Amazon Brand - Eono Universal Soundbar Bracket, Fit Soundbar with/without holes under 9KG, Use Alone on Wall or Mount under/above TV with TV bracket or TV stand, for Sonos, Samsung, Sony, LG etc

I combined this with a "FORGING MOUNT Long Reach 1090mm TV Wall Bracket Mount", to mount a Sonos ARC under LG OLED C2 55" , giving a nice clean install.You could pay more, but I'm not sure why you would.I did drill new holes to mount bar to perfect height.By default for this combination, there was either a gap of about 1-1.5 cm between the soundbar and tv, where the arms of the mount were visible or the alternative a little too high where soundbar was pressing against the TV.Drilling new holes with a standard steel drillbit took only a few minutes and was worth it to get the right height. For me that is not a big deal, for others this might put them off.

I have a 55" Philip Ambilight and this just about fit, it's pretty tight as I wanted the soundbar as close to the bottom of the TV as I could overall a sturdy product and all the bolts/screws/washers came in handy.

As described

Good Product, used to mount sony hta5000 of about 120mm length, soundbar rests on a bracket, it cannot be fastened as this particular soundbar has mounting holes which are about 37 inch apart but you can hold the soundbar in place.M6x16 screws and washers supplied to fasten to back of TV are of poor quality. As this mount is fixed to only bottom set of screws on the back of TV, it sits between TV and wall mount bracket, this introduces 2mm of space between TV and TV wall bracket and its also missing good quality spacers to plug that gap, overall product quality can be 2 levels better.Not very sturdy mount but does the job!Sanus mounts are of better build quality but they are not suitable for sony hta5000 as the mounting holes were 37 inch apart.

Initially when opening the package it appeared like a daunting task. But after laying out the pieces on a surface and consulting the instructions, construction was fairly straight forward. Plastic spacers and washers and M screws are all provided. I paired this with a wall mount I already had in place for my Sony KD55X89JU television. The sound bar I am using is a Sony HTSD35. This sound bar mount was perfect as the HTSD35 only has key hole mounts, I was not keen on drilling more holes in the wall.I recommend doing this with the TV lying face down on a large soft surface, trying to do this with the TV standing up would be awkward. Reading other reviews I see some people had issues with screw points that don't line up, I can report on this specific TV I had no issues with this. The mount is very configurable and is capable of holding relatively large/heavy footprint sound bars. In all the once constructed this is a very solid mount and even at loud volumes there are no issues with vibrations/rattling.I would give 5 stars but there are some down sides to product. There are no clear channels or guides for cable management on the two vertical beams. Not the end of the world, some black electrical tape can be used to secure them to the rear of these beams.

TV is on a cantilever bracket to allow it to be pulled away from the wall and rotated to face into the correct position. The soundbar bracket was straightforward to assemble and, with a little trial and error in finding the correct screw holes to use, secure to the TV bracket. This means the soundbar now matches the angle that the screen is rotated to. Whilst it's fairly sturdy, there is a slight downward tilt at the front of the soundbar as the horizontal support bar is thinner steel than the struts that fasten to the TV bracket. Overall, it does the job and is good value. Lots of options to select mounting holes and an excellent array of mounting screws, which come with the bracket, make it straightforward to fit.

Great product, good quality .

Bought this to hold a newly purchased sound bar. Did the job to perfection . Looks good, easy to install and great value for money. Highly recommended.