Siliconic Mould Making Kit - Clearcast Translucent Silicone for Silicone Mould & Resin Casting, DIY Craft, 10.6oz/240ml

Basic small mold kit. Well packaged with bottles including a secondary reusable neck plug to seal contents. Once mixed, no issue with trapped air voids, the silicone sets into a good representation of the master product with no loss of fine detail. Would buy again.

First time using a silicone moulding kit. Overall found it very easy and excellent results. Used safety goggles and basic mask, just to be safe. Windows open, but didn't notice any strong fumes during or after pouring. I didn't mix quite as instructed, slightly longer in fact. I mixed fairly vigorously for 4 min then very slowly for another 4 min just to give any big bubbles time to disperse. Poured slowly, in the same spot, from as low as possible above mould frame and this seemed to work well and helped minimise any bubble production. 24hrs later , set solid, no bubbles and I peeled out object leaving perfect mould. Would definitely recommend and use this make again. (DecorRom). Only negative, it's pretty expensive for amount you get. Make sure you have good idea of the volume of your mould and buy appropriate amount kit.

MATTE DESIGN VS SHINY BE AWARE! If you have a matte object youre making a mold of expect some troubles. I feel this silicone would work a lot better if your object is shiny, heres why: The surface "friction" i suppose is alot higher in matte surfaces compared to smooth shiny ones, resulting is difficulty getting rid of bubbles of which I had alot of issues with in this kit. Its such a shame it took me so much of the bottle figuring all these issues out. I made 3 molds of a badge I have, after the first one I assumed user error in having the design face down: my mistake in why bubbles where trapped in the design. Have your design face up (the bottle says this but I got it backwards oops) The second one face up MUCH less bubbles but annoyingly still some and I'm trying to have a perfect mold for producing these badges. So with basically the last of my silicone I made one more face up but using a bunch of tricks I searched online like stiring cautiously, using a lighter across the surface, putting it in the fridge, popping any bubbles with a toothpick ect. And i honestly see more bubbles then the second time! Don't get me wrong, the silicone works perfectly its just having these errors 3 times is expensive and frustrating and I think for my matte object I might need to keep experimenting but ive already ran out. So I hope my advice helps you not waste any of yours. If you're just trying out mold making I think this has been a great jumping off point as a beginner because these bottles are smaller but if you really are invested in the craft you will quickly run out so prehaps put in more money for a bigger set.

The 1:1 ratio made mixing very easy to use. I also found the fact that the silicone was transparent, made it very easy to cut down one side of the mould to release the master without damaging it. Also the material was soft enough to have undercuts, but firm enough to hold its shape when filling the mould with resin. Really pleased with the product.

Bought this for a project my son wanted to do.. it was good quality, it worked fo what he was doing. He loved using it.

I've had two batches of this stuff, the first batch was perfect, the second one, however, not so great, Bottle A I think was partially contaminated as half the contents of the bottle had turned into this very thick gel, and trying to get it out was very difficult. also, I think this meant that it was more difficult for any of the bubbles to dissipate, so I ended up with a kinda bubble filled mould that hasn't really worked out too well.

This is the first time that I have used silicon. I have made a number of faceted stone moulds to be used in my memorial jewellery business. Despite all the bubbles and me feeling like this would affect the overall finish of the tiny moulds I was surprised to unveil completely bubble free and perfect faceted stone moulds the next morning. I have only used the moulds a couple of times so I do not know how good the silicone will hold up to regular demoulding and resin use but so far I am really impressed. I have use this with both epoxy and UV resin. It is quite a cloudy finish however the UV resin cured without any issues so there is no problem with it penetrating the slight cloudiness of colour.

Product never set, even after 3 days of waiting

Real perfect

extremadamente blanda, le falta mucha rigidez una vez secada, ademas deja un resto muy muy pegajoso, (no es un problema para la resina, pero en canales finos tiende a pegarse las paderes y que el epoxi no entre por todos los canales. Para una pared correcta tiene que pasar de 3 cm, y aplicar talco para quitar la pegajosidad, con moldes con grosor inferior mucho riesgo de rotura del molde al poco tiempo o que no aguante el epoxi y se deforme, Quitando esto, el tiempo de secado, la transparencia son correcto, y ademas están bien para su uso con resina uv

Ich habe es gekauft um picky pads herzustellen und es funktioniert total gut, einfach, einfache Beschreibung. Härtet innerhalb 24h aus aber leider nicht wiederverwendbar als picky pad. Wenn man molds macht sicher auch gut. Ich werde mir bei Zeiten das große Set mit den Farben bestellen. Bin sehr zufrieden gewesen!

Good product!

Sono soddisfatto