Paintball Scuba Fill Station

This works perfectly with my PCP airgun ! Even with my brand NEW 80 cu ft scuba tank. No modification required. No extra tube tube required (although you might still want one for convenience). Why spend $120.00++ with others? Over 300% More?? Amazon delivered this to me for $37! In two days. My PCP Marauder 25 took 3000psi from it right out of the box with no problem ... just orient the pressure gauge downward & carefully position the barrel above, then pressurize away! The build quality even seems very solid, I expect it will last for many years. After using it a few times-- I'm still 100% happy with it, and that is a rarity!

Read the reviews on the different offerings here on Amazon, and went with this Ninja yoke for the fact that its made in the good old USA. It did not disappoint. Paired it with the Ninja 4500 PSI whip bought on Amazon too, and the total price came out much less than the Crosman set up. Have it hooked up to a 3000 PSI SCUBA tank and now my Benjamin Marauder and I are best of friends.This unit feels solid, and mounts to the K valve on my SCUBA tank perfectly. You don't have to use much pressure to seat it on the tank, just enough to secure it, that's all. The bleeder valve works as expected, no complaints there. This is a solid performer anyway you look at it. Also, looks and exudes quality. Since the valve's fill pressure is 3000 PSI, I don't have to worry about over filling my Marauder.This yoke with the whip, and a used 3000 PSI 90 CU FT SCUBA tank comes out to be less than the Benjamin hand pump.

Works as advertised, Installs on to K-valve in 30 seconds.The gauge on it does not read accurately; when filling my HW100 the rifle's gauge reads 200bar, and the gauge on the yoke reads somewhere between the 2-3 9 (2500psi) mark.Also, the internal regulator set at (3000psi) does not work properly, i ended up over filling my HW100 to 3200psi. i bought this particular yoke to prevent overfilling, since its supposedly regulated for 3000psi, so it kinda failed in that aspect.The build quality is great it made from 1 single piece of aluminum.The knurling on both screws is done neatly, and work great and it remain in place once tightened.the quick connect/disconnect works great.make sure to get a 1/8Male BSPP connector to attach from the yoke to the fill line.despite the few quirks....i may purchase again on the future.

For anyone with HPA tanks and the desire to play backyard paintball tanks, this is a must have. I rented a couple of scuba tanks from a local dive shop and used this fill station to fill our HPA tanks. It worked flawlessly. No issues whatsoever and we were able to play all day. This is well worth the investment if you use HPA tanks and have or rent Scuba tanks to fill them.Instructional videos are easily found on youtube if you are concerned on how to operate the fill station. Its a very simple process to follow in order to fill tanks.

I purchased a synthetic marauder .22 PCP, a 80 cu ft 3000psi scuba tank, this Ninja fill station and an extension foster fitting whip. The Ninja station worked great and the set up allowed precise control of the psi level in the gun. The bleed valve allowed clearing of the line after filling, so that the whip extension did not flail during disconnection. Very pleased. No pumping. All purchased on amazon. Set-up for fill station without the gun ~$230

Ninja makes the best air system products in the paintball industry. This fill yoke is no exception.Fill yokes are simple for the most part. K-valve pin, on a frame with a 3K output, bleed knob and gauge. All pretty standard stuff.What set's Ninja apart is that it is made in America, has clearly marked labels (most others don't have labels at all), ninja ultralight gauge, and top quality fit and finish. It also costs about the same as those generic fill stations. So why even bother with them. Just get a Ninja.

It wasn't the item in the picture and the Ninja 48/3000 tank couplet wouldn't fit in the fill station.I wouldn't recommend this product to anyone. If you buy, make the retailer test it first to ensure they fit.

Just used it today and it is excellent. Does exactly what you expect, and no leaks. The Foster style connector is a perfect match to the Ninja Microbore Fill Whip Hose. I'm using them to refill a PCP air rifle and they both work perfectly.Always nice when a product works as you expect it to work.