Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set)

The hdmi cable you use must have good shielding and individually connected pairs, cheap cables with no shielding won't work

Setting up a webcam to monitor prints on my 3D printer remotely with a Raspberry Pi and Pi camera V2. Initially set it up using a 30cm long CSI cable, which worked but the colors were washed out and the video was quite laggy. Remembering I had these CSI to HDMI adapters, I thought I'd give them a try. Worked right away - no configuration changes required. The color was greatly improved and the video was now nearly full-time. I presume that the long-ish CSI cable was picking up interference which was somehow causing the video issues. Very happy with my purchase!

ラズパイ５とV3のカメラを繋ぐために購入。オレンジのカメラケーブルは使い勝手が悪いので、HDMIケーブルであれば楽に設置可能ではと思い使ってみました。ただし、３メートルの細いHDMIケーブルでは使用できませんでした。通常の太さのHDMIケーブルであれば商品説明のとおり長い距離でも使えるのではないでしょうか。１．５メートルの通常の太さのHDMIケーブルは問題なく映ります。

Anschluss war ohne Probleme möglich. Konfigurieren musste ich nichts. Die Kamera wurde trotz der Verlängerung ohne Probleme von OctoPrint erkannt und funktioniert genauso, wie ohne die Verlängerung. Man würde sich wünschen ein Gehäuse dabei zu haben, aber man kann nicht alles haben und dazu gibt es ja auch 3D-Drucker.

Works well as described. Fast shipment. Received within 2 weeks.

I just received the CSI to HDMI Cable Extension Module and got it working with my new Pi 12 mp HQ Camera and the video quality is excellent. I made a mounting plate out of 1/8 inch thick polystyrene to the same size as the Pi 12 mp HQ Camera pwb (38 mm x 38 mm) and mounted it to the back of the Camera pwb with 6 mm standoffs and 2.5 mm x 10 mm hex cap screws. Before I attached the mounting plate to the Camera pwb I drilled a hole pattern that matched the camera Extension Module hole pattern and mounted the camera Extension Module to the mounting plate. Unfortunately the included CSI cable was too short to connect to the Camera CSI port so I substituted a 6 inch CSI cable which is a bit long, but works. I may purchase a 4 inch CSI cable in the future to take up some of the slack. In the future Arducam might want to include an optional mounting plate that matches the Pi 12 mp HQ Camera O&M and include 6 mm standoffs and hardware for the mounting plate. The Extension Module can then mounted to an appropriate hole pattern on the mounting plate. Update: I just bought a second CSI to HDMI Cable Extension Module and it works just as well as the first one!