TACKLIFE Digital Caliper Measuring Tool | 0-6 Inches | with HD LCD Display, Inch/Fractions/Millimeter Conversion for DIY and Homework, Coin Battery Included

While these are ok, they're not really good. When you use calipers, you need to have confidence in the device, or it can lead to undue frustration. Given the entire device is made of plastic, these flex (twist, etc.) and while it doesn't appear to effect the accuracy, I have no confidence in the reading, so I get my "good" calipers to double check. I lead with these cheap ones that I don't care if they get greasy, etc. and only use the better ones (Starrett) on clean surfaces. Anyway...I usually don't mind the prosumer nature of Tacklife stuff (I have several of their instruments), this one in particular I'd recommend you steer clear of...

I build cars in my garage that I expect to explode in some fiery and dramatic fashion. Case in point, I blew the front main seal out of my drag car on it's second trip down the track. I left my manual dial gauge caliper lay out while grinding and filled it with metal shavings and ruined it. I needed a replacement that was accurate enough without costing so much that my negligent treatment of my tools will ruin me. Enter this here digital caliper. I chose it specifically because I can easily pop the battery out of the front when not using it so I can hopefully keep the battery from going bad for a while. Other than that I measure stuff with it and generally abuse and mistreat the caliper but it keeps on working. Nuff said.

I bumped my rating from 3 to 4 due to the courteous CS. The seller was volunteering replacement due to review alone. I declined, the calipers do what I need... allow me to be careless with little cost. They're plastic as advertised... The battery cover was loose in the box, installed battery and still had to put a tape-stop on the cover. The auto-on feature is too sensitive, this thing seems like it will turn on bumping around, so I'm not expecting long battery life. I did get 2 of these cheap-O's for just tossing in the tool boxes. I have steel/quality calipers with the keep-safe tools. It's nice to have handy for drill, hole, screw sizing. The fraction display looks handy...

Obviously, this is not a professional quailty precision device, but rather a great tool for mostly accurate work at a great price. It definitely fills this niche well. The manual claims a repeatability of .1mm or .01", but the ones I recieved would vary in measuring the same items by about .3mm or about .035". This is fine for common measurements, but not sufficient for anything requiring high precision. I've bought both good calipers and cheap calipers, and these have the worst repeatability of any I own. I guess I'll usue them in the garage for measuring fastners, as it is plenty accurate for that.

This probably isn't the most version of this tool. It's mostly plastic, so the jaws will dent over time. It's basically disposable. But, for my casual woodworking use, it does the job, is more accurate than I need, and will last years. It was also really really cheap. This was a really good buy for my needs. I especially love that I found one in this price range that will handle fractional inch measurements.

Okay, these are not going to help make the next Space X, and I would not trust them for anything critical, but when you just need to be close for some home 3D printer designs, they are totally fine. Problem areas really are only that it doesn't repeat measurements or slide open or closed to the same point perfectly well - but again close enough and pretty impressive for something so cheap! I bought three of them.

Quite gadget. So far I love it. The conversion of decimal inch to fraction is unusual and extremely handy. Very thin and light and the numbers are small. Not made of metal. I don't know how long it will last but for the price it is amazing. Going to order two more for friends.

I am using this in my workshop mainly to measure wood thicknesses. Works great, is accurate for what I am using it for. Seems durable and easy to use, Nice that it has FRACTIONAL as well decimal and metric conversions. Easy to convert from one to the other with the push of a button. Also great for measuring dowels and hole diameters accurately. Nice Amazon find.

Calibre digital con pantalla.Fabricado en plástico y con un tacto a la hora de medir correcto, al ser de este material se pierde la sensación de robustez de los Metalicos.La medición es correcta, marca la medida con dos decimales, además cuenta con varios botones como no/off puesta a cero.El precio es sensacional cumple con su cometido, yo lo estoy usando para calibrar una impresora 3d.Lo único que no me gusta y ni le va a restar estrellas es la tapa de la batería se abre muy fácilmente.

La descripción indica que la resolución del calibre digital es 0.0005 ”/0.01mm/ 1/128”.Sin embargo, el modelo DC03 cuenta con una resolución de 0.01'' / 0.1 mm.Arroja un resultado en la medición en mm de un solo decimal.Tampoco muestra el resultado en forma de fracción.

necesitaba un calibre digital y la verdad que esta marca la uso desde hace tiempo y me gustan muchos sus productos, tiene una precisión muy correcta llevo tiempo usandolo y cada dia me gusta mas. la única pega que le pongo es que la tapa de la batería se abre muy fácilmente. seguiré confiando en esta marca.

Pie de rey muy básico lo compre porque ponía que era de acero inoxidable pero cuando me llegó era plástico el material entonces lo devolví por el precio que tiene no está mal pero se ha de saber que la estructura es de plástico y que no lleva para frenar el calibre por el precio que tenía esta bien para lo que es pero yo buscaba uno de inoxidable

Es de plástico y se ve muy endeble. No es lo que esperaba, aunque por el precio que tiene, tampoco se puede pedir peras al olmo... para salir del paso está bien, pero en mi caso, compraré otro que me dé más confianza