Wqingng Remote Control Switch AC 85V 110V 220V 2CH Relay Wireless Remote Switch Receiver + 3 Remote Controls

Description

Colour:2 Learning the transmitter: ( Toggle Mode ) - Programing a 2 button transmitter as toggle.STEP 1: - Press and release the learning key on the receiver TWICE. - Wait for a moment , the LED will turn off, indicating you entered the learning state.STEP 2: - Press and release the first button on your transmitter, the LED on the receiver board will flash on then turn off, indicating the button was learned.STEP 3:- Next press and release the second button, watching the LED go on and off again. - Wait 3 seconds, the LED indicator will turn on again, indicating system is ready for useSpecifications:Material: Plastic + MetalColor: Black(Transmitter) + White(Receiver)Size: (Approx.) Receiver: 75×55×25mm/2.95×2.17×0.98in Remote Control Transmitter: 60×29×11mm/2.36×1.14×0.43inInput Power: AC 85V-250VStandby Current: <8.5MAWorking Frequency: 315MHz/433MHz (Optional)Channel: 2CHRF working mode: superheterodyneReceive sensitivity: > 97 dbm Transmitting distance: More than 15 metersDecoding mode: MCU software decodingLearnable Transmitters: 1-16 transmittersSupport remote type: Learning code（1527) Switching Modes: Both Momentary & ToggleWiring type: fixed terminal Switch Output: normally open & normally closedSwitch Output: NO: normal open COM: common NC: normal closeWire port: NO: normal open COM: common NC: normal close