WEICHUAN Black Round Solid Wood Sofa Couch Chair Ottoman Loveseat Table Dresser Cabinet Furniture Legs Wooden Furniture Feet Replacement (8" Set of 4)

I bought this to add a little height to the AMERLIFE Sectional Sofa: https://www.amazon.com/dp/B0BZLB1169?psc=1&ref=ppx_yo2ov_dt_b_product_detailsThey look good. They're a teeny bit bigger on top than the stock legs that came with the sofa, so they stick out maybe a few millimeters, but it doesn't really bother me.The threads fit almost perfectly. The part that screws into the couch is a little long, but if you turn hard enough, there's a tap on the other side that will pull it up into the leg and you can get it flush with the bottom of the couch. Warning, at one point I took a leg off and the tap/screw got stuck in the couch and I needed some pliers to get it out. Fortunately it wasn't stuck too bad.All in all I'm satisfied. For the whole couch it was about $100 worth of legs. Seems like way too much to add an inch of height, but I guess when it comes to sofas you should expect to overpay for everything.

I bought a matching reading chair and ottoman set but didn't like that the ottoman was shorter than the seat, which angled my legs down. The 8" legs screwed right into the screw holes that were already there and made it level. Luckily no more assembly than that. The legs are sturdy, solid wood and they also added some weight to the ottoman so it doesn't slide around. They arrived with some minor bumps and knicks in them but the black paint is intact and they're unnoticeable so I don't mind. I'm very happy I found these!

I deviated a little from the instructions by predrilling all the holes for the screws, but this was so easy. I was able to put 10 legs on my 2 cabinets (4 corners and middle support) in a matter of minutes, and they look much better now. Highly recommend!

If you're brand new to modifying furniture or using any tool more complicated than a butter knife, like I am, you may be surprised to discover what comes in this package. I thought I'd be able to unscrew the old bun legs off my couch and screw these right in to the same place. I was so, so wrong. The screw hole for the old legs went directly into the wood frame of the couch, and was too small for these. There was no metal plate on the wood (cheap stuff, I know) so, I needed to attach the plate that comes with these legs to the frame of the couch. Don't be like me and put the "outie part toward the floor, thinking you'll be able to screw the leg over it. All you're going to do is over-tighten it, it will still look weird, you'll undo it, strip the inside of your new leg, go looking for a solution in the garage almost glue your eye shut with gorilla glue, realize that's not going to work, panic a little bit, end up gluing the little black cap into the now too-big-hole in the leg, mash it all together and vow never to sit on that corner of the couch.Insteadddddd, use a 1/2" drill bit to make a proper hole in the wood frame of your furniture that the outie part of the metal piece goes into, so the whole circle is flush with the bottom of your furniture. Then use a Phillips head bit to secure the metal circle with the three small screws. Once you've done that. You can easily screw the leg into the center hole, be gentle so you don't over-tighten it.Very important lesson I learned tonight: when you're using the large bit to make the hole for the metal plate and there's pieces of wood flying everywhere, your boyfriends drill starts smoking a little bit and youre pushing as hard as you can but the freaking hole just won't get deep enough...it's not that they used some kind of super-reinforced extra-hard magical wood on that one corner, your drill is probably just on reverse. So, check that first before you decide to call the whole thing off and resign yourself to sitting on the floor.5/5 stars I really like these legs on my couch. Would be cool if they included instructions.

Ordered these to replace some legs on an ottoman. Excellent quality. The metal threaded post was smaller than I needed but it came with an adapter that was easy to install.

These are good quality legs made from some Chinese hardwood. The paint is good. I wish the hanger bolts were installed a bit more precisely. They had to turn these on a lathe, how come NONE of the bolts were exactly on center, nor were they installed parallel with the body of the leg?Regardless, I needed to remove the existing hanger bolts, redial the holes and install new 10mm hanger bolts for my specific application. Legs can be expensive. These were reasonably priced and delivery was fast.

Used them for a couch they work great.

Replaced original plastic ones. Now more sturdy. Wife now has the perfect place to sit while she rubs my feet.

Absolute GARBAGE product! The legs are not sturdy at all and do not connect at all properly with the parts given. No instructions are provided with them either. I tried attaching these to a small ikea shelving unit I have and they wouldn’t not screw in at all and literally ripped out a small piece of the wood on the shelving unit. Stay away from these! Never order anything furniture related from Amazon!

Très déçu ,les pattes ont une belle apparence mais les ferrures d installation sont très minces , elles ont tordues et le vissage est devenue lousse et impossible a la première utilisation .J ai du acheté des ferrures plus solides a la quincaillerie . Beaucoup trop cher pour la qualité.