ELECTOP 6 Way 12V/24V Fuse Block Blade with Negative Bus | 6 Circuit Fuse Holder w/Negative Bus, Waterproof Protection Cover Sticker Labels for Automotive Car Truck Boat Marine RV

After reading several reviews of several different fuse blocks with grounds with problems like lugs stripping and ground bus bars being to close to the positive I rolled the dice and bought this one to use behind the helm of a boat. Comparable to Blue Sea 6 fuse block at $67 this is a great value at $17. It's very solid and has a quality feel to it. I opened it up and the lugs are held into place with double nuts so it will not strip. The negative bus in the right of the picture looks like it's a milometer from the positive, but the negative is actually recessed below the positive so no chance of a short. Fuses hold nicely but are easy enough to remove. Also checked and all metal components are stainless steel, so it is marine ready. Now the bad as others have pointed out. Absolutely not even close to waterproof. Cover is ridiculously oversized and sits way to high. Overall a lot of bang for the buck on this solid fuse block.

This panel is a great fit. I have it installed in my F150 right next to the OE fuse panel in the cab (passenger kick panel). You wouldn't know it's there if not for the 30A breaker I have in the engine compartment on the 10ga wire feeding this from the battery. The terminals are all a great fit and I had no issues getting standard ring and spade terminals to work with this panel. While this is great in a vehicle interior, this panel is not waterproof. I wouldn't recommend using it in the engine bay. The cover is enough to protect it from wet/snowy feet getting in and out though. The built-in ground bus provides me a nice auxiliary panel for aftermarket equipment on my vehicle. This is much better than using in-line fuse holders and grounding to chassis. I have this panel providing power to my dash camera, LTE router, and an ethernet switch. To save my vehicle battery I have also wired in a Havis Charge Guard (sold separately) to kill power completely once everything has shut down on its own or if the battery voltage drops too low.

Seems pretty well built. Washers and bolts are not magnetic so likely stainless. The + and - strips internally are very close together but at 12VDC its not a concern. You should be placing a fuse between this and the battery anyways so in case of any worry you are safe. Fuses are a very snug fit in their holders which is good. Each positive output is separate and only hot when its specific fuse is installed. One review said something about a distribution block and I can't consider that a a proper name for this fuse block. I cut openings in the side of the cover to run my 10AWG leads out to one side, making the whole thing more compact lengthwise. Cover is too tall but no real easy way to shrink it down so you simply need the room for it. This will be used on a motorcycle to add some lights. Your main cables should match your initial fuse size choice so even though I used 10AWG it will never see big amperage. Good unit and recommend if it fits your use and size.

Used it on my club cart , it worked perfectly for all my add on’s

Installed on my motorcycle to give me more exsessories without overloading the current fuses

This is a very good fuse block. It is very compact and can deliver up to 20A per circuit, and can handle up to 75A for the whole block. It can be used on 12V and 24V volt systems. That is impressive for such a compact design. It has 6 circuits for lots of accessories. The fuse block is easy to place and install. Wiring is a breeze and it performs very reliably. It comes with fuses, protective cover and identification stickers for each circuit. This fuse block is well designed, top quality and is a great value for the money. I give it 5 stars.

I can't comment on the weather or water resistance of this fuse block because I installed it in the interior of my car. But where I installed it, and for my purpose, it was great! I had a few things that I needed powered in the rear of my car. Rather than have a bunch of separate conductors and fuse holders hidden behind a panel that I wouldn't be able to easily get to if need be, this block is perfect. I ran a single 10g wire from the battery to the rear of the car to power the fuse block, another 10g wire was used to ground it to the chassis. Everything is now fuse protected in an easy to get to location.

I haven’t tested it yet but have it installed. Made really well. I cranked the main posts pretty hard to see if it would break. They didn’t. Same on the fuse screws. It.’s well made

Quality goods

For RV power connections

This is a great fuse block to use on a golf cart for accessory lighting, easy to install and easy to use

Quality is good so is price.

Arrived on time and product as per description. It worked out great for my project, I recommend.