Kichler 6-Light Linear Bathroom Vanity Light Fixture, 36" Chrome Bath Bar for Bathroom over Mirror, Modern Transitional Wall Mount Lighting (36" W x 4.25" H x 2" D), 626CH

Could be 4 stars: mine came with a corner bent inwards. I did not notice it when I originally tested it by terminating the leads onto a plug. I noticed it during installation. I decided to keep it. I can hide the imperfection by putting it on the top-side of the installation. Some information missing from the description. 1. This is 2 banks of 4 lights for a total of 8. So 2 black and 2 neutral wires. 2. There is a single hole to feed the 4 wires into a centrally located junction box. 3. I think there are slot knockouts for mounting around a central box. I did not use them (special situation). 4. There are two slots near the ends of the back bracket, about 38.5” apart. I used these to mount the fixture. My personal experience: I was replacing two separate lighting kits above a double sink vanity, so i had two junction boxes, not a single centrally located box. By a strange stroke of luck, the two boxes had mounting holes located about 38.5” away from each other. It was not perfect, but also not worth widening a mounting slot with a drill and risk a mistake. Got things lined up enough with some screws and fender washers to step the frame towards the wall. It was flush and secure. Speaking of steps, i bought some step bits. The two four-light socket banks are basically spring mounted into sets of dual-slots (maybe that will make sense if you see it - remember that not all springs are compression springs). That means they are removable. Instead of the leads all pointing towards the middle, I removed the sockets and arranged the two sets of leads to point towards the ends. I drilled some holes through the back bracket with my new step bits, installed some rubber grommets, and connected my leads into my pre-existing boxes. Actually went way simpler than i was worried about. What I like: the bulbs point out. Our old setup was 2x4=8 LED globes pointing out. Great light output. Something like 580 lumens per (dimmable). Original reno choice was 2 sets pf 3 pointing down. Loss of 2 bulbs (same bulbs) and change in orientation made the master bathroom, well, dark. This fixture gives us 8 pointing out again, with a nickel finish instead of chrome. Keeping. May add pics if i remember later. Still WIP.

Nice design at a great price. Used with LED bulbs. Lucky enough to get one that wasn’t previously used or returned. Had no damage, bends, or scratches. Install was easy and it’s a nice product. Make sure to follow the advice here on other reviews of how to pull off the decorative pieces to get to the instructions or you will damage it. I suspect any returns and damaged items are from people not knowing how to remove the face plate from the bracket because the instructions and parts are inside the housing. If you’re lucky enough to get a new one that wasn’t a return it’s a great purchase.

This duplicated my original light fixture but it has changed some since the original was installed 33 years ago. The "clips" are different but I was able to swap them into the old base, install the new cover over the original base, and I did not have to drill any new holes. Looks good.

Nice looking. Great replacement to an old veeeery rusted vanity light of the same size. Relatively easy to install “IF” you have extra wall anchors. Reason why I gave it 4 stars is because the anchors provided do not really fit the screws that were provided, so more of a a hardware issue. I’d recommend the manufacture to provide better quality and sized anchors based on the price. Also one corner was deformed formed which I had to re-straighten. Overall happy with purchase as the measurements matched the replaced vanity light specs and wont have rust sprinkles all over my bathroom sinks for once.

Excelente Lámpara muy buena calidad bonita y fácil de intalar

All of the little sockets that hold the bulbs are loose and look like they are falling out. There are no instructions. The hardware used to mount this light are stuck inside it and it's not possible to get it out. There is no possible way to mount this on the wall. I don't know what this company who made this is thinking. The video that Amazon posts on how to install this light is for a completely different light. It will not help you in any way.

Worked as advertised and the best priced option

easy to assemble and install, with some electrical Knowlege, does not come with lights I had to buy separately. we bought the warm white. looks great.

It looked good

Over all a nice fixture but the instructions included weren’t very clear. Took some brainstorming to figure out how to get it apart before hanging it.