Electronic Cabinet RFID Lock, Hidden DIY for Wooden Drawer, Cupboard, Wardrobe - Punch-Free

Decided to install lock in my custom built media console when my 1.5 yo figured out how to open it and started to peek inside. Works perfectly without having to drill any key holes and such.Regarding installation, it was a tricky one. The included manual does not have installation instructions and it took me some time to figure out how to align both pieces to match. The trick here is to use double sided tape while you’re aligning them, so you do not need to drill holes to hold them in place. First, push the smaller piece into bigger one, then tape bigger one inside so that smaller one is almost flush with the surface where the door will be. Then add double sided tape to the smaller one, peel it, close the door (thus pushing the door against the tape), then unlock the lock with NFC key and open the door. The smaller piece will stick to the door thus marking where it should be. You might need to adjust the bigger piece forward and back (unpeeling tape and sticking it again) to ensure that the lock engages properly and does not leave a hole between the cabinet and the door.

A bit finicky to install but works great

I got this to lock a cabinet door to keep some stuff locked away. Overall it's great! The cards all worked right out of the box, but I reset and reprogrammed them anyway using the included instructions. I had to fabricate an additional latch so the one lock would secure both sides of the cabinet, but it was pretty easy to do. I was struggling with installation as I wanted the small locking pin on the door but then I couldn't get the card to read. I ended up moving a few things around a bit and got it working. Instead of putting the card on the face of the door, I put the card on the shelf directly above the cabinet. The reader easily worked through the 1/2 inch shelf. Now everyone thinks I'm some kind of secret agent because I use a key card to open my cabinet!

Wasn't super easy to install because the depth of the cabinet was slightly deeper than the locks size, but after a little fixing, i got it to work. Once installed, it works great. The cards work through 3/4 inch wood.

I used this for a Wooden American Flag concealed gun cabinet project. Worked through around 2 inches of wood! Easy to install just have to match everything up so the lock and locking mechanism fit just right. Comes with plenty of key fobs and instructions on when the batteries need to be changed. I also liked that when the battery gets low it will keep it unlocked until you change out the batteries. Great product would recommend.

Unfortunately mine wouldn’t unlock after a few months. It’s was on a cabinet that i rarely use and one day it just wouldn’t open. This was disappointing because I used glue when building the cabinet so getting inside was tough, but at least it was wood. I made several duplicate fobs and none worked.Until it stopped working it was awesome. I’m not going to risk it again. In fact i don’t think I’ll ever buy a powered lock again. Combination locks always work.

This is really nice. It is easy to install and works great. Nobody will know there is a lot on it unless they pull it. I highly recommend. And you cannot open the door when locked!

Great customer service...Product was bulky and slow to react

The red so called rfid tags don’t work . Smart card works.Main problem is the lock is not holding correctly , can be easily open without key.

RFID tag not received with product only smart cards received. Can’t carry smart card. Need RFID tag. Please get it delivered if your showing it with your product.

La instalamos en unos cubículos y es facil la instalación y funciona muy bien