Husky Liners — Rear Mud Guards | Fits 2019-2024 Ram 1500 w/out OEM Fender Flares - Black, 2 Pc. | 59141

Look great after installed. I've use Husky's Mud guards on a few vehicles I've owned though the years and they do hold up to the real world of driving and I'd buy again if I needed more. Only thing is the back screw you need to install, don't trust the 3M tape, really, it's useless. One thing I did was use one of the existing nutted headed screws you remove for install of the flaps to use later on the inside back edge of the flap behind the tire. and installed 1 of the philips head screw supplied with the flaps on the outer edge and use the nutted screw on the far back edge of the flap to hold it tight to the liner securing the flap in place. Do not count on the 3M tape to hold the far back edge of the flap. What I did was slipped the screw bracket onto the wheel liner and drilled my hole next to it from the back side of the liner, pretty easy to do and saves having to remove the tire. And I slide the bracket over the drill hole and used a #8mm socket on a 1/4" ratchet and tightened the nutted screw through the bracket because of the tire being in the way. It's secured and no noise rattling from there, just a tight fit to the liner so you won't have any problems down the road. I'll include some pix of what I wrote and tools I used. That's the hardest thing to do and you don't have to take the tires off to install the flaps. They look great on my new Ram 1500 Limited Elite 4X4. And the flaps fit as they should, nice and tight, won't come off easy at all. The first flap should take about 15-20 minutes and them the rest go pretty fast. It took me about an hour + but I cleaned everything good before applying the supplied clear tape that's goes on the edge of the flare, so the flaps plastic doesn't rub the paint off or whatever. Enjoy!

These were easy to install and a great fit. Shipping took a little longer than originally expected, but happy with the final product. I would recommend.

The mud guards fit my 2020 Ram 1500 perfectly. The included double-sided tape was sufficient for the front guards but it fell on a gap in the plastic on the rear guards. Luckily, I had some heavy double-sided tape available to add to the flap in a place where it would make contact with the wheel well. Overall, it was very easy to install and they look great. It took me around 20-30 minutes to install all 4 guards.Note: Be sure to purchase the correct set. There are two options. One is for truck equipped with fender-flares and one without. I believe the fitment issues in some reviews are likely attributed to this.

Fit perfectly

Good price, easy install, fit and look perfect on 5th gen ram..