D-Line 13.12ft Cord Hider Kit, Patented Cable Cover, Hide Wires on Wall, Channel for TV Mount Cords, Raceway Wire Hiders, Paintable, Adhesive, Half Round, 4X 0.78in W x 0.39in H x 39in Lengths, Black

The half-round profile blends in with baseboards very nicely, if you happen to need them there. If you were looking at them from a distance, they could both appear as a single, original moulding. When looking through reviews, there seemed to be a mix of people saying the adhesive was either too strong or a bit weak. I considered using some known 3M adhesives to sidestep either issue. However, I had completely forgotten about this until I had already started installing them. The units I received definitely had very strong adhesives, to the extent that they will certainly remove paint should they need to be removed. In our case, they are being run along the top of baseboards and this strength is far preferable anyway. This is in an area where there is a lot of movement and anything not strong would be worse long-term and there is no intention to move them around. Worse case scenario, touch-ups are not hard to do. However, if one may not be entirely sure about placement; it would be advisable to use a known, non-damaging adhesive temporarily or permanently. So far, I’ve not made use of the connector bits. Instead of using the straight couplers, I just left small gaps for future access. I only had one corner in the installation, but did not want to bend the coax cable enough to use the 90° coupler. The looks in these spots were not of concern anyway. I can see how these pieces would be cause for frustration if you are planning to need them, though. They fit loose and feel like they would easily come off. Was not a concern for us though. I’d buy again if needed.

I ran speaker wire through two walls to an outdoor patio. The space in the pictures was where the wires would have been most unsightly. I like the result. Not invisible, but nobody ever notices it either. When I call people’s attention to it, their comments have been positive. The biggest test came when I showed it to my wife who had been very worried about speaker wire being run along that particular path. She approved. The material is easy to cut. The options for corners and connecting multiple lengths make customizing the run simple. Painting is easy, as long as you remember to remove the plastic coating and scuff the surface a bit with fine sandpaper. The adhesive backing worked well except near the corners where the speaker wire had to make tight, ninety degree turns. There, the wire tended to pull the track away from the wall. A screw to pull the track tight against the wall near each corner did the trick. Even that might not have been necessary except that I was using fairly heavy gauge speaker wire that barely fit into the track. Overall I’m very happy with this purchase and would recommend the product.

I attached a terrible picture I’m sorry. I was able to fit 4 wires in one tube, which wasn’t easy bc the wires I needed to hide were pretty thick and wide (coax cable, hdmi, cable box and tv plugs). The coax cable was already stapled to the wall above the heater by the cable guy so it was too tightly secured to fit fully into the tubing which kinda f*ed things up for me. So I wasn’t able to fully close up the tubing all the way down, and had to leave a section opened. I’ll tale better pics tomorrow during the day to illustrate that better. The adhesion was great, I have no plans to remove the tubing anytime soon so I won’t speak to it’s removability but from what I could feel initially, this thing is going nowhere. The tubing closure could be slightly more secure and tighter, to accommodate thicker cables, but so far it’s holding up. The color matches my wall as well as it could. We have a baby coming soon and this tubing helped get a whole mess of loose and hanging wires under control. Not to mention it’s jsut aesthetically nicer. We had run the wires near a curtain panel so they were pretty hidden anyway but this just makes it that much cleaner. I definitely recommend but I also definitely did not need four of these. I only needed one. So now I’m stuck with three of these giant tubes. Otherwise still a good buy and definitely helped. Oh.. pro tip: there is a clear protective film over The tubing you need to take off.

I needed more outlets in my bathroom so went with a power strip. However, this would have left an y slightly cord dangling from the outlet and getting in the way of the space there That’s where D-Line came in. Already lots of reviews and that’s what made up my mind. The size of cord they would take was just big enough for the power strip cable and the adhesion worked really well. I stuck this onto a glazed brick and it is solid. The product was well made and did exactly what it should do. It stuck well, covered the cable, made it look neat, and appears will last a long time. Make sure you have something to cut to length. I had some large tin snips that works well, otherwise have a saw. Also easy to place to go around corners and came with just enough corners covering pieces. If you have lots of corners to go around, buy another pack or two of just those pieces.

Works well. Easy installation.

I bought two packs of these to use in my garage to conceal the wiring for my garage door opener. Of the 7 of these that I used, only two of them had an issue with sticking initially. Eventually I was able to get them to stick and they haven't come back off YET, but the others stuck just fine on the first try. This product comes with a good amount of parts to attach the rails to each other, and there was only one angle that I needed that wasn't included, which was going from the top of the wall running horizontally to the ceiling. Other than that, this is an awesome product and has made my garage look way nicer.

Does the job, with some limitations: There is printing on the inside of the tracks with manufacture information, 4/5 of it is advertising the manufacturer, the remainder looks like a date. No safety information like material or temperature rating which could be useful. Waste of ink and, unfortunately, they took no effort to ensure the printing did not go all the way to the edge . Three of the four rods had printing right to the edge and my particular installation had a few eye-level installs and looks really bad. The useless printing would be better served on the removable film from the front or the tape on the back. The tape itself seems ok but it's very thick and this prevents a true wall-flush install and kind of accentuates a shadow behind it. I did use the tape but if I were to do it again I'd probably just try to dissolve the tape off and staple the covers directly to the wall through the soft plastic. Last complaint are the corner covers. It's very very thin cheap material and very finicky to attach and remove from the rails. They do an ok job but I don't think they'd survive an accidental boot or runaway rolling chair. Considering these covers are serviceable by opening, I'm a little dubious at how much servicing I'll be able to do before these corner covers fail. Some of the edges also had some flashing that I had to remove as if it were a model kit, and since the kit itself is kind of stingy with the number of these corner covers I found it fairly annoying. It's a bit of a shame because having a cord cover that can be installed without disconnecting any cabling, and cables changed after install, is pretty killer. These were quite a bit more expensive than the alternatives and I don't feel that extra cost really went into the product care and quality.

I really like the easy access to place cords / wires into the D channel. The material is easy to paint and looks great when done. I highly recommend this product.

It's really perfect, wish if there is more with a good offer so I can get as I need, price was a little bit high, but these D-line was very helpful and it's stick on the wall strongly.

This was the perfect cable cover package to run two microphone cables up the wall. It's hard to find longer cover pieces like this package offers, and in a cream colour that closely matches our wall. The cover was just big enough to fit the two cables, which makes the final installation quite subtle in appearance. And the included connector pieces work really well to make joins and corners look better. To minimize wall damage and ensure strength, I elected to use screws instead of the adhesive backing.

I can't say enough good things about this cable management system. I bought a home with an already finished basement, so an in-wall wiring system for my home theatre was not an option. I set up the AVR at the back of the theatre, so I had to run 3-12 gauge speaker wires and one 28AWG HDMI cable from the front of the room to the rear, about 40ft. of cable. This system definitely fit the bill. Yes, all of the wires fit inside the channel. Everything is completely hidden and all that's left to see is a new baseboard!! :) So simple to use and does the job wonderfully! I actually need more now.

Fantastic product. Easy to use and assemble. The connectors are a good fit. The glue on the system is super strong.

Nice