Prime-Line MP53280 Joint Rod, 6-1/2 In. Length, Fits Ez-Flo and ProValve Faucets (Single Pack), Zinc

Works as expected. The nylon ball can be moved (with difficulty) if needed if the rod it too long.

An exact replacement for a builder grade pop-up ball joint rod at a very affordable price. For the price of ONE at the local store, I can replace all 4 in my two, double lavatory sinks. The ball is 15mm/.59 inches and the rod projects 1.4 inches from the ball. Originally, like others have mentioned, I thought the rod was too long as it initially rubbed against the tail pipe. thinking I might have to cut/grind it down, upon taking it out again, I realized that when putting it on, the inside plastic seal had fallen off. Once replaced, it fits/operates perfectly. Note that it comes with TWO plastic seals. One should be placed on each side of the ball to seal and provide smooth operation of the ball.

Fits great in my old bathroom sink, leaks from it either. Easy install

I gave it four stars because I had to use the original nut to install it. It seems that this should work for most, but you may need to reuse a part, as I did. The cost is low enough to give it a try.

I received the product as in the description. I received it within 10 days from the date of purchase. Packaging the product is excellent and quality is very high

I ordered this based on answers to questions and reviews. I was expecting a 5/8 in bench ball, but as you can see in the photo it is about 1/2 in. I'm not sure how long the part that sticks into the sink and pops up the stopper on the old piece was, but with the new unit the plunger seems to pop off easily. Despite the ball being a smaller size, I put the plastic washers in front of and behind the ball and tightened the nut as much as possible. It doesn't look pretty, but so far no leaks. I measured the old plastic nut to approximate the correct size, the metal one with this was a bit smaller. On closer inspection, the old plastic washers was too small as well, probably why it broke when I tried tightening it.

I have found that these lift rods work great for my 20-year old Danze drains. The nut fits the drain and the two-sided washers ensure no leaks. Just be sure to get both sides of the old washer out before installing.

Works as shown. Easy and simple to install. No notes..

Cheap and works fine!

Came with all the parts needed. Install in my sink and works perfectly. Will definitely buy again.

As you can see, the dia of the rod is little smaller than the original one, so is the pivot ball. But finally it seems working well with the two washers provided. Also I used the original plastic nut instead of the slim metal one. I fixed my lift rod with ~$7 so I am happy with it.

Fits perfectly as replacement to our broken joint rod for the sink drain cover to lift up/down. Great as a replacement for repair purposes. I bought two just in case another sink drain decides to break apart (due to rust, they actually can break apart/rot/rust out.

Needed to replace a 20 year old bathroom sink drain part and fit just perfect.