great lights. Suuuper easy install and great level of intensity. I have them on dimmers and they work wonderfully. Would purchase again for future projects. Highly recommended.

J'ai installé six plafonniers de ce type dans une chambre et l'éclairage y est chaleureux et lumineux. Je ne m'attendais pas à autant de luminosité versus la puissance utilisée. Le seul bémol, la grosseur des fils utilisés (Gage AWG20 possiblement) ne permet pas beaucoup l'erreur de manipulation et d'installation. Cependant, je compte en acheter un autre ensemble pour combler l'éclairage d'une seconde chambre. P.S. l'installation est simple comme bonjour!

Die Leuchten sind gut verarbeitet und haben einen großen Dimmbereich. Leider geben sie ein hochfrquetes Pfeifen ab solange sie gedämmt sind. Dieses Geräuch verschwindet erst wenn die Leuchten unter volllast laufen. Daher unbrauchbar....

10個程度使用しているが、結構明かるく、外れは無い。

色々と調べた中で最も薄型でした。 車の天井へビルトインしました。 発熱も少なく色味も私好みで満足です。 （暖色系系）