TOPSKY Dual Motor Standing Desk Frame, 225 lbs Capacity, White | Dual motors, 225 lb capacity, memory presets, anti-collision Height 27.6"-47.3", width 43"-59"

Just got this delivered and put together yesterday. For the actual desktop surface I just used the same piece of wood from my old Ikea desk ($50). For anyone who is reading reviews trying to see if this desk is better than any of the others, I would highly recommend this one because of the dual motors. Most other standing desks in this price range either have no motors or only one motor. With only one motor to lift the desk up and down, you can imagine that it would have to work twice as hard. The first thing I did when I put this desk together was lay on top of it and raise it all the way up. It lifted me (160 lbs) up with no problem and I have no doubts it will hold my setup just fine. The noise the desk makes is pretty quiet. I'm using it in my house so it's not a problem, but if you were installing it in an office I don't think it would annoy anyone else near you. I'm 6'3 and the tallest setting is still too high for me. I would say this would be tall enough for anyone under 6'6ish. At max height it's still very sturdy and way more sturdy than my old cheap Ikea desk. Putting the desk together was very easy and straightforward. I was able to do it solo by myself in less than an hour. If you had someone to help you could get it done in 30 mins easy. Comes with all the tools you need besides a screwdriver. I would recommend using a drill when you screw the legs into your desktop though, because it might be tough to do with a normal screwdriver depending on what your desktop is made of. I'm just using an old Ikea table so it was easy, but if you're using a butcher board or any other thick piece of wood you would probably need a drill. Also comes with extra hardware incase you lose anything while assembling. I also love that they included some cable management things like cable ties and little 3M stickies to keep the cables from hanging down. I got myself some cable management trays from amazon to hold all the cords from my computer, monitor, PlayStation etc. Overall Im really happy with my purchase and would highly recommend to anyone in the market for a standing desk. Ill try to come back in a few months and update this review to see how its holds up over time. Thanks for reading if you got to the end maybe you would press the helpful button so more people can see this review? Thanks!

Whilst looking for a sit/stand desk I was put off by the majority online having a fairly thin two piece top plus ideally I wanted a custom size to fit so decided to make my own from pine planks that were then stained and sealed. Luckily I stumbled across this perfect solution for the desk legs. I forgot to get pics of the packaging but everything was superbly packed minimizing the risk of damage, the instructions were easy to follow if a little on the small size (I realized later that there is a video online apparently) but assembled it pretty quickly, It took me longer to work out how and where to hide my wiring than it did to put together. I tucked in the control unit rather than have it stuck out so much, I think it looks neater and also prevents accidental knocks. It has up and down buttons to position the desk at the height you prefer and three memory position buttons (very handy) along with the 'S' button to store those settings. My desk is 65.5" x 29" which is a little longer than is recommended for these legs but I made it work. Operation is very smooth, I love the fact that there are 3 memory settings, I have the lowest set so my chair can fit underneath with its arms down and the highest to suit my standing height. I've been using this for two months now and believe it's well worth the money if you want to go down the same route building your own desk or buying a top of your choice. I originally intended to buy an adjustable height desk to put my small refrigerator underneath but this looks so good I've scrapped that idea and gained the extra leg room, I also use it at standing height more often than I thought I would.

Researched height adjustable desks and found out dual motors are the way to go. After looking at a lot of models and choices (both on Amazon and online), went with this one. Best value for the price and so far so good (one month using). I usually sit in the mornings for meetings and stand in the afternoons for tasks, etc (at least 2 adjustments each day). SETUP: Instructions are clear and took me only 30 minutes. Do read them and take time measuring underneath before drilling into your top. The default settings are 70 (minimum), 90 (middle), 120 maximum/standing). I didn't need to make any adjustments as these default settings were fine. PERFORMANCE: It is pretty quiet and moves fast. Most importantly its smooth and performs like its built to last (benefit of the dual motor). CUSTOMER SERVICE: While showing off my desk to my brother the control locked up and was stuck on the lowest setting. I called TOPSKY customer service and spoke with Frank. He sent the manual PDF and suggested I do a manual reset. Easy quick and resolved. MY SETUP: Since I went with the white dual motor I wanted to cut the cost of the table top (seen online for over $100+). I went to IKEA bought the LINNMON white table top for $17 (found in the clearance/returns 55" x 29.5" x 1.75"). I prefer the deeper tabletops verses most you see online at 24" due to having more distance of your eyes to the screens and allows more room for keyboard, mouse, Ipad etc. I bought the "Scandinavian Hub Under Desk Cable Management Trays" for under desk wire management and even though it says not compatible with LINNMON tabletop (found out after I received it and not that obvious on Amazon) I still gave it a shot and so far no issues. I pre-tapped the holes with a narrow drill to the screws and didn't drill the screws in tight. $230 for the DUAL motor desk, $19 for the wire management tray, $17 for IKEA tabletop = $266 all in.

