RuggedFront Electric Power Steering Kit for Yamaha Rhino 450/660/700, is A Bolt On System, Gets Rid of Wheel Jerk/Bump Steer When Navigating Rough Terrains (See Fitment Details in Description)

Installs very easily and quickly but brake switch is an issue that should be addressed

Works great. If you don’t want problems with the shaft hitting your brake switch, put everything on without tightening it and you can easily adjust it after so it doesn’t touch at all. I put this on a 2006 rhino 660. * I took the picture before I zip tied the wires out of the way, but only one and they don’t even come close. One finger easy to use on steering now!

no change in steering

Real fast delivery. Took about 2-3 hours to install. Cleared the brake light switch with plenty of room. What I found was to assemble it completely with the controller mounted with the wiring harness plugged in. Leave all the bolts loose including the sliding u- joint that hooks up to the bottom of the motor. You can then juggle it in place and start tightening it all up once you get that upper joint to clear the switch. If the sliding steering shaft joint is tight you can’t get enough adjustment It needs to be up close to the limit at the end of the shaft to get enough twist on the mount. The photos show the angles I used when mounting. Mount the regulator upside down with wiring up into the cowling. Definitely worth the cost to have easy one handed steering and save your wrists and thumbs from kickback.

Easy to install and works wonderful, should have bought one, years ago.

So far it is working A1

Vraiment cool et expédition ultra rapide 👍🏻

incredible difference. fairly easy to install