OSMO Polyx Hard Wax Oil .75 L (25.3 Fl. Oz.)

This is the coolest stuff. I don't know why more people don't know about it - it's way easier to use than poly, is food-safe, and can give a unique, almost silky (not sticky) feel to wood surfaces. I used it to finish my butcher block cabinets, but I've also seen it used on fine furniture and it's just a beautiful finish. My contractor didn't believe that you basically just rub it on as if it were an oil, then lightly sand it after it's dried with very fine grade paper (I wet sanded it) before rubbing in the second coat. It's durable and easy and creates a finish that isn't tacky (in any sense of the word).

This is Beautiful Stuff! I had shaped wood floors, and now they are like new! I sanded my floor with 80 grit then 120 grit. I used 2 coats and so far it has held up better than polyurethane. Easy to take care of and highly durable! I got the clear, and it goes on so easily. I used a varnish brush, and it levels and seals the wood so well. Holds up to our high foot traffic and resists water.

I was unsure what applicator to use and how long to wait to recoat and whether to sand. Maybe it's me. I need to reread the micro print on the can. I think I put it on too thick as it felt a little sticky the next day. Or I didn't wait long enough. The drawers look good after a bit of high grit sanding and buffing.

Easy to use. Beautiful finish. Highly recommend this product for furniture pieces.

I decided to try OSMO Hard Wax after having a very unpleasant time using Minwax Tung Oil Finish on a previous project. I was completely blown away by how much better this product performed. The minwax tung oil finish had VERY strong and lingering noxious odors, and it irritated my skin many days after it cured. This OSMO Hard Wax oil gave me no irritation, and was close to no odor at all, especially after drying!! As for the application, I used non-abrasive scouring pads. I scrubbed the liquid in extremely thin across the whole surface using the scouring pads, and (this is critically important) scrubbed away all excess using clean scouring pads and paper towels. If you apply it wet and thick and don't scrub+absorb it away immediately, the "wetness" on the surface will dry into an undesirable thick wax on top of the surface.. If you apply it minimal+thin, scrubbing/working the product into the wood, it will cure perfectly. I did two coats total, 1 day apart from each other. The drying time was SO quick, I was able to get 2 coats in in 2 days, to a fully cured/dried result. No odors, no stickiness, just a perfectly finished surface.

Great product - when you figure out how to use it. Your surface MUST be sanded to at least 180 grit (and I mean thoroughly sanded), even against the grain to open the pores. You have to pour on more than you think and spread it around with a utility blade - don't bother with a rubber or plastic spreader - you need to really scrape Osmo into the open pores. Just when you think you're done, pour on more Osmo and hit it wet with a white 3M non-woven surface conditioning pad. This will scrub the Osmo into the pores and the grain. Let it sit for 10 mins and then use your sander again with a CLEAN NEW white surface cond. disc. "Sand" the Osmo in until you have a really nice surface. Let it sit for a halfhour and then rub the surface with a terry towel. Now, do the same thing over for a second coat and you will have AMAZING results

First off... I love OSMO's other Satin Polyx, the OSMO 3043 Satin Polyx Oil. It goes on easily with a pad (or brush apparently) and is very forgiving with a beautiful finish. This 3054 Satin Polyx Oil on the other hand is very difficult to use. It is much thicker/sticky and left lines throughout my project. It also took longer to dry. I used the same pads that I use with the 3043. Now, I'm not a professional so, maybe I did something wrong. I'll stay with the OSMO 3043 Satin Polyx Oil for its ease of use.

Had wanted to try this for sometime. I have used several other similar products and i can say this does a nice job. I do like that you don't have to mix it with a hardener like you do some of the others. Don't really love the smell but that's not really a game changer. The ease of use and final finish were very nice.

A great product, easy to use and a great looking finish.