Urbanic 070s Electric Coffee Grinder (110~220v) / flat Titanium burr 60mm / 20 steps can be set (Black) / (Made in Korea)

For the price, this grinder simply cannot be beat. Quiet, small, sturdy metal housing, flat 60mm titanium burrs, easy to clean and easy to use. Multiple colors to best match your kitchen decor. And a very precise grind.Some have mentioned it is not adjustable enough for espresso. It can be made stepless, if you are handy! See the attached image. I fashioned a ‘washer’ from a very thin piece of sheet aluminum - specifically, the sliding cover of an old 3.5” floppy disk. It screws on to the threads, and its diameter is the same as the diameter of the detent wheel. Simply screw it up all the way to that wheel. It will sit between the detent wheel and the spring-loaded detent pin.If you’re not handy, you can get the same stepless functionality by purchasing the Urbanic 080 grinder - though that unit seems to cost over a hundred dollars more.To those having issues with the finest grind settings: the way forward is to use the supplied “trap door” to slowly feed beans from the hopper into the burrs. I’m single dosing with this method, and it’s producing excellent grinds for espresso. With no clogging.

This is the best grinder I've ever had. Let me tell you why. It has a small footprint. The hopper is large enough for a family sized pot of coffee, and well designed so that beans flow into the grinder without getting stuck and jammed. It is easy and intuitive to unscrew to clean the parts. No tools needed. The grind itself is consistent. The noise is about half of that of every other grinder I've EVER used. The receptacle is also very well designed. It is stainless steel which cuts down significantly on the static, it has a lid that you can use to cover the contents if you grind the night before, as I do since I get up much earlier than the rest of my family. The receptacle opening is large enough to get your fingers into or clean with a towel, but small enough to securely dump the contents into a single serve french press. If for some reason, you chose not to use the provided receptacle, you can substitute anything that will fit into the receiving area. This is unlike most grinders that have a specific slide-in receptacle, and if it breaks the grinder is out of service. Truly, the only issue we initially had was that it is a bit tall. This means that it is difficult to pour beans into the hopper if it is sitting on the counter that has wall cabinets over it. We solved this problem by putting the grinder on a dishtowel and just sliding it out to fill, then back in. I expect this grinder to be a lifelong friend but if it ever does die, I would buy another.

This is a fabulous & mighty little grinder. Bought my 1st after watching a YouTube review by Lance Hedrick. I’ve owned mine for 3 years & I liked it so much I bought one for my sister too. It grinds everything without complaining. I prefer coffees on the dark end of light roast up thru mid medium roasts (& occasionally a very dark roast - with an ample dose of heavy cream:-)At startup it produces a pleasant low pitched whir and when I drop the beans, it grinds them quickly and evenly without any racket or drama.I bought the light cream colored finish for myself. It shows ALL the coffee staticy mess no matter how fastidious I try to be! I chose the dark gray finish for my sister’s grinder. It remains much cleaner looking even in the midst of the coffee-making process.I use it for French Press (modified James Hoffmann technique) & mocha pot. My sister uses hers for pour-over.I recommend this product, definitely.

After two weeks of using it once every morning I found there is nothing to dislike about the machine aside from the price(Canadian dollars) due to inflation etc. It's grinds fast and is very quiet. As a compulsive tinkerer I did a minor mod. to check the burr alignment and it was close enough to be perfect with the Titanium burrs. See the picture of the grinds with medium roast at various settings. I also devised a blower using a plastic pill bottle cut in half that fit perfectly in the hopper chute with a camera lens blower inserted through the center of the flexible plastic lid. Something to note is that after you finish the grind slowly wiggle the dial to a finer setting to unclog the burrs. So far the machine appears to be a decent quality home grinder. I hope this review helps others.

I fully expected to be disappointed but this is a very well made product. Kudos to the engineers in Korea. My only criticism is I wish the hopper was not made of plastic - it would be so much nicer if it were stainless steel or even better, glass. Very quiet, solidly built, much heaver and substantial than you would expect - very pleased!

See product review below. They sent unit #2 without a rubber piece. When I ordered unit #3 in 2023, I asked that they send the missing part. They didn’t. They said the rubber piece would be $22. You’d think a three time buyer would warrant some respect. Got none. They even said I didn’t order three. It just when on and on and I gave up. Bad taste.Original review:Ordered one for the USA and used it for a couple years so far. An excellent product giving us a reliable grind. It’s built solid and looks good. I liked it so much I bought another for use in France. I asked the seller to ship to me in California the French version 220V and I flew it over in my baggage. Works like a charm. And, the seller communicated with me to be absolutely sure I received the right electrical plug. Good packaging job and came so quick from South Korea, I think, that it was amazing. Solid grinder. Update: ordered a third one for another location.