EWK Camshaft Crankshaft Alignment Timing Locking Tool for Volvo S40 S60 9995452
Product ID: 2235569
Product description Application Models Volvo 700, 800, 850, 900, 960, C70 Coupe And Conv S40, S60, S70, S80, S90, V70-2000, V70XC, XC70, V90, XC90 Engines 4, 5, and 6 cylinder engines Engine Code B4164S, B4164S2, B4184, B4184S, B4184S10, B4184S2, B4184S3, B4184S9, B4184SJ, B4194T, B4194T2, B4204S, B4204S2, B4204T, B4204T2, B4204T2 CVVT, B4204T3, B4204T3 (USA)(CDN), B4204T4, B4204T5, B5202FS, B5204FS, B5204FT, B5204T2, B5204T3, B5204T4, B5204T5, B5234FS, B5234FT, B5234T2, B5234T3, B5234T4, B5234T5, B5234T6, B5234T7, B5234T8, B5234T9, B5244S, B5244S2, B5244S4, B5244S5, B5244S6, B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5244T7, B5252FS, B5254FS LH 3.2 , B5254FS M 4.3, B5254FS M 4.4, B5254S DENSO, B5254T, B5254T2, B5254T3, B5254T4, B6244FS, B6254FS, B6254GS, B6284T, B6294S, B6294S2, B6294T, B6304FS, B6304FS2, B6304GS, B6304S3, GB5252S, D4192T2 Review: Great set for the cost - Great set for the cost. Worked perfectly on a Volvo C70 I had to do a head gasket on. Through other dealers a set like this can cost up to $500.00. Recommend highly Review: All the tools in the kit are very good quality and exactly what is needed - Has everything you need to align the cams with the crank. All the tools in the kit are very good quality and exactly what is needed. If the engine does not run right when you start it up, it is not the tool. You have to go back and read the procedure. It is not the same as doing an engine without VVT. The camshafts have to be held in one position while you twist the VVT sprockets to their correct position and then install the chain.
| Manufacturer | EWK |
| Brand | EWK |
| Item Weight | 12.55 pounds |
| Product Dimensions | 9 x 3 x 9 inches |
| Item model number | EB0056 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | EB0056 |
J**N
Great set for the cost
Great set for the cost. Worked perfectly on a Volvo C70 I had to do a head gasket on. Through other dealers a set like this can cost up to $500.00. Recommend highly
E**D
All the tools in the kit are very good quality and exactly what is needed
Has everything you need to align the cams with the crank. All the tools in the kit are very good quality and exactly what is needed. If the engine does not run right when you start it up, it is not the tool. You have to go back and read the procedure. It is not the same as doing an engine without VVT. The camshafts have to be held in one position while you twist the VVT sprockets to their correct position and then install the chain.
G**S
worked great for 1/4 the cost
used to hold cams in place on 2000 volvo v70 2.4 . The aftermarket volvo site sells this for $200 which was not an option for me on a single use tool
D**G
great tool
perfect tool, was used and worked flawlessly
K**C
This tool broke the first time using it.
This tool seemed to be well but it broke after one use. The nubs that engage the slotted cam shaft end have developed significant cracks. I used a 3/8 standard length ratchet wrench to tighten the cam sprocket bolt in place. I do not feel comfortable reusing this tool again for fear that it will shear completely while I am tightening the cam sprocket. I was surprised and disappointed by this failure.
R**N
Not strong enough! Camshaft Holder Broke - see pictures
This is a complete kit for removing Volvo camshaft sprockets and timing the engine. Unfortunately the metal used on the camshaft locking tool is weak and sheared when using it on a customer's '05 Xc90. The T60 bolts that hold the camshaft sprockets are supposed to be torqued to 85ft lbs. This tool sheared off before I could loosen the factory-installed bolts on both the intake and exhaust sprockets. The crankshaft locking tool that's mounted behind the starter, worked perfectly. I didn't use the rest of the kit so I can't speak for its capabilities. I had to source another tool to complete this job from a local Volvo repair shop. Their tool was also an Amazon purchase and it worked great. I have since purchased one from CTA tools that worked perfectly on a different XC90, without fatiguing the metal. I was refunded by seller, but this could have bent valves if I wasn't paying close attention.
A**R
good tool for the money
had to make slight modification to make fit but for the money did what i needed it for well worth the money
J**E
good quality
worked perfect
Trustpilot
1 month ago
4 days ago