MinwaxWater Based Helmsman Spar Urethane, Gallon, Semi-Gloss

This product I used to paint my house from door and kitchen cabinets, the quality of this product is very good, it dries quickly, is shiny, easy to use, and the price is reasonable. I like it.

This is a top notch product. The color is pretty much clear . I used it to make a back splash out of some reclaimed wood for my outdoor kitchen. I chose to brush it on and throw the brushes away after each use for ease of cleaning. I saw some reviews complaining about the coats but I had no issues just make sure they dry and lightly sand in between. I used one small can on the backsplash but since it’s outdoors I overkilled with 5 coats. It’s a great value for the money and looks great . I did not spray so I can’t attest to the spray quality but generally with poly I had always been taught that a brush was the best way to go. Although it’s not too thick so if you have a good spray it should spray just fine. The cleanup is super easy. I also made a small tabletop . It came out great as well. Both are holding up well to the elements.

I live this product . I use for refinishing everything and protecting my hammock wood which is outside year round . Used on very fine furniture in thin coats it has lasted and performed for thirty years without needed any care at all . I can also carelessly slab it onto my expensive hammock wood divider which I have had for 24 years now and it’s still in great shape . I have it on dressers and cherry end tables from 1930’s and an 1800’s rocker as well as all Cesar chests and milking benches from early 1800’s . I use the spray can it foam brush from the van for all old baskets to keep them pristine too. This way all is protected from moisture and water . I have put thin coats of it on 1800’s ice cream parlor chairs as well as cane seating with no ill effects . It makes cleaning and dusting so much easier . Also I no longer have to use coasters for drinks nor worry about light scratching of the wood . I love antique furniture . I love to seal in the character of the furniture with light hand sanding and seven thin coats of urethane on them is perfection . With this I have character and can also sponge off my furniture without worrying about dampening and lifting old varnish . Works incredibly well with a beautiful long lasting shine it brings out the patina and grains of the woods and straw. It’s easy to use and quite forgiving as well as easily sanded . The coverage is perfect . It is thick enough to apply without being runny or fussy . It adheres beautifully and no problems with fine bubbles . Adds depth and warmth and covers stain while adhering very well to both bare wood and stained wood . I have been using this product for eons on so many things . I have tried some others products over the years but this has been the best and easiest to use . I could not believe how well it liked in the caned seating . And the light coatings have not cracked nor peeled in years . I also used it for my papasan chairs . Twenty four years later they are still pristine !

Worked great! Used on new bench seats & Transom for my 1976 Valco. Came out just like I was hoping.I didn't bother sanding between coats. I just kept lathering it on every day. Came out very smooth/glossy with a bit of grit here and there (from not sanding) which is actually what I wanted for safety purposes.If I had to do it all over again, I'd still use this!

I used this for outdoor "yard art", specifically a few metal signs and then several wood signs our family painted. This sprays in a nice, uniform spray and covered very well. Of course part of that is technic so it doesn't pool and run. Still, gives a nice looks with protection. I've used this before and it will, over time and especially in the sun start to peel a bit, but I think it works well for my projects.

Wonderful finish on my solid oak table I'm refinishing over

Good Product.

First of all, the quart size can of spar urethane came in a not too well protected box. The can had dents in it, but the lid was ok. Probably not done in shipping, it looked like it was shipped that way. I opened the can to check it out and the urethane looked good, so I applied the urethane over previously finished 12 year old spar urethane. I used 220 sandpaper and lightly scuffed the surface before I applied. Of course I dusted, vacuumed, And wiped it with a damp cloth. After it was totally dried I applied the first coat with a brush. I read on one review where they had put the brush in a zip lock baggie between finishes, thanks that was a good suggestion. This was applied to a bar in my kitchen. I waited three hours and tested and it was not tacky, so I applied the second coat. Again waited three hours, and applied to third coat. I did no sanding after the first scuffing. I am no expert and there are some very small flows in it, (a few brush marks) not many though. When I applied with the brush if it felt like the brush was dragging so I loaded a little more on until it glided across the top. I didn't play with it I just put it on brushed it a stroke or two and then to finish I pulled the brush all the way across the finish one time then left it alone. It really came out nice, looks like it's underwater and it really brings the wood grains out. It does add a little amber color, but I think that looks nice. It says on the instructions on the can that it will do that. Anyhow that's my take on this Helmsman spar urethane. I gave it a 5 rating and definitely will use it again next time I need To refinish something.