PNW Components Loam Lever Dropper Remote (Grey/Teal, ISpec EV)

Exceptionally solid construction and smooth operation. The Wolf Tooth remote is fine for my gravel bike but this is much more substantial and will be better suited for my Nomad. Worth mentioning the Wolf Tooth uses a single bolt through the middle of the lever pivot for the entire assembly, so unclamping or removing the remote means the whole thing kind of comes apart. PNW separated the clamp mount with a separate small bolt, so it’s a little less hassle to remove the remote and not have to reassemble it each time. If you’ve never had a dropper or installed one before, this comes into play when you need to pull your post out of the seat tube for any reason...you need to unclamp from the bar to generate enough slack in the line/housing for it to come out. If you have to reassemble the remote each time, well, that’s just an extra few steps...

It's well made and all aluminium with a bearing instead of a bushing and seems well made honestly.However, for $70 + it's really not that much better than what came on my 2019 stump jumper or 2020 levo.The lever on my stumpy and levo isn't all metal, the housing is but the lever is what seems like a nylon like they make pedals from. And the actuation between the two levers feels almost identical. The Level on my stumpy has a return spring as well so if your dropper doesn't have a strong spring in the mechanism it will always come back from being pushed in.I do think this Loam Lever is a more robust offering and should last longer and the build quality is great. But $70 is a lot of money for what you get over some other offerings. I think $50 for these remotes is more reasonable, even for the wolftooth. Though I haven't tried that one admittedly.I bought this lever because I bought a PNW Bachelor 150mm dropper for my Turbo Levo because the stock dropper was about 1/2 inch too tall as there was no more insertion room left to put it into the frame further and the bachelor has a shorter inerstion length.However, After installing I noticed that the Bachelor takes WAYYY more force to actuate the lever. I checked and double checked that it wasn't the cable and the cable was silky smooth, it was the dropper's mechanism just takes a lot of force to use.I figured maybe they designed this Loam Lever with a better pully ratio to make it easier to push in but after installing it I don't notice any improvement sadly. I even used a brand new cable in the housing and lube the inside of the housing.When you have the Bachelor dropper and the Manic dropper out of the bike and just try to use your figer to actuate the mechanism on the dropper port its self, the Manic is so easy and smooth where the bachelor I can't even actuate it with my finger, its too hard to push in.Not really impressed with the two PNW things I've bought so far to be honest. But they seem made sturdy and should last so I won't take away too many stars.

This has been a great upgrade for my Fox Transfer dropper post. The large surface area is much easier to find on rowdy sections when you are bouncing around. My thumb also appreciates the soft pad. I ordered orange because it matches perfect with my blue and orange Ibis Ripmo frame. I have recommended this to several friends who have also purchase it and are happy. It was easy to install and I really appreciated that they included the cable. The packaging was outstanding.I also ordered the Wolf Tooth components remote at the same time for comparison. I ended up sending the Wolf Tooth back because (1) the touch point is machined metal grooves, so it is very rough on the thumb when you are not using full fingered gloves (2) it did not include a new cable like the PNW (3) I thought the functional design of the PNW was better. It was also a bit odd to me that the wolf tooth was just shipped in a bag with no real packaging to keep it from getting damaged in shipment.I am really enjoying the PNW dropper and am glad I made this upgrade. I only gave it 4 stars for "Value for money' because it, like all dropper remotes, seem over priced to me.

I really prefer the "under the bar push-in" style dropper remote lever to the "on top push-down" design and this one is the best I've seen. I love it the adjustable pull with the over-sized barrel adjuster and the machined groove set screw and plate, and there is even another screw to set where the back of the lever bottoms out. You can get as picky as you want with it and get it to move just like you want it to. The ispec clamp fit tight into my shimano brake mount, awesome, one less clamp to clutter the bar if you like a cleaner look - I do.I didn't initially think a teeny pad for your thumb comfort would really be a thing, but it is! its just tactile enough for a good tacky surface but firm enough to not make the push feel squishy. It's just a great product all the way around. The only gripe is 60+ dollars is a big price, even in a market of comically overpriced items like mountain mikes, I purchased a whole replacement m8000 XT derailleur for cheaper than this simple lever.. haha! But I've already forgotten about the money and I love the way it improves my ride on varied technical terrain so much I'll put one on any other mountain bike I buy. It's a premium product but I think it's worth it.

Super irritated. $70 dropper lever. Ordered the Ispec ii in Orange. Was really excited because it was 1 day shipping and I needed a new lever for tomorrow. Received the grey one with the 22mm bar clamp. I have a ride planned for tomorrow so I have to install it and now I’m stuck paying $70 for something I didn’t want. To make it worse I can’t return it after using it so I had to pay another $15 for an Ispec ii clamp for my new lever that was supposed to come with one and have this grey thumb pad that sticks out on my bars like a sore thumb.

