12FT 18AWG Power Cord Pigtail 3 Prong Open Wiring End Heavy Duty SJT Replacement Power Cord Cable NEMA 5-15P Male Plug, Power Cable 10A, 1200W at 120VAC

The Wago wire connectors are a nice touch

My XPower FC-100 fan came with a 6' cord. Just two ends and no middle. I had a larger XPower fan with a 10" cord. I replaced the 10" cord with this 12" one. I then replaced the 6' cord with the 10' cord from the larger fan. They both work better now in that they can be placed in more advantageous positions. The fans' ground connections were crimped in a way that had to be cut off but the line and neutral cord connections were crimped in a way that could be squeezed from the side to open them so the crimp connectors could be reused. I used 3 of the 4 recovered crimp fittings on one fan and the 3 lever connectors on the other fan. So much easier and more secure than wire nuts in my opinion. I've found some number of electrician installed loose wire nuts that had loosened over time causing arcing, electrical noise, flickering lights and devices switching off. I don't anticipate lever nuts loosening like that since they are spring loaded so can cope with expansion and contraction. The wire and connector capacity far exceed the draw of the fans (0.6 and 1.0 amps)

Excellent, as good as normal high quality cords.

The cord works fine and looks sturdy and heavy duty however ten easy connector provided is 2 wire connector whereas the cord is 3 prong

Easy to set up

Perfect. I installed it on my Fender Deville 410 amplifier. The old one had the ground prong missing. The connector devices were handy as the let me splice on the terminal clips from the old cord without having to fire up the soldering iron. Cord is heavy, good quality. We'll worth the price. Arrived fast too.

Buena inversión,

Yep...old school. Battery-powered tools cetainly have their place. I have some for sure. I also have older but high quality (Milwaukee 3/8 and 1/2 drills, etc...) that work perfectly but needed the tattered )and dangerous) power cords replaced. This cord fixed them right up...needed a little solder work to terminate at trigger switches and route through strain reliefs but that's not much of a challenge if you're handy enough.

Would really recommend this if you want to fix a power cable. Quality is promising, 12 feet’s too much long so I need to cut it a little bit and it works good.The three terminators are good to have if you don’t know how to deal with the wiring, but it won’t be a good idea for using in a humid environment such as kitchen, I would suggest to use heat shrink tube instead.