RIOTORO Mid Tower Gaming Case with Clear Window Panel, Full ATX Support, 120mm Case Fans, and Seven Internal Drive Bays [CR480]

First off, the build quality is above average BUT seeing as this case is around 50$, you kinda have to forgive the case for cutting corners.The Bad:The side panels only use 1 thumbscrew to keep them in place, and are finicky to put them back on the case, the rear side panel has no hump (like in other cases) to allow wiring to have some room, the fan layout is lacking and will produce problems for hot components as airflow needs to be tinkered with for reasonable temperatures, the top fan spots (in my case) will cause some PSU wires to the CPU_PWR on my motherboard to be squished (again, this might only be because of my motherboard's layout, it might not happen to you.)The Good:Really build friendly, wiring was a breeze for me, even with an ATX board, Red LED in the front is a nice touch, and acts as the power light, Dual USB 3.0 ports on the front panel is nice, bright HDD Activity light, rubber feet on the bottom add extra ground clearance and prevent vibrations, PSU Fan filter is a big plus, AiO friendly, easy to install both harddrives, and optical drives with an easy swap semi tool-less installation process, easy to remove bay drive covers.TL;DR: You get what you pay for, but this case ain't too bad if you can look past some of the negatives, Oh and make sure to use either high airflow fans, or high pressure fans, because the airflow isn't too good in this case, it's not the worse, but it could be better.

I bought this for my son's setup and was, admittedly, looking for something that didn't break the bank while still being good enough for his gaming needs. This fit the bill even better than expected. The airflow is great and even when he's gaming heavily, there's cool air flowing out. Granted, we did buy fans to fill the additional bays, but it was doing okay even before those were installed. I've bought cases in this price range before and have always been disappointed in one way or another; not so with this case.There was plenty of room for his Nvidia 760 card, which is 10.5", and the drive bay layout was sensical and easy to work with. There was plenty of room to hide the cords away too. I was impressed by the depth of the side resevoir. My Antec 902 case is large, and handles the cords, but you have to pinch them in. I didn't have to do that with this case.So, if you think this will fit your needs, I don't think you have any reason to hesitate clicking "Buy". This is proving to be adequate for gaming, looks snazzy, and has good build quality. I'll be looking at this company's other products when I decide to replace my Antec case.

I really like this case!I like that the power supply sits at the bottom of the case.I like the sleek smooth curves and matte black finish with the hint of red.My ATX motherboard fits the case perfectly!I didn't understand how to install the quick release hard drive holder, but they did send a nice example of a box (with contents) installed in the spot, so you can visually see how it works. I was excited and pulled this out without realizing that was its purpose, but I ended up getting it installed.The 2 fans, intake and output are a decent size to ensure good air flow.Plenty of space for my 11.75 inch long GPU. (Make sure the PCI slot is towards the middle of the mother board this is where theres more room for the length of the gpu.)The red LED's at the bottom of the case are pretty rad too. I wasn't expecting those when I bought the case.One downside is, the instructions were only in Spanish. But, the layout was pretty easy to guess at and get correct.I would suggest buying this case if you're looking for a simple clean look.

About the easiest case for cable management I've ever had. It's not that it's incredibly easy--there are some tight spaces. It's more that the slightly-smoked window only covers the motherboard area, meaning craptastic cable management with wires shoved haphazardly under the hard drive is not a problem.Seriously though, the case is very well put together and sturdy. The design choices make sense, although I'd like to see a second fan mount in front. Rubber gromits on the cable management holes would also have been a welcome plus. That said, there is a lot of room to work with, it's very easy to build in, it looks great, and it's deceptively small. For comparison, I've got an NZXT S340 Elite next to it, which is one of the smaller ATX mid-towers on the market, and this guy is a wee bit smaller. For those of us who want to keep our computers on our desk without having our computers become our desk, this is a case to look at.

Pros: Nice design, includes two fans, good value for the money.Cons: Only two extra motherboard standoffs included (not enough for a Micro ATX board, at least not enough for mine, as I needed three), fans are a little loud but not bad for coming free with the case, the HDD activity LED is bright white and can get annoying in a dark room, I had a hard time getting the motherboard I/O plate to fit real well (not sure if it is the case that is the issue or the plate itself).Bottomline: I probably would not buy this case again, but it is decent enough for the money. Next time I would probably spend a little more to get a higher quality case.

I found this to be a very nice case. It is a mid tower and the one serious limit is only 3 slots for hard drives. The plus is that it is a very easy case to work with. I've got kind of clumsy hands and fingers but little problem installing even a full ATX board in this case and reaching all the slots I needed to. The SATA slots were almost impossible especially once the hard drives were in. Not at all the case here.

I really loved this case as it came for standoffs and all the screws you need. However the case did not come with a manual but a qr code instead.. I tried going to the website for some information on it but it kinda forces you to sign up. This case also had a problem with my psu because the screws didn't line up right. (I was using a 430 watt evga psu) This case has a lot of room and could fit anything though! 4 stars!

Che dire semplicemente perfetto, consiglio di cambiare le ventole originali, silenziose ma muovono davvero poca aria.Ci entra di tutto anche dissipatore alti 160mm (il mio thermatake silent riing pro red entra alla perferione e rimane anche qualche millimetro) non vi fate ingannare dai 135mm segnati sul loro sito.Direi che è l'unico case tower mini itx dove si ci può far entrare di tutto. Ottima la gestione dei cavi e l'air flow.Dalle foto potete vedere tutte le modifiche apportate, anche il pannello laterale completamente trasparente.Unico appunto consiglio un alimentatore sfx, con adattatore atx (nel mio era già in scatola), anzichè standard atx per avere maggior spazio e aria per la scheda video.

This is definitly a great case for the price with a lot of cooling options. I really liked the look and build options. The only downside is the aluminium sheets that are used. They are very thin, I'd preferred to have paid €10-20 more for a really solid case.