Overpriced ! Not sure I can justify the cost, but it's definitely of the highest quality and performs accordingly. I wish I had bought the 25 dollar knockoff that works just as well for 1/3 the price.

A few things to discuss here, almost all of which is positive. First, what I love about this...Ride improvement: simply impossible to adequately describe. I upgraded from the default 'drop down' lever supplied with the Rainier post, which functioned well enough, but felt awkward & uncomfortable to use. With the Loam, dropping the saddle feels as smooth & organic as changing gear. Quality of ride improved beyond belief. Worth 5* for that alone.Fitting: ridiculously easy! Whether upgrading like me, or fitting with a new post, fitting is as easy as it gets.Which brings me to the only slight negative. The colour! The grey anodized finish of the aluminium has a slightly greenish tint. This initially put me off, but I decided to fit it anyway, as I liked the grey rubber pad on the lever. I did consider exchanging this for the Wolftooth remote, but decided to try it out after much deliberation. Upon installing, I actually loved the look of it, as it matched my Ergo grips and suspension lock out. Also the Loam has height adjustment in the lever, which the Wolftooth doesn't.All things considered, the colour issue was not really an issue at all for me, so 5* it is. I highly recommend the PNW Loam lever.

Used this dropper lever on two bikes now. It initially replaced the lock-on grip remote on my Specialized, and was such a game changer.When I got my new Trek, the Bontrager lever immediately broke - the grub screw was not set and it pulled off the cable end when I actuated the lever. After fixing it, I found that the remote was SO hard to push to actuate the dropper post. I promptly swapped the PNW lever from my specialized with the Trek one, easy 5 minute install and BAM. It is the best feeling dropper lever I have ever used, so clean, so easy to push.You can easily adjust the bite point of the lever with the small grub screw which pushes the lever's starting position out a little, as well as adjusting the cable tension.All in all, this is the best dropper lever on the market, and I highly recommend it. Only issue is I have the wrong colour (orange) for my new trek (slate blue)!

Ordered grey/grey, received teal/grey. Does not contain any means of clamping the cable in place in the sealed box. Not end of world but something this expensive, where attention to detail is meant to be a company value, loses instant points for me as it is not fit for purpose. Ordered because needed it for a trip this weekend to replace a broken lever so also annoyed I have not been able to easily get up and running again due to being let down with this order. Appears a well made product otherwise but will be returning and going elsewhere.

The Loam Lever is a beautifully machined lever which works smoothly & weighs in at 46gI brought this to replace the standard Fox Transfer lever that expired in a crash. The Loam Lever is much better ergonomically for me and is smoother with a lighter action (both with new cables). The large thumb contact means the lighter pressure feels even better as it is spread out over a wide area making this a joy to use. I’ve tried a few levers and this is the best, although at the price, it should beLikesThe rubberised orange pad feels great if you don’t wear gloves (& still looks good if you do)The cable is supported in a machined radius (so should last longerDecent size bearing should mean it stays smooth for years to comeDislikesSharp machined edges on rear will slice through flesh (shouldn’t come into contact with them but you never know)Angle of the cable ferrule could be changed to give a better cable runIt’s expensive but quality costs...

It was ridiculously easy to install - crazy easy. My cheap Brand X dropper now feels like a really expensive one thanks to the smooth action of the Loam Lever. Can’t recommend highly enough!

The kit looks well finished and there is a cable in the box which it good but they were no scew to block the cable which is either missing from the box or... I don't know. Luckily I had a screw that fitted it.Desappointing at this cost

Bought this to replace a broken lever on my Fox Transfer post. Seeing as both retail for a similar amount the Loam Lever is by far the superior one. Much more ergonomic, uses a bearing rather than a bolt on bare metal and has more adjustment. Pricey but you can see the quality in the construction.

This leaver is a proper bit of kit, much better than the Fox Remote

A massive improvement over the default 'push-down' type lever that came with my KS LEV Integra.Very well-made. Easy to install.A small upgrade that makes a surprisingly big difference to my ride.

Cracking bit of kit. Replace my Fox transfer lever, so much smoother and the trippy pad makes it easy to operate. Well manufactured and thought out.

Beautiful bit of kit. Pricey, but you definitely get what you pay for with this lever. Very smooth action and solid build. Would recommend

Stylish, great colour, well machined and smoooooth! I spec 2 bracket also very well made. Great product!

Arrived promptly. Exactly as described.

Great bit of kit but should also have the screw and bush for the matchmaker clamp

Fantastic upgrade from my original pnw bachelor lever