CAMPBELL HAUSFELD WL021100AV Manifold Assembly This part replaces obsolete part #: VT036100AV, WL029700AV, WL017601AV and WL017600AV.This manifold assembly is specially manufactured for Campbell Hausfeld compressors. The manifold kit consists of the manifold, the regulator, two pressure gauges,two quick-disconnects, and the nipple that connects the entire assembly to the tank. This part is compatible with the following machines:EX800701AJ Compressor4B222E (2007) Speedaire 4B222E (2008) Speedaire TF214800 (2005) Gasoline TF214700 (2005) Gasoline DP45517C (2005) Wheelbarrow DP4460TA (2005) Stationary WL506208 (2003) EX800003 (2003) EX800003 (2007) EX800301AJ (2005) 5.5 HP Wheelbarrow VT VT633000AJ (2005) 5.5 HP Wheelbarrow VT VT633001AJ (2005) 5.5 HP Wheelbarrow VT VT633200AJ (2005) 5.5 HP Wheelbarrow VT EX801300AJ (2005) 5.5 HP Wheelbarrow VT EX800502 (2005) Oil Lubricated FP201201 (2005) Oil Lubricated FP201202 (2005) Oil Lubricated EX800700AJ (2004) EX8011 (2004) Oilless EX801200 (2005) Wheelbarrow VT VT635300 (2005) Wheelbarrow VT EX801800 (2007) Wheelbarrow VT EX820000 (2004) EX8302 (2004) EX840300 (2005) Stationary XP581000 (2005) Stationary XP581501 (2005) Stationary FP201255AJ (2002) Oil Lubricated HS781003 (2005) Stationary TF291202 (2005) Stationary TF291203 (2007) Stationary HS781003 (2006) Stationary HS781004 (2006) Stationary HS781002 (2003) Stationary HS781003 (2004) Stationary HS781004 (2007) Stationary TF291201 (2003) Stationary VT635600 (2006) Vertical VT635700 (2006) Vertical HS781003AJ Stationary TF061903 Stationary XP581501 Pump
| Manufacturer | Campbell Hausfeld |
| Item Weight | 1.3 pounds |
| Package Dimensions | 9 x 3.5 x 2 inches |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
| Batteries Included? | No |
| Batteries Required? | No |
R**C
Air Compressor Manifold
The item was a perfect fit. It worked great!
D**M
Good valve and gage set.
Had to adapt this valve set to a different, older compressor and it works great. Probably better quality than the original.
A**R
Four Stars
Bolted right in place.
C**Y
Happy so far
Works on my Husky 3HP 80 Gallon vertical compressor I bought from Home Depot several years ago. The model number was different on mine but this is an exact match. The only thing wrong with the original was the regulator valve developed a leak and you can't just replace it, but for $25 what the hell. Will probably buy a backup just to have on hand.Happy so far, no problems.
G**.
Complete waste of money to buy this crap
JUNK! I bought this to replace the factory one on my Husky Pro air compressor. This started leaking for no reason. I didn't adjust pressure or anything. It just started leaking while I was using the compressor. I messed with the regulator some and it eventually stopped after about 6 hours. I'm going to remove it and throw it in the trash. I'll build my own regulator and tap off the side. This is way too restrictive. Set it at 165 PSI to maintain 100 PSI line pressure with a 3/8" 50 foot hose. . Complete waste of money to buy this crap.
A**R
Very good product.
Very good product ....... no problems since installed the unit......bought 2 extra just in case and seems like I will not need them for a few years down the road.......
W**D
Worked perfectly
I was tired of replacing the flimsy plastic regulator knob on my old Sanbourn compressor. I ended up removing the overpressure valve from the old manifold, connected this to the port with a "T" (reinstalled overpressure valve onto other port of "T). So far working great. Construction of the manifold seemed solid enough, but not sure of accuracy of gauges.
J**F
Two Stars
doesnt quit fit right and the gauges are cheap as hell
Trustpilot
2 weeks ago
2 months ago