I had about a 59" space between two closets that I wanted to fit a desk for work. I ordered a custom walnut top to fit the dimensions and then this Dual Motor Electric Adjustable Standing Computer Desk to put it on top of. Since I already have one sit/stand motorized desk I already understood how things were connected so putting it together was a breeze but it does come with specific instructions and a link to watch a video if you need help. All the parts and pieces were in the very well packed box and nothing was damaged. I have photos of the underside how I attached wires and as you can see everything is in it's place. I love the autostop function as my other desk does NOT have that. You definitely need that one these desks as you can accidentally leave things sitting under them and the desk to should come to a complete stop if it detects anything. Also, one thing you must look at when you purchase one of these desks is the LOWER HEIGHT value - why? Because some of us sit in a much lower position --most desks like this are great if you like 29-32" heights; but some of us like 27" in a sitting position max. The lowest setting on this desk is 27.7" so be aware of that AND other cheaper versions you'll see - make sure you check your seat to keyboard height - it's probably lower than you think and then check the lower setting on the desk you are looking at. The selector on this desk has three settings you can easily lock in. I've been using desks like this for over 4 years - you usually only need 2 settings unless you share the desk. I put a 26"x59" top on it. Love the desk, its a great value.

Have not assembled. Arrived fast in perfect condition. Well packed for transportation. All pieces; hardware, legs, feet, cross braces confirmed by visual check against list in manufacturer instructions. First impression: 4 support tangs welded onto center area of horizontal cross brace appears to be better design than other competitors' that only focus towards ends and top of legs for mount points. Good flexible electrical insulation on cordage. Dual Independent motors are factory installed, securely mounted, protected by channel pockets in leg railing, looks stout. * Have NOT noticed any visual scratches marring bent etc. in this product. All hardware +1 spare screw ea size included Confident TOPSKY Desk Frame will perform as advertised! * Overall extremely impressed appearance weight and top quality materials in the build. Area weight calculation is simple. I purchased 1'' bamboo table top Desk frame max weight capacity 225 lb Subtract nominal 72 x30 x1 '' bamboo top = 2160 sq '' / 144 (cu foot) Table top surface = 15 sq feet Weight per manufacturer 39.99 lbs. Desk frame Max load 225 - Bamboo top 40 = < 185 lb remaining My situation 185/15 = 12.33 per sq foot evenly distributed.

Honestly, I really like this standing desk. It’s sturdy, quiet, and can handle a good amount of weight without any issues. I’ve got a dual monitor setup, speakers, and some extras on it, and it still moves up and down smoothly without feeling unstable. My only real gripe is the cable situation. There’s not much built-in for cable management, so unless you add your own solution, the wires just hang there and look kind of messy. It doesn’t affect how the desk works, but I wish they had thought that part through better. Also, the height controller works fine, but it feels a little fragile. One of the plastic pieces on mine snapped during install. Not a huge deal, but it’s something to be careful with. Other than that, it’s been great. It does what I need, and I’d still recommend it. Just plan on tidying up the cables yourself and being gentle with the controller.

I've wanted a powered sit/stand desk for a long time so I was glad to find this Topsky dual motor model at an affordable price. I made due with a manual lift desk before but it put a strain on my back when lifting it up and so I didn't use it as much. I'm using this one alot more! It took some effort and time to assemble but it was well worth it! It's best if you have another person to help with the assembly. Based on another review, I purchased a butcher block top from Lowes which is 72-in x 30-in x 1-1/4-in. I applied a couple coats of clear satin varnish to it. This is a very solid desk and supports both work and home systems. It was easy to set the controller up for 3 different positions. You can hear the dual motors when it's operating and it sounds really cool! The only complaints I have are that the instructions were in very tiny print and difficult to read and I wish the controller wire was a little longer to mount the controller on the very end of the desk so I won't bash into it with my chair's arm rest. I may decide to set the controller back under the desk more to avoid getting damaged. That's another advantage of this desk- you can customize it to what works best for you!

I purchased the TOPSKY Dual Motor Electric Adjustable Standing Desk and it has completely transformed my work experience! The black frame is sleek and modern, fitting perfectly into my home office. The dual-motor system makes adjusting the height incredibly smooth and quiet—no more annoying clicks or jerks as I shift from sitting to standing. I love how customizable the height settings are, allowing me to find that perfect standing position, which has significantly improved my posture and overall comfort during long working hours. Assembly was straightforward, with clear instructions that made the process a breeze. The desk is sturdy and stable, even at its highest setting, and I appreciate the ample workspace it provides. Overall, this desk is an excellent investment for anyone looking to enhance their work environment. I highly recommend the TOPSKY Dual Motor Electric Adjustable Standing Desk to anyone—it's been a game changer for my productivity and well-being!

