🌟 Elevate Your Cooling Game!
The AeroCool Touch-E Fan and Temperature Controller (Cooltouch-R) offers advanced cooling solutions with individual fan speed control, smart connectivity options, and customizable LED lighting, all wrapped in a sleek touch interface.
I**P
Touch screen is nice, fans will blow 100%
Works as advertised. Touch screen is nice, fans will blow 100%, 24/7, only logical. However, is a good 'wow factor' for guests.Fitment 75 out of 100. Cheap plastic that is very flexible and leaves slight space in-between bays.
A**I
Great purchase!
This is a must have item in your build. Will allow you to control up to four fans simultaneously and reads multiple sized media cards. The 3.0 USB charging port is a plus and stays live while computer is off. Can program display to display up to seven different colors for each individual fan. Comes with a little disk to install drivers, and the program doesn't interfere with any others. The touch screen is ultra responsive and this thing looks absolutely sexy installed on one of the lower drive bays. Same size as a DVD/disk drive. I've had this thing for over 9 months and not a single problem. The colors screen looks very uniform and ultra vibrant color. Looks very high end and made from very exceptional materials. I feel very confident in recommending this product and so have given it a 5 star rating.
J**.
No no no no no
It said nothing about the connection layout. The wiring on the back of this thing is a mess. It has molex and fan connectors together and the ends, and it makes for an incredible mess
B**K
Impressed
SO far it does its job.... no smoke, no fumes, no problems
F**X
Three Stars
Can't really control the fans,have to do it through the PC. But its OK.
M**E
Perfect device.
Perfect controller with card reader and usb slot.
G**.
Nice led face plate
Nice led face plate. The ends that connect to the fans are very cheap. Will not control large fans. The power out put is not their. SD card reader works great.
A**R
Five Stars
Thank you
N**E
接続コネクタと回転速度
Amazonでよく見かける普通のファンコントローラーは3ピン、4ピンでしかファンと接続出来ないものが殆どだと思いますが、このファンコントローラーはペリフェラル4ピンコネクタでケースファンと接続するコネクタが初めからあるので、変換コネクタを用意する必要がありませんでした。ファンの回転を完全に止めることも出来ます。3段階の速度調整は古くてノイズが出るファンを静かにしたい時には便利です。
J**H
Top Notch Fan Control At the Tap of A Screen
Easy enough to setup and fastened in the bay. There is now hard wiring you need to do before putting this into the selected bay, just remove from box, untie the cables from their twist ties, insert, screw in or pin, plug in the cables you need with the fans you want controlled via 4 Fan connectors and presto!Now, as it mentions in the details, this has 7 colors to choose from ((Red, Green, Yellow, Blue, Purple/Magenta, Cyan, White)) as well as an option to turn it off as well. You can control up to 4 fans individually via touch panel, each with 4 speeds ((Zero, Low, Mid, High)) that can be set. With a small heat gauge that you can place somewhere in the PC it will take the core temp in either Celsius or Fahrenheit that can be changed at the tap of the screen. You can set it up to read SD cards and such as noted in the details as well as a USB 3.0.For those wanting something a bit more fancy for their rig I do recommend this. It works great, looks great, and honestly I think the $55 price tag is fair, feels like a steal.
J**E
One Star
SD reader dont works
M**I
Nel complesso valido ma...
Prodotto nel complesso valido, promette quello che offre secondo manuale creando anche un pizzico di estetica in piú al vostro case peró mi sarei aspettato una rifinitura dei cavi migliore e piú in linea con il prezzo di Amazon. Si ha la sensazione generale di aver pagato un prodotto per l'utenza finale ma con il retrogusto di un prototipo ossia di un qualcosa di buono ma non ottimizzato e che avrebbe potuto marcare la differenza nel panorama dei controllers per ventole.PRO: touch screen semplice, reattivo e con pochi fronzoli sperando che non presenti difetti futuri. Buona gestione delle ventole del case suddivisa in quattro canali che reggono fino a 20W ciascuno con pin sia da quattro che da tre (testato su 3 Corsair 120mm da 12v a 3pin con led rossi su Corsair Carbide Spec03) dove in termini pratici ti permette una migliore tutela delle ventole che senza un controller non avrebbero consumo a via di mezzo. Regolando tutto su media potenza si riduce notevolmente il decibel dei 1600 e passa giri massimi garantendo medesima efficienza di ventilazione interna fino a uscita posteriore (la mia configurazione prevede le due frontali in entrata, la posteriore rivolta in uscita). Il lettore schede (che si collega al canale interno USB 2.0 della motherboard) e la porta USB 3.0 che sono un optional non da poco anche se personalmente ho totalmente ignorato la seconda avendo giá due frontali e due posteriori.CONTRO: qualitá dei cavi nella media e leggermente sovraprezzati, lunghezza appena sufficiente, possibilitá di applicare una sola sonda termica che, come suggerisce lo stesso display, andrebbe a indicare le temperature interne generali. Vi consiglio di applicarla alla lamiera del dissipatore della vostra CPU come indica l'esempio n.2 sul sito del produttore.In conclusione, AeroCool é la classica azienda non male ma che potrebbe diventare notevole se ampliasse l'assortimento di questi prodotti per ogni tipo di configurazione/esigenza utente. Ad esempio, ci starebbe alla grande una variante come questa con display piú ampio e centrato, assenza di lettore schede e presa USB 3.0 per chi lo ritiene superfluo e la possibilitá di applicare tante sonde termiche quanto i canali disponibili quindi ben quattro anziché solo una in una soluzione da unico bay (invece della costosa soluzione doppia che offrono sul sito). Tra l'altro le sonde sono anche estremamente accurate se applicate secondo istruzioni del produttore.Saluti!
A**O
Frontalino tuttofare
Giunto con perfetto tempismo in scatola perfettamente sigillata e celophanata all'esterno mi è scattata una perplessità nel groviglio di fili anche se etichettati che a primo impatto mi hanno lasciato perplesso.Ma andiamo con ordine.Cavo principale a 19 pin o per chi lo preferisce 20,un sensore di temperatura,un micro cavo pin controllo ventole.Attenzione a non tirarlo troppo,è trattenuto solo da colla termica. Ma andiamo alla chicca.Doppio collegamento fan per attacco moleh a due pin e oer attacco piccolo sempre a due pin.Massa enorme di molex che si viene a creare che viene voglia di tagliare e saldare al bisogno.Bastava non montarlie ognuno poteva configurarli come meglio credeva. Ma la cosa che più mi ha colpito è l'unico sensore che a lume di naso non sai dove piazzare.A caso o media ponderale?Per il resto la coreografia e' d'effetto i comandi touch anche i lettori scheda sono perfetti e una porta usb 3.0 in più fa sempre comoso. Con i dovuti ritocchi sarbbe un'alternativa valida e poco ingombrante da adattare a qualsiasi case.
Trustpilot
2 months ago
3 weeks ago