VHT SP187 Gloss Black Wheel Paint Can - 11 oz.

Did the job I needed to do.... Used it to paint my motorcycle tank and front guard... Perfection and no issues... Chip resistant and no fading. Recommend to use the vht clear gloss paint to give a beautiful finish

worst paint i’ve used

Absolutely astounded by this product. I wanted to paint my rims black but didn’t wanna use plasti dip got sick of it. This stuff is worth every penny. Lays on real smooth didn’t run at all. I feel if anyone had a problem with this stuff it’s cause their prep work wasn’t right. I just used a scotch pad and make sure all the clear was off. No shine what so ever. Gonna get ceramic coated once the paint is fully cured. Great product well worth the money.

Great product, sprays very nicely with no dripping or orange peel. Make sure to shake for at least one minute before use. Super fast flash time of only 5-10 minutes. I painted on a warm day and only took about 5 minutes between coats. However, save yourself a lot of money and go to local autozone. Price of 11.99 per can compared to 20 on Amazon.

Be patient both:1) when spraying. this is thinner than paint and if you spray too much at a time it WILL run/drip. Instead, be patient and do a couple light coats with 10 mins between them. Its better to spend the time and do 5 thin coats, than to rush and do a coat too thick and mess up your whole job when it drips.2) Curing: this takes a WEEK to cure. I live in Texas, its hot, and my wheels were in the garage 3 days. At that point I could, and did, put a scratch in the clear coat and VHT paint on my rim with my fingernail. Be patient and if your able to, dont drove or allow anything near the wheel for a week. After 7 days, these felt like new wheels from the factory.PRO TIP: My rims came out looking amazing. BUT, I wanted extra protection and shine.After it cures, a week minimum after painting / clear coating, you can wet sand this with 1500-2000 grit sandpaper to smooth it out. After you do that you can a. add more clear coat if your paranoid like me. OR, add compound and buff this. This will make the wheel really pop.Again, just spraying and allowing it to cure looked great. the wetsanding and polishing is for extra shine / smoothnessenjoy