Was fairly skeptical when I first purchased this desk frame. I knew I wanted one with 2 cross sections so it would be sturdier, but still expected it to be fairly wobbly once it was in it's full up position. Not going to lie, this frame is performing better than I expected in this department. To be fair, it's got a slight wobble when you really grab the desk and shake it when it's completely up but not enough to make me worry about it. It was very easy to assemble (I bought 2), the first one took about 20 minutes alone with only a screwdriver and the second took me less than 15 minutes with the help of an impact drill. (Careful not to over tighten the screws!). There were extra screws in the package and all the holes aligned perfectly. I was also impressed that the top I purchased (from another company) had pre-drilled holes that fit exactly the holes in the frame, so I didn't even have to drill holes anywhere. The motors are quiet and the speed is plenty acceptable. The only complaint I have (and I'm being picky here!) is the buttons on the controller are a little stiff. The advantage is that you wont accidentally move the desk if you bump on the controller but the downside is you really need to make sure you press firmly on the buttons to move the desk. All in all,very satisfied. My only doubt right now is with how long the motors will last, I'll post an update after having used the desk a few months

Debated about ordering one for ages, researched loads out there but decided on this one as it has dual motors and i`m glad i did. Probably not the cheapest on Amazon but i bet it`s the best, comes really well packaged and protected, really easy to assemble just take your time. I re used an old desk that i bought from IKEA which is basically a box with draws in, removed it from the old metal frame and sat it on this one and it`s solid as a rock. My office chair will not slide fully under a normal desk as the arms are too high but this cures that problem, set the 3 heights i need, one for sitting, one for storage and one for standing. Works brilliantly and is almost silent when running, don`t think about it just get one you will not regret it, i don`t.

This set of table lets are amazing and a perfect fir for what i needed. The quality is superb and it looks sleek. The adjustable up and down setup is nice. I purchased a home depot hardwood kitchen table and installed it. Now i have such a high quality table.

This desk frame is definitely worth the five stars. The packaging it comes in sets the standard and is almost a joy to unpack. Easy to assemble and extra screws and bolts just in case you misplace them. The claimed noise level of 45 is more like 50db which is still quiet enough to not be noticed on a phonemail. I love the fact that I was able to buy a second hand solid oak top from marketplace and install it onto this frame given it a quality and unique feel. Very sturdy in use. Im 6ft 1 and can lean on this without it moving with it quite high. I sent a query about the collision control to customer services on a Sunday afternoon and had a reply in a couple of hours completely resolving my question. Impressed all round

Compre la base poco más de un año y la llevo usando 8 meses, los materiales son de excelente calidad y los dos motores que tienen funcionan excelente cargan poco más 35 kilos de equipo de computo es decir: un par de monitores de 27 pulgadas con su respectivo soporte dual para monitor de la marca VIVO (https://www.amazon.com.mx/dp/B01N2YFO5Z), 4 bandejas de gestión de cables de la marca PAMO (https://www.amazon.com.mx/dp/B08N1HX647), un par de bocinas y otros accesorios, es fácil armarlo te recomiendo tener herramienta en general para que sea más fácil, le agregue a la base del escritorio ruedas giratorias de la marca uxcell (https://www.amazon.com.mx/dp/B07DVCKRYT) ojo el diámetro de la cuerda del tornillo es de 8 mm y le quedan excelente con esto es muy fácil moverlo a la hora de barrer o limpiar, en mi caso le puse una tabla de madera de parota de 2 cm de espesor, 60 cm de ancho y 1.60 cm de lago claro que la tabla la lije para quedara lo mejor pulida y use aceite mineral para resaltar la beta de la madera, ajuste los tornillos del escritorio y el control a la tabla, y quedo de maravilla, agregue un soporte de gabinete para PC ajustable de la marca HumanCentric (https://www.amazon.com.mx/dp/B079RZBK1Y?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8) y los tornillos que trae el soporte hice un ajuste en la tabla para esconder los tornillos para que no se notaran, con respecto al control de la altura trabaja bastante bien solo en una ocasión de trabo es decir salió el error rES E-1 pero fue fácil solucionarlo con el vídeo (https://www.amazon.com/ask/questions/Tx10X0VM54O1G25/), en general me gusto muchísimo la base del escritorio y como quedo mi set de trabajo, la verdad recomiendo la marca y no te arrepentirás de la compra, si tu trabajo o pasas bastante tiempo en la computadora de verdad este escritorio vale cada peso además de que puedes trabajar de pie que es bueno para la espalda y piernas.