30A 40A 50A 60A 80A 100A 150A Audio Circuit Breaker Auto Car Stereo Inline Fuse Holders Inverter, Manual Reset 12V-24V DC for Automotive Marine Boat Audio System Protection (80A)

I installed this due to my trolling motor shutting off at high speeds. This not only fixed the problem, but this lasted through a storm with waves crashing over the back deck, flooding the boat and I was able to use the trolling motor as the bilge pump worked. Highly waterproof and highly recommend

Easy to install, marine quality product and great value.

As the title says, I used this on my ebike battery build. I mostly use it simply as an on/off switch for the battery terminals, but it doesn't hurt to have the added safety of the breaker. In my situation, the BMS on the battery should trip before this breaker, so this just serves as a backup.

Works as it should and got and finish is good.

This is waaaay better than getting an in-line fuse.You NEVER have to buy another fuse again, because it has NO fuse .Also, you can cut-off the power to you amplifier, if you need to adjust your cross-over sound settings for your mid-rage and high speakers.My sub is a 15-year old Infinity BassLink. And I am running it with a Pioneer AVH NEX-2550 head unit. My stuff is BANGIN' HARD now. This is because the 30-watt blade fuse I originally had under the hood was weak and restricting proper flow to my amp. With this breaker my 15-year old sub sounds waaaaay better. I never new it could BANG that good. And sounds cleaner too.===========INSTALLATION was a breeze.1) - UN-hook just the positive cable and put the terminal on a cloth so it does not touch any metal by accident2) - Strip about 1/2 inches of the protective sleeve off the Audio cable for both the ends that will go into the Fuse Breaker Switch3) - Jam the wire as far as it will go into both ends of the breaker4) - Screw down the wire cables with an allen-wrench.5) - Make certain to have the clear and red protective caps screwed back on for a water-tight seal6) - NEVER, EVER install this breaker close to your amplifier.You just need to install it as close as you can to the car battery. About 6-inches of cable or so.7) - For SAFETY, I made certain to have the breaker switch in the "OPEN" position BEFORE I attached it to the battery terminal.8) - Connected to the battery terminal. Turned on the car and radio.9) - Closed the breaker switch10) - Viola!All done, son !!===========ADDITIONAL NOTES :For my 200 Watt amplifier, I got a 40 AMP.IMPORTANT: Make certain to get just the right amp amount that SAFELY matches particular wattage of your amplifier.NOTE: Purchasing too high of an Amp for the breaker is like having NO protection at all.Hope all this helps.

Seems to be as good as anything. I would buy again.

does what it said, easy install, may want to go a bit higher on amp just tom be sure.

Product 30 amp fuse purchased November 2022. Same issue as another user.Used on a 2022 trailer from the 30 amp solar controller to the battery. Unit failed catastrophically, pole bent, frozen fused in open switch position and circuit disconnected.