KIT10

The BOSS Audio Systems KIT10 4 Gauge Amplifier Installation Kit is an excellent value for anyone looking to install an amp without spending a fortune on wiring. The kit includes everything you need—power cable, ground cable, RCA cables, fuse holder, and accessories—all packaged neatly and ready to go. The 4-gauge power wire is flexible and easy to route, but still feels thick and durable enough to handle solid power delivery. The RCA cables are decent quality, with minimal noise interference, and the inline fuse holder adds an extra layer of protection. I had no problem getting my amplifier hooked up and running smoothly. For the price, this kit makes the whole process straightforward and saves the hassle of buying each component separately. It’s not just convenient, it’s reliable—everything worked as expected and my system sounds great. If you need a complete, affordable, and dependable amp wiring kit, the BOSS KIT10 is a fantastic choice.

Seems to be good quality so far and the length of wire worked out great in my son’s 2006 Chevy Silverado 2500hd. It was a reasonable price compared to other kits I looked at. Fast shipping. Thanks!!!

Purchased with BOSS speakers and amp, everything you need to install. Works perfect!

The ring terminals are absolute trash, otherwise it’s fine

The kit was extremely easy to install and for the price you really can't beat it. The kit came with everything you would need the fuse and all of the prongs and things you would need to wire up some sub woofers. The 8 gauge is perfect for your average sub system; I plan on purchasing the 0 gauge kit later. I would definitely recommend especially if price is a factor. I have never had a problem it works extremely well and the cord lengths were perfect and just what you needed. The wiring was extremely flexible and you could put it just about anywhere. Of course if you decide to go all out on a sub system I would go with something bigger but this works perfect.

Cable quality is good. Sound quality is nice. Very easy to use and install fit my vehicle perfect with extra has grommets and zip ties included.

Great price good quality

Overall a good deal, but you definitely need to order a size up in order to get the actual gauge you need. I think they may getting away with calling it an 8 gauge kit because the ring terminals and fuse holder included are for 8 gauge wire. The ground wire is not too short. For those that are new to how electricity works in a car, you are supposed to ground to the chassis, not run it all the way to the battery. Almost every other electronic device in your car is grounded the same way. Even the engine grounds to the chassis. The bad: I ordered the 8 Gauge and, as others have said, the actual wire is much smaller than 8 gauge. I used 10 Gauge strippers on it and didn't nick a single strand of wire. It also matched the size of some 10 Gauge I had left over from a previous install. The speaker wire that comes with this kit is also under sized with extra insulation. It's closer to the size of wire I would expect in a cheap boombox. The ring terminals and Fuse holder are for 8 gauge wire so you will have to strip double the length and fold it over to make it fill the hole and get a good crimp (not the best choice but it's better than not folding and getting a loose crimp which is dangerous) or buy some 10 Ga ring hardware. Also, the included fuse looks like it would be way oversized for an application that would use 10Ga power wire. I'd advise getting a proper sized fuse so it will burn out instead of blowing out your amp or starting a fire if anything goes wrong. The Good: This is still a pretty good deal for a long piece of 10 Ga and an RCA cable. Since they're passing 10 Ga wire off as 8 Ga, they put a super thick insulation on this. It will be much less susceptible to shorting out due to rubbing while being pulled through holes and under panels during install and wear less over time from rubbing on the edge of something due to normal vibrations. The kit also includes rubber grommets so, if you prefer to drill a hole in your firewall instead of cutting into the rubber around an existing cable pass-through, you will not have to worry about the metal edge rubbing through the insulation. I can't really attest to the quality of the RCA cables. I hooked them up and they work. My subs are in too large of a box right now so they are boomy and the sound quality sucks so the RCA cables don't make a difference. After I put them in a box with the right airspace I will find out. Overall it's a decent kit. Just make sure you order a size up and make sure you get a properly sized fuse. Don't expect the guys at Wal-Mart to know what they're talking about. Research it or go to an audio shop and ask.

I bought this but was wrong gauge for my amp! You get the full kit, ties clips wire protective cover so on that merit I've given 5 star. It seemed like a solid piece of kit. I did get it for one amp but then decided on another amp hence why I didn't use this. Remember, the gauge of wire is dependant on the watts for the amp. Do your research or you'll have a few problems!

4Gのケーブルでバッ直ラインを構成する為に購入しました。色合いも派手でいかにも感が良いですね。

Il kit contiene: - Cavo rosso (per il positivo della batteria, da 10 mm2) - Cavo nero (da attaccare al telaio, corto ma è più che sufficiente) - Cavo REM (da attaccare all'amplificatore) - Cavi RCA (molto utile visto che i 2 connettori RCA vengon poi raggruppati in un unico cavo, ottima fattura) - Tubo di plastica (l'ho usato per rivestire il cavo rosso all'interno del cofano) - Capicorda, fasciette, connettori vari e accessori (molto utili) - Cavo per autoparlanti - Porta fusibile e fusibile da 50 Ampere Acquistato per montare un subwoofer da 600 watt nella mia macchina, i cavi son davvero buoni ed è un kit di ottima qualità. Consiglio vivamente l'acquisto, non vi deluderà.

Excelente producto

i used this kit for a subwoofer install. the spade connector was a little small for my car battery terminal (Australian 2003 corolla). i had to bend it to get it to fit, but it's fine. a second large ring connector would have been great. you will need a crimping tool because the cables come un-terminated. the inline fuse holder is a little rudimentary, but it works. the split-loom tubing makes for a professional installation. getting the power cable through the firewall grommet wasn't easy - i used a straightened out clothes hanger to lead the cable, and silicone spray while running it through (highly recommended).