🚀 Elevate Your 3D Printing Game with Smart Precision!
The Sovol 3D Printer CR Touch V3.1 Auto Bed Leveling Sensor is designed specifically for Sovol SV01 and SV03 models, enhancing your printing experience with versatile compatibility across various bed materials. Its self-test feature and real-time LED alerts ensure optimal performance and reliability, making it an essential upgrade for any serious 3D printing professional.
S**W
Product is what they say
Easy to install the hardest was finding the correct coding and firmware update. Youtube has several to watch and would recommend reviewing several. Directions are printed very small for me, may not be for you. The also leave out what to download or where to go unless you read the whole pamphlet.
B**N
Doesn’t work well on SV 02
I have these on all my 3 d printers and they all work great. This one the included mount doesn’t fit the SV 02. I was able to draw one up and print it and got it mounted, but for some reason could never get the z distance to work. I would get it set, and then when it started to print it would be way off.
R**N
Took off 1 star for terrible instructions.
Overall a good product. However, the instructions to install it are terrible. It also didn't help that D11 where the three wire plug is to be placed, was covered with hot wax. The instructions online have a different set of wires (red and black) so there was no indication which way the blue, red, yellow wires are positioned. I included a picture of the wire orientation. Also, when installing this, disconnect the display (EXP1 and EXP2). This will allow you to move the ribbon cables for more room.Detailed instructions can be found on YouTube. Look for the video "Sovol SV-01 BLtouch and Silent Mainboard Install" by Joshua Bardwell. This will guide you through the complete installation, where to get the correct firmware and the needed GCode to use the BL Touch. I just finished with his video, got that correct firmware (Sovol doe not link to the correct one) and my printer is working like a champ.
C**S
wrong adapter mounts. won't fit svo2. Useless.
wrong adapter mounts. won't fit svo2. Useless.
E**E
A bit of a headache
Mine mounted at an angle and the screws went in too far so the nozzle did crashed into my bed. I had to add some washers to compensate for the bltouch not being lower than the nozzle and for it being at an angle.l instead of being straight down.
C**G
This is THE Must Have Upgrade to a 3D Printer
Put simply: If I buy any more 3D printers, they will have some auto bed leveling tech in them. This upgrade made it simple and fast to level my SV01's bed and keep it leveled. All my current ones will eventually get this upgrade.It loses 1 star only because my kit didn't come with any hex nuts to hold the BLTouch sensor probe on to the mount. So I bought a small pack of M3-.5 Nylon Filled Locking Nuts from my local hardware store to make sure it stays mounted.
L**S
PIA defects
A lot of time wasted trying to get a bad part to work return the bad BLT and did without!
V**O
terrible quality
The fun cover always falls and messes the printing. Just to save one screw.Hard to print with ABS
U**I
Prompt delivery, worked immediately
No issues and arrived Sunday morning so I did not have to wait a week to get my 3d printer running again!
Trustpilot
3 weeks ago
1 month ago