Custom PS4 Controller Bullet Buttons 9mm Brass Button set for PlayStation 4 controllers

The feel is a little weird at first and as others have mentioned, I could see the possibility of them sticking down, but mine have not yet. They are slightly smaller in diameter so they do rattle a bit. It's not by much but if you expect them to be as quiet as the original buttons, they won't be.The base plate that locks them in is probably a little too thin and may be the cause for the rattle. Someday I'll take it apart again and add some shims so that it shores them up a bit better. It would also raise the bevel on the side of the casing that might catch, to be above the plastic housing of the controller, helping prevent them from ever sticking.Over all, they make for some very cool buttons. I would recommend these to anyone looking for a unique set of buttons.

I love the look of these, but I'm afraid they won't last very long.When I was installing these on two controllers, I noticed that about 75% of them had at least one of the alignment tabs broken. It looks like the backing (and tabs) were 3-D printed into the casing, but the material was just too flimsy to even survive shipment.These are also slightly smaller in diameter than the stock buttons so there is a little wobble while playing. I haven't noticed it affecting my game play at all, but it might annoy some people. A few of them also seem to be ready to fall out (see issue above).I love the look of these, but I wish they were more durable.

They look fantastic. I don't think I quite understood how difficult it was to get the original buttons off to replace with the new ones. After all that work my x button didn't work at all. I had to take it all apart again and can find nothing amiss with the construction of the controller. I'll have to play with it a lot more to figure out what went wrong but wanted to warn anyone thinking of getting this that they should watch a Youtube video on how to open and close the controller so you will be better prepared and aware if this project is for you.

Love them! They look amazing, and I really like the feel of them. It's true the fit is a little small. I fix this with some Super 33+ electrical tape (don't use the cheep crap. The glue is garbage and wont last). Cut out little squares of the tape and place the button on the glue side Make sure not to touch the glue you are placing the button, again want good glue bond. Put some weight on top of the buttons for a few minutes to get a good hold. Next I used one of my hobby knifes ans cut off the excess tape off. I left them glue side up and cut on a piece of wood, easier then glass for cutting electrical tape. You may have to make a cut around the indent on the bottom of the bottom of the button, but do not remove the tape. Do this and you will love this as much as I do.

These were very nice in the beginning, I like the feel and they looked great. Unfortunately after about 3-4 months the tabs that keep them in the precise position in the controller had become too stressed and broke off to the point where these buttons would fall out of the controller. It looks like the base with the tabs are 3D printed, which in my opinion is a great way to get the desired base for these buttons. I do however feel that they may need to be thicker to prevent these tabs from breaking off so easy. I gave this a 2 star as I am unable to use this product anymore after only a few months. I am for sure depressed about it. I am just glad that i didn't have the heart to throw away my old buttons.

The item came home very damaged, 2 out of 4 buttons had the little plastic tabs broken (I attached an image showing which part of the buttons I'm talking about), without these, the buttons will fall off the controller very easily. The button is indeed brass, but the plastic tabs are not, they're very fragile and sending them through an envelope was not safe enough. Sending them inside a small box could've prevented this.Also, the circumference of these buttons is slightly smaller than the original Dualshock 4 buttons, so they will feel a little loose when using them. My suggestion is add some transparent adhesive tape around the button so it gives it more circumference, reducing the loose.One thing I liked about these is their weight, they are heavy, that's cool.

These look fantastic but I do have to point out that these are a little on the small side. They don't fill the whole button hole and have quite a bit of play to them. I wish I had read the other review prior to purchasing these. I picked up another pair at the same time (gold color) and they fit much better.

They look really nice, but they dont fit very well. When your controller vibrates the buttons make a ratteling noise because the fit is too small and bacause they are much heavyer.after using my controller with the new buttons i replaced the original buttons back, only becouse of the fiting. The quality seems to be ok