SPARES2GO Glass HEPA & Carbon Filters for Dyson Pure Cool Air Purifier Fans

Seemed to be as good as original Dyson

Does the job good airflow and lasts better value than original

There is not much too this review. The filters are a touch rough around the edges, as in they will not be as smooth fitting as the originals. The carbon filter looks very similar to the originals. The "hepa" outer filter is just a paper filter compared to the original.

The outer glass filters fired into the covers no problem. But the inner carbon filters were more difficult. The plastic prongs on each side that should clip into the fan housing didn’t and instead bent back in on themselves with slightly alarming stress whitening of the plastic that normally means failure/breakage is imminent. As a result the outer filter couldn’t be fitted on first try. I carefully bent the prongs to be pointing slightly outward and gently, but firmly, flexed the filter to make the open end wider, clicked one end in place and kept pressure on the filter to keep the same shape as it was slid into position so that when I let go the filter relaxed into its normal shape and the prongs slid in. Took a couple of goes to get it right. After doing that to both sides the outer filter and cover clipped in place no problem and the fan is working with no problems. As these are half the price of Dyson official ones the little bit of trouble was worth it. But definitely be aware of the stressing and potential to break the prongs in the carbon filter.

I bought this as a replacement for our Dyson Pure Cool, and it fit perfectly. Installing it was simple and straightforward. Once fitted, I noticed straight away the airflow felt fresher, and the fan was working just as it should again. No strange smells or anything off just clean air. It’s a more affordable alternative to the Dyson-branded filters, but it still does a great job. We’ve got pets and small kids, so having decent filtration is important in our house, and this one holds up well.

Returning, doesnt fit, never had this problem before

Dyson have stopped making this filter which means a machine in perfect working order would have been useless if it wasn’t for the fact I could buy this compatible filter. I fitted it without any problem (personally I cannot see the difference between this & the one I used to purchase from Dyson!) I reset the machine & my machine is doing its job & I don’t have to buy a new machine for hundreds of pounds or, more importantly, send a perfectly good machine to landfill!!

Chose these because the plastic on the white filter matched the colour of the originals (and of course the cheaper price!). The white filter doesn't have the fine mesh that helps dust being sucked right in to the filter, so whether that reduces the longevity of the filter (assuming you're not being governed by the Dyson telling you to spend more cash) remains to be seen. Pain in the backside fitting but reading the reviews and seeing the advice .. Don't put the white filters into the plastic casing first, rather put them in and put plastic casing on after is very sensible advice. I'm not sure if the wihte filters, or the carbon filters are more curved that they should be .. so I did slight flex the carbon filters so I could eventually squash it all in and get the white filters to clip in place ..It's a fine art! so have 30 mins handy. Once all in, seems to be fine and haven't yet been hit in the face by a flying plastic cover .. so that's good news.

Excellent easy fit and my Cool Air is healty again!!

Quello a carboni non si innesta correttamente

Très bien ça fonctionne

Les filtres sont les mêmes que ceux d'origine .La marque dyson indique être en rupture de stock (de longue durée....) .L'appareil indique une saturation des filtres même après leur remplacement par des filtres neufs.

È difettoso non fa chiudere il blocco é da rimandare indietro. Sono rimasto male articolo scadente