Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard chrome plated spool. Adjustable cartridge relief. Open center, and power beyond available. 4 Position Float Spool for loader boom. 4 Position Regen Spool for loader bucket. Standard: Top In, Out and Power Beyond. Standard: Open Center (Power Beyond Port Plugged).
T**W
Exactly what I needed!
This replaced the AICO loader valve on a 1980's tractor. It was pretty much a 'like for like' replacement except now the hoses connect below the valve.The instructions require separate Pump/Tank/PowerBeyond connections for a tractor. Since I don't have an inlet to the tractor's sump available, I installed this valve the same as the old valve that lasted 30 years, in series, with Tank Out going to the In port on the tractor's 3-point-lift and PBY plugged. This isn't ideal practice, the pump can face back pressure at its Tank Out port that substantially exceeds Prince's specification if the tractor's implement is lifted while using this valve. I saw the gauge max instantly, beyond 4000 psi, when pulling a valve handle and the tractor's lift handle at the same time. Conclusion: Don't Do That! Respecting that limitation, this valve should last 30 years.This model has Float. I consider this feature essential, for leveling earth. (push handle beyond Down and the bucket is free to follow uneven ground as you back-drag.) I didn't see any advantage to buying the more complex joystick version. A valve with Regenerate for faster bucket dump would be worth the additional ~$100 if the loader were used all day.I've used this valve for a couple of months now. Operation is flawless. Recommended.
J**N
A good replacement valve
I replaced the worn out Cross valve with this Prince valve. It was easy to install. I replaced a worn out valve on my dozer with a Prince valve several years ago and it performed very well, so I replaced the worn out valve on my loader with a Prince valve and I am very pleased with it.
A**K
Great MADE IN USA valve!
Great valve - we used it for a compact Kubota tractor hydraulic front blade. 1/2" o-ring inlet and return ports. 3/8" o-ring work ports.Compact size is nice and the valve is not too bulky and is reasonably lightweight.Made in USA quality too!
A**R
What a disappointment, now I have to order another handle for ...
Picture shows two handles but description says one handle and only one handle comes with it. What a disappointment, now I have to order another handle for 9 bucks. Should send one for free. What a real disappointment!!!
W**R
Five Stars
upgraded hydraulics,worked well.
D**N
Five Stars
Perfect
Trustpilot
5 days ago
2 days ago