OVERTURE TPU 95A Flexible 3D Printer Filament 1.75mm, 1kg White

I purchased this spool of TPU to replace a few kitchen gaskets. My 3D CAD skills are limited but I do know how to draw circles and apply dimensions! The gaskets turned out perfect. The bed adhesion was a bit too good but I used some IPA to release the gaskets from the build plate. No issue with clogging. I printed a spool holder and a filament guide for TPU printing. I had to bypass my AMS and feed the filament directly to the input of the extruder. No issue with jamming at the extruder. I am very pleased with the feel and quality of this filament.

I have used this filament for a combat robot and it worked great. Printing was no issue once I got my settings dialed in and what printed was durable enough to give me a chassis that lasted a tournament run to second place. Printing: The TPU prints great. When you are printing with TPU, you generally only have to worry when you are still getting things dialed in. Once your settings are good, you don’t have to worry too much about the bed adhesion or layer adhesion. Overall, TPU is a decently forgiving material to print with, but only when you have decent settings. Use: In my competition I printed a few chassis and several wheel guards. For this, I needed the chassis to be pretty durable and the wheel guards to do their best at protecting the wheels. Overall, they did great. I didn’t need to replace my chassis once and only replaced 2 wheel guards throughout the whole competition. The material is hard, durable, and great to print with. As a whole, I think this filament is great and well worth the money.

Works well, haven’t had any printing issues so far. Cheap too so that’s always a plus.

I had a lot less trouble than I expected getting this to print well (Ender 3 Pro, 20mm/s, 200C .4mm nozzle, 60C PEI bed). Prints nicely once you get past the first layer, and does not smell. Had to use glue stick to make sure the first layer went down well enough. This stuff is fairly tightly wound onto the reel, and tends to stick to itself like rubber bands, so it is difficult for the extruder to unwind. So, I simply pulled off enough length to do the job and let it fall on the floor where it would be easier for the extruder to draw in.

Printed fine no issues. Prints felt strong and squishy would recommend for a good budget tpu

Very utilitarian

Amazing, Printed the left sneaker with it on the Bambu A1. Slowed everything down and used the profile provided by Overture for the Bambu A1 3d printed. It was a little stringy but that was no problem at all. Even the TPU supports of this same TPU material were very easy to remove! I beleive the stringiness can be removed by lowering the nozzle temp.

filament is great and works well (of course im new to this hobby so if there's flaws I wouldn't really know yet) The only thing though that I was disappointed with is that when I order PETG from this brand, I get a nice resealable bag. In fact I love that added touch of giving a complimentary printing surface and resealable bag... but weirdly enough, PETG doesn't need that as much, whereas filament like TPU and PLA wood and stuff like that does... and they didn't come with those bags. they were just vacuum sealed and that's it. From my understanding those filaments are far more hydrophilic or whatever its called, than PETG and need protecting all that much more. So I was disappointed that bags didn't come with it. I'm not rating it down for that because those are complimentary things, but it was in fact one of the reasons why I was continuing to purchase from this brand because of the value and the extra things I was getting that can help me protect the filament.